Chief VCM93C Bruksanvisning
Chief
Platt panelstöd
VCM93C
Läs nedan 📖 manual på svenska för Chief VCM93C (2 sidor) i kategorin Platt panelstöd. Denna guide var användbar för 14 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/2
I N S T A L L A T I O N I N S T R U C T I O N S
Chief Manufacturing, a products division of
Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918
8809-000020 Rev A
©2008 Milestone AV Technologies, a
Duchossois Group Company
11/08
VCM
VIDEO CEILING MOUNT
Prior to assembly, unpack carton completely and verify contents.
If you are missing any components, please contact Customer Service at 1-800/582-6480
The Deluxe Video Ceiling Mounts are designed to provide fast, simple and secure ceiling installation of video
projectors. Special roll, pitch and horizontal adjustments simplify projection positioning for image alignment.
The ceiling mount also has positive registration lock so the projector may be removed without losing projector
mount registration.
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
IMPROPER INSTALLATION CAN RESULT IN SERIOUS
PERSONAL INJURY! MAKE SURE THAT THE CEILING
STRUCTURAL MEMBERS CAN SUPPORT A REDUNDANT
WEIGHT FACTOR FIVE TIMES THE TOTAL WEIGHT OF THE
EQUIPMENT. IF THE CEILING CANNOT SUPPORT THIS
WEIGHT, REINFORCE THE CEILING BEFORE INSTALLING THE
MOUNT.
THE MAXIMUM WEIGHT TO BE INSTALLED ON THE MOUNT
IS 250 POUNDS (113.4 KG).
INSTALLING THE CEILING MOUNT REQUIRES THE PRESENCE OF TWO
PERSONS FAMILIAR WITH MECHANICAL INSTALLATIONS. A THIRD
ASSISTANT IS RECOMMENDED.
1. Secure the VCM housing to your method of support and tighten firmly so the VCM is housing is
parallel to the screen.
2. Attach the HB-Hanging Bracket according to the instructions accompanying your HB-Hanging
Bracket. The model of your projector determines which HB-Hanging Bracket is included with your
VCM.
3. Using two people lift the projector and install it to the studs extending from the mounting
plate (see Figure 1, item 1). Be sure the HB-Hanging Bracket (2) is seated in the slots.
4. Using a wrench, tighten four 5/16” flange nuts securing slide bracket (6).
WARNING!
5. Tighten securely using the 5/16-18 flange nuts (3).
Align projector as follows:
MOUNTING HARDWARE IS TO BE LOOSENED ONLY TO
ALLOW FOR NECESSARY MOVEMENT. OVER-LOOSENING OR
REMOVAL OF MOUNTING HARDWARE MAY RESULT IN
SERIOUS DAMAGE TO EQUIPMENT OR PERSONAL INJURY.
Vertical Elevation (pitch): Adjust by loosening the three bolts (5) located on the mounting plate (1).
Loosen both sides, tilt projector to desired direction, and securely tighten
three bolts.
Horizontal Tilt (roll): Adjust by loosening the three bolts (5) located on the mounting plate (1)
and turning the adjustment bolt (4). Adjustment may be performed on
both sides of the unit and securely tighten three bolts.
Positive Registration Lock: Tighten the pitch bolts loosen four flange nuts (3) securing the projector
and remove the projector, with the HB-Hanging Bracket attached, from
the VCM.
Horizontal Adjustments: Loosen, but do not remove, the nuts holding the top slide bracket (6).
Adjust unit up to 1 ½” in any direction and tighten the nuts holding the top
slide bracket.
Figure 1
WARNING!
Produktspecifikationer
| Varumärke: | Chief |
| Kategori: | Platt panelstöd |
| Modell: | VCM93C |
Behöver du hjälp?
Om du behöver hjälp med Chief VCM93C ställ en fråga nedan och andra användare kommer att svara dig
Platt panelstöd Chief Manualer
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
Platt panelstöd Manualer
- Platt panelstöd Samsung
- Platt panelstöd HP
- Platt panelstöd Pioneer
- Platt panelstöd Abus
- Platt panelstöd Acco
- Platt panelstöd Akai
- Platt panelstöd Icy Box
- Platt panelstöd Hitachi
- Platt panelstöd Gembird
- Platt panelstöd SilverStone
- Platt panelstöd LC-Power
- Platt panelstöd GPX
- Platt panelstöd Blaupunkt
- Platt panelstöd Manhattan
- Platt panelstöd Tripp Lite
- Platt panelstöd Vision
- Platt panelstöd Kensington
- Platt panelstöd Nabo
- Platt panelstöd Nec
- Platt panelstöd Techly
- Platt panelstöd BlueBuilt
- Platt panelstöd Da-Lite
- Platt panelstöd Luxor
- Platt panelstöd Steren
- Platt panelstöd Iiyama
- Platt panelstöd Barkan
- Platt panelstöd Digitus
- Platt panelstöd Insignia
- Platt panelstöd Sanus
- Platt panelstöd Peerless-AV
- Platt panelstöd Vogels
- Platt panelstöd Fellowes
- Platt panelstöd Dell
- Platt panelstöd Planar
- Platt panelstöd Sven
- Platt panelstöd Konig
- Platt panelstöd One For All
- Platt panelstöd Ematic
- Platt panelstöd Newstar
- Platt panelstöd Ewent
- Platt panelstöd HQ
- Platt panelstöd BakkerElkhuizen
- Platt panelstöd Ultimate
- Platt panelstöd Wentronic
- Platt panelstöd Peerless
- Platt panelstöd Proaim
- Platt panelstöd Monoprice
- Platt panelstöd Ergotron
- Platt panelstöd Gabor
- Platt panelstöd Konig & Meyer
- Platt panelstöd Premier
- Platt panelstöd Atdec
- Platt panelstöd StarTech.com
- Platt panelstöd SIIG
- Platt panelstöd Bell'O
- Platt panelstöd B-tech
- Platt panelstöd Speaka
- Platt panelstöd Crimson
- Platt panelstöd Kogan
- Platt panelstöd Panduit
- Platt panelstöd Schwaiger
- Platt panelstöd Premier Mounts
- Platt panelstöd Cabstone
- Platt panelstöd Elite Screens
- Platt panelstöd Kanto
- Platt panelstöd V7
- Platt panelstöd Kondator
- Platt panelstöd Bretford
- Platt panelstöd SmartMetals
- Platt panelstöd Unicol
- Platt panelstöd Anthro
- Platt panelstöd Alogic
- Platt panelstöd Equip
- Platt panelstöd Zaor
- Platt panelstöd Dataflex
- Platt panelstöd Multibrackets
- Platt panelstöd AMX
- Platt panelstöd Rocstor
- Platt panelstöd CTA Digital
- Platt panelstöd Amer
- Platt panelstöd SunBriteTV
- Platt panelstöd Avteq
- Platt panelstöd Walker Edison
- Platt panelstöd My Wall
- Platt panelstöd Mount-It!
- Platt panelstöd LTN Technologies
- Platt panelstöd Heckler
- Platt panelstöd Helder
- Platt panelstöd NeoMounts
Nyaste Platt panelstöd Manualer
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025