Corberó CCV 3HL 60 Bruksanvisning

Corberó Ugn CCV 3HL 60

Läs nedan 📖 manual på svenska för Corberó CCV 3HL 60 (21 sidor) i kategorin Ugn. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/21
Instruction Manual
Model: CCV3HL60
Á
Modelo: CCV3HL60
PLACA VITROCERAMICA
Manual de Instrucciones
Product Introduction
Working Principle
1
The microcomputer ceramic hob directly employs
resistance wire heating, and realizes power regulation with the microcomputer
controlling different heating time and closing time of the resistance wire.
High temperature protection
The temperature sensor mounted on the radiant electric the temperature
inside the cooker from time to time. When an excessive temperature is
detected, the cooking plate will be directly disconnected and stop power
output.
Safety
Dear customer,
Thank you for purchasing the our ceramic hob.
Our product can serve you many years to your satisfaction.
Please read this instructions manual carefully before using and installation.
Keep it in a good place after reading for future reference.
Thank you again for your purchase of our ceramic hob, and wish
you to enjoy the pleasure brought about by it.
The ramic hob can meet dif ferent
kinds of cuisine demands because of resistance wire heating, micro-
computerized control and multi-power selection, really the optimal choice
for modern families.
The ceramic hob centers on customers and adopts personalized
design. The hob has safe and reliable performances, making your life
comfortable and enabling to fully enjoy the pleasure from life.
microcomputer ce
CCV3HL60
C C V3H L60
2
Safety
2
3
Residual heat indicators
After using the hob, waste heat remains in the heating area. The
power nixie tube shows the code “H”, warning to be away from the
heating area.
Auto shut down protection
During the hob working, it is shut off automatically when the default
timing reach by the program if without operating. If several heating
zones work simultaneously, the hob will be automatically shut off when
anyone heating area reaches it’s default timer. The default working
timer for various power levels are shown in the table below:
Installation
Selection of installation equipment
Drill holes on the table surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 50 mm space shall
be preserved around the hole.
Be sure the thickness of the table surface is at least 30mm. Please select
heat-resistant table material to avoid larger deformation caused by the heat
radiation from the hotplate.
As shown in Figure (1)
1
Power level 1 2 3 4 5 6 7 8 9
Default working
time(hour) 8 8 8 4 4 4 2 2 2
56cm
49cm

Produktspecifikationer

Varumärke: Corberó
Kategori: Ugn
Modell: CCV 3HL 60

Behöver du hjälp?

Om du behöver hjälp med Corberó CCV 3HL 60 ställ en fråga nedan och andra användare kommer att svara dig




Ugn Corberó Manualer

Ugn Manualer

Nyaste Ugn Manualer