Crestron B10-BTN Bruksanvisning

Läs nedan 📖 manual på svenska för Crestron B10-BTN (4 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
Crestron B10-BTN
Button Caps for the HTT-B10X
Installation Guide
Crestron B10-BTN Button Caps for the HTT-B10X
Button Caps for the HTT-B10X:
B10-BTN
Introduction
The Crestron® B10-BTN is available in four different models. For
simplicity within this guide, B10-BTN is used except where noted.
Models
MODEL NUMBER DESCRIPTION
B10-BTNB-T 5 BLANK Blank Buttons, Black
B10-BTNB-T 5 ENGRAVED Engraved Buttons, Black
B10-BTNW-T 5 BLANK Blank Buttons, White
B10-BTNW-T 5 ENGRAVED Engraved Buttons, White
Button Installation
The HTT-B10X is shipped with 10 blank buttons (two columns of five
buttons each). To replace one or both button columns, follow this
procedure:
1. Disconnect the 12 Volt power pack (if connected) and remove the
batteries.
2. Remove the four Phillips screws from the four corners on the
bottom of the unit.
3. Remove the cover from the front of the unit.
4. Remove the old button column(s) and replace with the new one(s),
making sure the column is seated in the two small holes on the
side. No screws are required.
Installation Guide – DOC. 6641A Button Caps for the HTT-B10X: B10-BTN
1
Button Caps for the HTT-B10X Crestron B10-BTN
5. Replace the cover on the front of the unit.
6. Replace the four Phillips screws on the bottom of the unit.
7. Reinstall batteries and reconnect 12 Volt power pack.
HTT-B10X Button Installation
2
Button Caps for the HTT-B10X: B10-BTN Installation Guide – DOC. 6641A

Produktspecifikationer

Varumärke: Crestron
Kategori: Inte kategoriserad
Modell: B10-BTN

Behöver du hjälp?

Om du behöver hjälp med Crestron B10-BTN ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Crestron Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer