Crestron ESSENCE IC6-W-T Bruksanvisning

Crestron högtalare ESSENCE IC6-W-T

Läs nedan 📖 manual på svenska för Crestron ESSENCE IC6-W-T (2 sidor) i kategorin högtalare. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

Essence® 2-Way In-Ceiling Speakers

quickstart guide

www.crestron.com

Specifications subject to

change without notice.

The product of expert Crestron® audio engineering,

Essence® speakers deliver the pinnacle of performance

for demanding residential installations. Select esoteric

materials, top shelf components, and a refined, high end

appearance underscore the meticulous design behind

each model. The result is a complete line of in-wall and

in-ceiling speakers worthy of a place in every room of the

finest custom home.

The Essence line promises the ultimate in installed audio

design, delivering simply stunning sound quality while

minimizing any impact on your décor, thanks to paintable

zero-bezel grilles.

ESSENCE IC5/ESSENCE IC6/ESSENCE IC8

Mount/Remove Speakers

The in-ceiling speakers include three toggle clamps that simplify the mounting process. If the

grilles are mounted on the speakers, remove them before proceeding. (Refer to “Install/Re-

move Grilles” below.)

1. Connect the speaker cable wires to the spring terminals by pressing the top of the

terminals down and inserting the exposed strands into the hole. Make sure that the

+ + – – wires go to the (red coded) terminals, and the wires go to the (black coded)

terminals.

2. With the toggle clamps turned inward, insert the speaker into the opening. As the three

screws on the front of the speaker are tightened, the toggle clamps first rotate into

clamping position (refer to the figure to the right) and then begin holding the speaker to

the ceiling. Tighten the screws until the speaker is secured; do not overtighten.

3. Speaker removal is accomplished by reversing the procedures given in steps 1 and 2

above.

a. Loosen the front screws to unclamp the speaker. Continue to loosen the screws until

the toggle clamps rotate inward.

b. When the speaker is loose, carefully remove it from the opening.

c. Disconnect the wires from the terminals.

Install/Remove Grilles

The zero-bezel frameless grilles are held in place by powerful magnets. To remove the

grilles, grip the edges and pull away from the speaker.

Paint the Speaker Grilles

Speaker grille painting should be done prior to mounting.

1. Carefully remove the material on the underside of the grille and set it aside for

reinstallation. It may be necessary to use a knife or other sharp instrument to free an

edge of the material so it can be peeled away. Use care to avoid cutting or tearing the

material.

2. Dry brush or lightly spray the surface to be painted. Use care to avoid clogging the

holes in the grille.

3. Once the paint is dry, reinstall the material to the underside.

1Installation

QUICKSTART DOC. 7393D (2034593) 02.18

Rear View (Typical)

Toggle

Clamps (3)

Front View (Typical)

Tighten Screws

Install Cables

Run the cables from the audio source to each speaker location following all appropriate

local codes. Strip the ends of the speaker cables 1/4” to 1/2” (6 mm to 12 mm) and twist

the exposed strands.

90°

Prepare Mounting Holes

Before finalizing the speaker location, check to make sure there are no fixtures, pipes, air

ducts, joists, or other possible obstructions. Use a good quality stud finder to locate joists.

If there is no access to the area above the ceiling, and it is uncertain that there are no

obstructions, carefully drill a small hole just through the ceiling near the middle of the proposed

speaker location(s) and use one of the commercially available inspection devices designed for

this purpose, or do one of the following:

● Use a piece of stiff wire, bent into an “L” shape, with one end long enough to explore an

area equal to the size of the speaker with the toggle clamps extended. Insert the wire into

the hole, make sure it rotates freely in a complete circle and that there is sufficient depth,

● Use a drywall saw to cut a small hole at a 45° angle toward the inside of the hole. An angle

cut simplifies repair since the removed piece can be reinserted to help plug the hole.

If there are no obstructions, use the supplied template to trace outlines of the mounting holes

on the ceiling. Cut the final mounting holes at a 90° angle to the ceiling.

