Chief SSM205 Bruksanvisning

Chief Projektor tillbehör SSM205

Läs nedan 📖 manual på svenska för Chief SSM205 (1 sidor) i kategorin Projektor tillbehör. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8802-000100 Rev01

a Duchossois Group Company

05/09

SSB-205, SSM-205, SLB-205 and SLM-205 Interface Brackets

SSB-205, SSM-205, SLB-205 and SLM-205 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific

installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing Interface bracket.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.

2. Turn projector upside down.

3. Place the interface bracket onto the bottom of the projector

4. Align the mounting holes in the interface bracket with the threaded inserts in the bottom of the projector.

5. Using the M4 - 8mm mounting screws with M4 flat washers, secure interface bracket to projector and tighten all fasteners at this time.

NOTE: Security screws can be substituted when mounting interface bracket to projector by using the parts and installation instructions in the

All-Points Security Kit.

(1) Interface Bracket (3) M4 - 8mm Screws

(4) 10 - 24 Thumb Nuts** (3) M4 Flat washers

(1) All-Points Security Kit

**Only used when installing SLB/SSB interface brackets.

NOTE: Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in the

encircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style

interface bracket installation.

SLB-205

SLM-205

(Note: SSM-style interface bracket connections

)

(Note: SSB-style interface bracket connections

)

Towards front of

projector

Towards front of

projector

Produktspecifikationer

Varumärke:	Chief
Kategori:	Projektor tillbehör
Modell:	SSM205
Färg på produkten:	Zwart
Vikt:	1820 g
Bredd:	146 mm
Djup:	164 mm
Höjd:	127 mm
LED-indikatorer:	Ja
Material:	Aluminium
USB-anslutning:	Nee
Antal fans:	1 ventilator(en)
Bostadstyp:	Rack (6U)
Lagringsenheter installerade:	Nee
Installerad lagringsenhet:	Nee
Total installerad lagringskapacitet:	0 TB
Maximal lagringskapacitet som stöds:	- TB
Gränssnitt för lagringsdisk:	SATA
Storlek på lagringsdisk:	2.5 "
HDD storlek:	2.5 "
Gränssnitt för lagringsenheter som stöds:	SAS, Serial ATA
Överföringshastighet:	6 Gbit/s
Antal lagringsenheter som stöds:	12
Typ produkt:	HDD-/SSD-behuizing
Nyckelfack:	Ja
Hot-swap:	Ja
Hot-swap enhetsfack:	Ja
Ventilator diameter:	80 mm
Typer av lagringsenheter som stöds:	HDD & SSD
Fläkthastigheter:	3000 RPM
Stöd för lagringsenhetshöjder:	7, 9.5, 12.5 mm
SATA-värdport:	Ja