Cisco Aironet 1800S Bruksanvisning

Cisco Åtkomstpunkt Aironet 1800S

Läs nedan 📖 manual på svenska för Cisco Aironet 1800S (54 sidor) i kategorin Åtkomstpunkt. Denna guide var användbar för 52 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/54
G ETTING S GTARTED UIDE
Cisco Aironet 1800s Active Sensor
First Published: February 12, 2018
Last Updated: July 23, 2018
2
1About this Guide
2About the Network Sensor
3Safety Instructions
4Unpacking the 1800s Network Sensor
5Ports and Connectors on the 1800s
6Installation Overview
7Mounting and Powering the Network Sensor
8Configuring the Network Sensor for Wireless Service Assurance
10 Provisioning the Network Sensor via Cisco PnP
11 Upgrading the Network Sensor Software via Cisco DNA Center
12 Troubleshooting and Resetting the Network Sensor
13 Related Documentation
14 Declarations of Conformity and Regulatory Information
15 Obtain Documentation and Submit a Service Request
3
1 About this Guide
This guide provides instructions on how to install and configure your Cisco Aironet 1800s Active
Sensor. This guide also provides mounting instructions and limited troubleshooting procedures.
The Cisco Aironet 1800s Active Sensor is referred to as the network sensor, or sensor in this document.
2 About the Network Sensor
The wireless Cisco Aironet 1800s Active Sensor is
a part of Cisco's Wire
less Service Assurance
solution. The Wireless Service Assurance platform has three components, namely, Wireless
Performance Analytics, Real-time Client Troubleshooting, and Proactive Health Assessment.
The Cisco Aironet 1800s Active Sensor is an 802.11 a/b/g/n/ac (Wave 2) sensor, with internal antennas
and an Ethernet backhaul. The network sensor can be mounted, in a vertical orientation, on a wall or
a desk and supports 2x2:2 SS MU-MIMO applications. The sensor is capable of joining an
infrastructure access point as a client. The sensor can be used to monitor, measure, and troubleshoot
overall wireless network performance.
The 1800s wireless network sensor is available as a base unit with the following power modules which
can be plugged into the base unit:
USB adapter module (AIR-MOD-USB-xx)
AC adapter module (AIR-MOD-AC)
PoE/Ethernet module (AIR-MOD-POE)
Network Sensor Model Numbers and Regulatory Domains
The Cisco Aironet 1800s Active Sensor model has the model number format AIR-AP1800S-x-K9,
where the x placeholder represents the regulatory domain. The ‘x can be any one of the supported
regulatory domains as listed at:
http://www.cisco.com/go/aironet/compliance

Produktspecifikationer

Varumärke: Cisco
Kategori: Åtkomstpunkt
Modell: Aironet 1800S

Behöver du hjälp?

Om du behöver hjälp med Cisco Aironet 1800S ställ en fråga nedan och andra användare kommer att svara dig




Åtkomstpunkt Cisco Manualer

Åtkomstpunkt Manualer

Nyaste Åtkomstpunkt Manualer