45°

Spring

Terminals (2)

Essence® 2-Way In-Ceiling Speakers

quickstart guide

ESSENCE IC5/ESSENCE IC6/ESSENCE IC8

www.crestron.com

Specifications subject to

change without notice.

ESSENCE IC5/ESSENCE IC6/ESSENCE IC8

Specifications

QUICKSTART DOC. 7393D (2034593) 02.18

Features & Performance

Woofer1

Tweeter2

Crossovers

Crossover Frequency

Impedance

Frequency Response

Frequency Range

Power Handling

Sensitivity

Environmental

Temperature

Humidity

Dimensions3

Diameter

Depth

Minimum Mounting Depth

Recommended Cutout

Diameter

ESSENCE IC5/IC6/IC8 Specifications

Construction

Baffle

Grille

Mounting

ESSENCE IC5

8.30 in (211 mm)

4.07 in (104 mm)

3.88 in (99 mm)

7.40 in (188 mm)

ABS plastic, black

Steel with textured finish, paintable, round , magnetically held zero bezel frameless

Flush ceiling mount using three integral spring-loaded toggle clamps, 1.35 in (34 mm)

maximum surface thickness

41° to 104° F (5° to 40° C)

10% to 90% RH (non-condensing)

For indoor use only

Connections

Input

Maximum Wire Size

(2) spring terminals

10 AWG

ESSENCE IC6 ESSENCE IC8

5.25 in (134 mm)

1.10 in (28 mm)

4th order Linkwitz-Riley

2 kHz

8 Ω nominal

55 Hz to 20 kHz (±3 dB)

45 Hz to 20 kHz (-10 dB)

125 watts program

88.5 dB @ (W/m)

1. Woven Kevlar

® with rubber surround, vented pole piece and cast aluminum basket

2. Advanced synthetic polymer dome, ferrofluid cooling, offset post mounted

3. Per speaker

6.50 in (165 mm)

1.10 in (28 mm)

4th order Linkwitz-Riley

2 kHz

8 Ω nominal

45 Hz to 20 kHz (±3 dB)

35 Hz to 20 kHz (-10 dB)

150 watts program

89.5 dB @ (W/m)

8.00 in (203 mm)

1.10 in (28 mm)

4th order Linkwitz-Riley

2 kHz

8 Ω nominal

38 Hz to 20 kHz (±3 dB)

30 Hz to 20 kHz (-10 dB)

175 watts program

91.5 dB @ (W/m)

Weight34.58 lb (2.1 kg)

Available Models

Available Accessories

Essence 5.25” 2-Way

In-Ceiling Speakers, Pair,

White Textured

ESSENCE IC5-W-T

SPKA-NCTP-IC500

New-Construction

Speaker Templates

9.28 in (236 mm)

4.27 in (109 mm)

4.08 in (104 mm)

8.40 in (214 mm)

4.85 lb (2.2 kg)

Essence 6.5” 2-Way

In-Ceiling Speaker, Pair,

White Textured

ESSENCE IC6-W-T

SPKA-NCTP-IC600

New-Construction

Speaker Templates

11.64 in (296 mm)

4.94 in (126 mm)

4.75 in (121 mm)

10.80 in (275 mm)

7.09 lb (3.3 kg)

Essence 8” 2-Way

In-Ceiling Speaker, Pair,

White Textured

ESSENCE IC8-W-T

SPKA-NCTP-IC800

New-Construction

Speaker Templates

SPECIFICATION

Side and Rear Views (Typical)

Depth

Minimum

Mounting

Depth

Diameter

Recommended

Cutout

Diameter

TROUBLE

POSSIBLE CAUSE(S)

CORRECTIVE ACTION

No sound or

intermittent

sound from

speakers.

Cable connection error.

Verify cable connections between

amplifier and speakers.

Amplifier not receiving

input signal or amplifier

malfunction.

Verify amplifier is functioning correctly,

that it is receiving an input signal and

that correct input source is selected.

