Creality CR20 Pro Bruksanvisning
Creality
3D-skrivare
CR20 Pro
Läs nedan 📖 manual på svenska för Creality CR20 Pro (16 sidor) i kategorin 3D-skrivare. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/16
CR20 Pro 3D Printer Guide Bo
This guide book is for standard CR20 Pro.
Please plug the power cord into a three-hole power jack.
Detailed instructions for use are available on the TF card.
NOTES
1. Do not use the printer any way other than described herein in order to avoid
personal injury or property damage.
2. Do not place the printer near any heat source or flammable or explosive
objects. We suggest placing it in a well-ventilated, low-dust environment.
3. Do not expose the printer to violent vibration or any unstable environment, as
this may cause poor print quality.
4. Before using experimental or exotic filaments, we suggest using standard
filaments such as ABS or PLA to calibrate and test the machine.
5. Do not use any other power cable except the one supplied. Always use a
grounded three-prong power outlet.
6. Do not touch the nozzle or printing surface during operation as they may be
hot. Keep hands away from machine while in use to avoid burns or personal
injury.
7. Do not wear gloves or loose clothing when operating the printer. Such cloths
may become tangled in the printers moving parts leading to burns, possible
bodily injury, or printer damage.
8. When cleaning debris from the printer hotend, always use the provided tools.
Do not touch the nozzle directly when heated. This can cause personal injury.
9. Clean the printer frequently. Always turn the power off when cleaning, and
wipe with a dry cloth to remove dust, adhered printing plastics or any other
material off the frame, guide rails, or wheels . Use glass cleaner or
isopropyl alcohol to clean the print surface before every print for consistent
results.
10. Children under 10 years of age should not use the printer without supervision.
CONTENTS
Dear consumers,
Thank you for choosing our products. For the best experience,
please read the instructions before operating the Printer. Our 3D
team will always be ready to give you the best service. Please
contact us via the phone number or e-mail address provided at the
end when you encounter any problem with the Printer.
For a better experience in using our product, you may learn how to
use the Printer in the following ways:
View the accompanied instructions and videos on the TF card.
Visit our official website at www.creality3d.cn You will find
relevant softw are/ha rdware infor mation , cont act de tails and
operation and maintenance instructions on the website.
Produktspecifikationer
| Varumärke: | Creality |
| Kategori: | 3D-skrivare |
| Modell: | CR20 Pro |
Behöver du hjälp?
Om du behöver hjälp med Creality CR20 Pro ställ en fråga nedan och andra användare kommer att svara dig
3D-skrivare Creality Manualer
19 September 2024
19 September 2024
19 September 2024
19 September 2024
19 September 2024
3D-skrivare Manualer
- 3D-skrivare Anker
- 3D-skrivare Renkforce
- 3D-skrivare Kodak
- 3D-skrivare Velleman
- 3D-skrivare BQ
- 3D-skrivare Monoprice
- 3D-skrivare Flashforge
- 3D-skrivare XYZprinting
- 3D-skrivare MakerBot
- 3D-skrivare Weistek
- 3D-skrivare Anycubic
- 3D-skrivare German RepRap
- 3D-skrivare Wanhao
- 3D-skrivare Easy Threed
- 3D-skrivare LulzBot
- 3D-skrivare SINDOH
- 3D-skrivare PP3DP
- 3D-skrivare Wasp
- 3D-skrivare 3D Systems
- 3D-skrivare Raise3D
- 3D-skrivare Craftbot
Nyaste 3D-skrivare Manualer
27 September 2024
25 September 2024
25 September 2024
23 September 2024
23 September 2024
23 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024