COLBOR CL220 Bruksanvisning

Läs nedan 📖 manual på svenska för COLBOR CL220 (16 sidor) i kategorin Lättnad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/16
Thank you for choosing COLBOR product. Please read this manual
carefully before use and follow all instructions mentioned herein.
Video Light User Manual
CL220
Caring For Your COLBOR Product
Power Connection
You must use the power adapter that comes with the product rather than
other adapters to avoid damaging the lamp. The positive and negative
connections of the power adapter interface( DC OUT) and the lamp power
interface (DCIN) are shown below:
+ -- +
N N
Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage.
The product is not waterproof.
Do not leave the product unattended while in use. Keep out of reach of
children.
Do not handle with wet hands. Do not touch the hot COB surface.
Please do not block the ventilation and do not look at the light directly when
it is on.
Do not attempt to disassemble or modify the product. Doing so voids
warranty.
Please have the product checked or repaired by authorized technicians if
any malfunctions happened.
Disconnect from the power supply when it is not in use.
Do not cover, inverted COB and radiator for high temperature, do not cover,
inverted, do not touch the lamp holder and radiator vent with your hands
when the product in use.
Do not use any power adapter of other products to avoid the lamp
malfunction.
Malfunction may be caused by dropping, impact of external force.
Failure to follow all the instructions may result in mechanics damage.
Our company reserves the right of nal interpretation of the product.
Product design and specications are subject to change without prior
notice.
Product Instructions
① LED Display Screen
② EFF Mode Button
③ EFF Rate Option Button
④ Color Temperature Option Button
⑤ Setting Button
⑥ Color Temperature Control Knob
⑦ Brightness Control Knob
⑧ DC 48V Power Port
⑨ Power Button
⑩ Bowens Mount
⑪ COB Lamp Beads
⑫ Lamp Angle Adjustment Locking Grip
⑬ Bracket
⑭ Air Outlet
⑮ NATO Slideway
⑯ Air Inlet
⑰ Lamp Grip
⑱ Soft Light Cover Hole
⑲ Soft Light Cover Hole Screws
⑳ Bracket Screw
Light Installation
Hold the COB cover with the Bowens Mount
tenon and rotate it as the direction of the arrow.
Note: Be sure to remove COB protective cover
and COB protective lm before use.
Installation of reector: Align the reector with the groove around the lamp
head and clip it in, turn the reector as the direction of the arrow, and the
reector installation will be completed after the top rod rebounds.
Removal of reector: Under the instructions of “Lamp Cap Protection Cover
Removal".
1. Removal of lamp cap protection cover
2. Installation and removal of reector

Produktspecifikationer

Varumärke: COLBOR
Kategori: Lättnad
Modell: CL220

Behöver du hjälp?

Om du behöver hjälp med COLBOR CL220 ställ en fråga nedan och andra användare kommer att svara dig




Lättnad COLBOR Manualer

COLBOR

COLBOR CL60 Bruksanvisning

22 September 2024
COLBOR

COLBOR CL100X Bruksanvisning

22 September 2024
COLBOR

COLBOR W60R Bruksanvisning

22 September 2024
COLBOR

COLBOR W100 Bruksanvisning

22 September 2024
COLBOR

COLBOR W60 Bruksanvisning

22 September 2024
COLBOR

COLBOR CL220M Bruksanvisning

20 September 2024
COLBOR

COLBOR CL220R Bruksanvisning

20 September 2024
COLBOR

COLBOR CL330 Bruksanvisning

20 September 2024
COLBOR

COLBOR CL220 Bruksanvisning

20 September 2024

Lättnad Manualer

Nyaste Lättnad Manualer