Faulty device in system. Verify all devices in system are

functioning properly.

Constant noise

such as buzz,

hum, or hiss

from speakers. System grounding fault. Verify system grounding.

Poor low

frequency

output.

Incorrect polarity

connection at speaker

or amplifier.

Verify speaker connection polarity ( on +

amplifier to on speaker).+

The following table provides corrective action for possible trouble situations.

If further assistance is required, please contact a Crestron customer service

representative.

Further Inquiries

Future Updates

3Problem Solving

Troubleshooting

To locate specific information or resolve questions after reviewing this guide,

contact Crestron's True Blue Support at 1-888-CRESTRON

[1-888-273-7876] or, for assistance within a particular geographic region, refer

to the listing of Crestron worldwide offices at www.crestron.com/offices.

To post a question about Crestron products, log onto Crestron’s Online Help at

www.crestron.com/onlinehelp. First-time users must establish a user account

to fully benefit from all available features.

As Crestron improves functions, adds new features and extends the

capabilities of the ESSENCE IC5/IC6/IC8 speakers, additional information may

be made available as manual updates. These updates are solely electronic and

serve as intermediary supplements prior to the release of a complete technical

documentation revision.

Check the Crestron Web site periodically for manual update avail

ability and its

relevance. Updates are identified as an “Addendum” in the Download column.

The product warranty can be found at .www.crestron.com/legal/sales-terms-conditions-warranties

The specific patents that cover Crestron products are listed at .www.crestron.com/legal/patents

Certain Crestron products contain open source software. For specific information, please visit

www.crestron.com/legal/open-source-software.

Crestron, the Crestron logo and Essence, are either trademarks or registered trademarks of Crestron

Electronics, Inc. in the United States and/or other countries. Kevlar is either a trademark or registered

trademark of E. I. du Pont de Nemours and Company in the United States and/or other countries. Other

trademarks, registered trademarks, and trade names may be used in this document to refer to either the

entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the

marks and names of others. Crestron is not responsible for errors in typography or photography.

This document was written by the Technical Publications department at Crestron.

Produktspecifikationer

Varumärke:	Crestron
Kategori:	högtalare
Modell:	ESSENCE IC6-W-T
Enhetsplacering:	Vrijstaand
Färg på produkten:	Wit
Dörrgångjärn:	Rechts
Vikt:	58000 g
Bredd:	595 mm
Djup:	596 mm
Höjd:	1855 mm
Nettoskatt:	- W
Sladdlängd:	1.8 m
Ljudnivå:	38 dB
Energie-efficiëntieklasse:	F
Årlig-energiförbrukning:	292 kWu
Förpackningens vikt:	64000 g
Förpackningens bredd:	660 mm
Djuppackning:	685 mm
Förpackningshöjd:	1945 mm
Frys nettokapacitet:	104 l
Fryskapacitet:	5 kg/24u
Dörröppningsriktning utbytbar:	Ja
Kylskåpets nettokapacitet:	211 l
Kylskåp invändig belysning:	Ja
Typ av lampa:	LED
Antal hyllor i kylskåp:	3
Antal-grönsakslådor:	1
Frysläge:	Onder
Retentionstid vid strömavbrott:	24 uur
Snabbfrysfunktion:	Ja
Antal fryshyllor:	3
antal stjärnor:	4*
Total nettokapacitet:	315 l
Äggställ:	Ja
Automatisk avfrostning (kylskåp):	Ja
Hyllmaterial:	Glas
Supercool funktion:	Ja
Kylskåpsdörrfickor:	4
Energianvändning per dag:	0.61 kWh/24u
Lägsta drifttemperatur:	16 °C
Maximal temperatur (drift):	38 °C
Klimaatklasse:	N-ST
Bulleremissionsklass:	C
Justerbara fötter:	Ja
AC-ingångsspänning:	220 - 240 V
AC-ingångsfrekvens:	50 Hz
Energieffektivitetsskala:	A tot G
Iskubshållare:	Ja