Corsair Commander Mini Bruksanvisning

Corsair Inte kategoriserad Commander Mini

Läs nedan 📖 manual på svenska för Corsair Commander Mini (3 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/3
corsair.com/link
Introduction
The Corsair Commander Mini replaces manual
controls for fans and lighting with an software
interface, while simultaneously oering more
advanced control and expansion options than
motherboard BIOS settings. The Corsair Commander
Mini can be used as the hub of your Corsair Link
system allowing connections from other Corsair Link
enabled hardware. This guide will help you install
your Corsair Commander Mini.
Specications
Package Contents
1 x Corsair Commander Mini unit
1 x Corsair Link Digital connection cable
3 x Fan extension cables
4 x Thermistor cables
1 x Mounting Tape
Cable Dimensions
Permanently attached cables
1. USB cable (24")
2. SATA power cable (18")
Expansion cables
1. Corsair Link Digital cable (18")
2. Fan extension cables (12")
3. Thermistor cables (24")
Electrical Specications
Commander Mini Quick Start Guide
Electrical Specifications
Power Supply Voltage Input 11.4 - 12.6 volts
1 amp
2 amps
4 amps
Maximum Power
per fan header
Maximum power for
RGB LED channel
Maximum power for all 6 fan
headers and RGB LED channel
58.9
mm
13.5
mm
145 mm
Unit Dimensions
A
B
C D
A
B
C
D
corsair.com/link
Installation Instructions
1. Power o your system for the installation of the
Corsair Commander Mini.
2. The Corsair Commander Mini can be mounted in many
empty locations inside your case for ease of cable
routing. Its slim design allows for installation on the
rear of the motherboard tray in most cases. Its width
also allows for internal mounting in the optical disk
drive cage of most cases. We recommend making all
of the required connections first, and then attaching
the Commander Mini to your PC case. Use the
provided mounting tape to secure the Commander
Mini unit to your PC case.
3. Connect the attached USB cable to any available
internal USB 2.0 header on your PC’s motherboard
(Refer to your motherboards manual for location).
Take care when connecting the USB cable, as it is
keyed to prevent incorrect installation.
4. Connect the attached SATA power connector to any
available SATA connector from your power supply.
5. The Corsair Commander Mini has 4 Corsair Link
Digital ports that are for connecting to other Corsair
Link Digital hardware. Use the provided Corsair Link
Digital cable to connect to an H80i or H100i. To
connect to a Corsair PSU with Corsair Link Digital
capabilities (I Series) use the cable supplied with the
power supply to connect to the ports on the
Commander Mini.
6. Connect the thermal sensors to the two-pin
headers labeled “Temp 1-4” on the Commander Mini.
Tips for connecting thermal sensors
The thermal sensors are designed to measure ambient
temperatures, so for the most accurate results, they
should not directly touch components. You may find it
useful to mount the thermal sensors near air intake and
exhaust points, and if your PC case has multiple
compartments, you can try placing each of the sensors
in its own compartment. Since the thermal sensors can
easily repositioned, you can try various locations and
use what works best for you.
7. Connect any fans you wish to control to the four
pin headers labeled “Fans 1-6”. The included fan
extension cables can be used if necessary.
8. Connect the RGB LED strips (sold separately) to the
connectors labeled “LED 1”.
9. Hardware installation is complete.
10. Download the Corsair Link Dashboard software
11. The software can be downloaded from the following
location: www.corsair.com/linksw
12. Install the Corsair Link Software
The LED on the Corsair Commander Mini shows activity and
status. Green indicates USB connectivity with the host PC.
Amber (intermittent) indicates USB activity. Red indicates
USB connectivity error.
[Optional]
a
a
b
c
d
bc
d
46221 Landing Parkway Fremont California 94538 • USA
© 2014 Corsair Components, Inc. All rights reserved. Corsair and the sails logo are registered trademarks, and Corsair Link is a trademark in the United States and/or other countries.
All other trademarks are the property of their respective owners. Product may vary slightly from those pictured. Document Number: 49-001294 revAA
FORUM: forum.corsair.com
TWITTER: twitter.com/corsairmemory
CORSAIR LINK PAGE: corsair.com/link
EMAIL: support@corsair.com
FACEBOOK: facebook.com/corsairmemory
BLOG: blog.corsair.com
USA and CANADA: (800) 205-7657 | INTERNATIONAL: (510) 657-8747 | FAX: (510) 657-8748
corsair.com

Produktspecifikationer

Varumärke: Corsair
Kategori: Inte kategoriserad
Modell: Commander Mini

Behöver du hjälp?

Om du behöver hjälp med Corsair Commander Mini ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Corsair Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer