Conceptronic EMRICK04B Bruksanvisning

Läs nedan 📖 manual på svenska för Conceptronic EMRICK04B (8 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
Multi Language Quick Guide
2- -1 M.2 SSD PCIe Adapterin
EMRICK0 4B
V1.0
English
Conceptronic EMRICK0 4B
Installation & usage
This 2-in-1 M.2 SSD PCIe Adapter is a multi-functional NVMe
conversion card, which can support the PCIe protocol NVMe SSD to
connect directly to the motherboard, or the SATA Protocol NVMe SSD to
connect to the motherboard SATA port with a SATA cable.
Installed the M.2 M Key SSD and M.2 B Key SSD into the PCIe
Adapter.
Turn O the power to your computer.
Unplug the power cord and remove your computer’s cover.
Remove the slot bracket from an available PCIe slot.
To install the card, carefully align the card’s bus connector with the
selected PCIe slot on the motherboard. Push the board down rmly.
Used the SATA cable connect NVMe adapter to the motherboard
SATA port.
Replace the slot bracket’s holding screw to secure the card.
Replace the computer cover and reconnect the power co rd.
Deutsch
Conceptronic EMRICK0 4B
Installation Verwendung &
Dieser 2- -1-M.2- -PCIe-Adapter ist eine multifunktionale NVMe-in SSD
Wandlerkarte, die NVMe-SSDs mit PCIe-Protokoll zur direkten
Verbindung mit dem Motherboard oder VNMe-SSDs zur Verbindung mit
dem SATA-Anschluss des Motherboards über ein SATA-Kabel
unterstützt.
M.2-M-Key-SSD und M.2-B-Key-SSD im PCIe-Adapter installiert.
Unterbrechen Sie die Stromversorgung Ihres Computers vollständig.
Trennen Sie das Netzkabel und entfernen Sie die Abdeckung Ihres
Computers.
Entfernen Sie das Slotblech eines freien PCIe-Steckplatzes.
Zur Installation setzen Sie die Karte mit den Kontakten exakt auf den
gewünschten PCIe-Steckplatz auf dem Motherboard auf. Drücken Sie
die Karte fest nach unten.
Verbinden Sie den NVMe-Adapter per SATA-Kabel mit dem SATA-
Anschluss des Motherboards.
Fixieren Sie die Karte mit einer Schraube an der Gehäuseckwand.
Setzen Sie die Abdeckung des Computers wieder auf und schließen
Sie das Netzkabelwieder an.

Produktspecifikationer

Varumärke: Conceptronic
Kategori: Inte kategoriserad
Modell: EMRICK04B

Behöver du hjälp?

Om du behöver hjälp med Conceptronic EMRICK04B ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Conceptronic Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer