CRUX CCH-01W Bruksanvisning
CRUX
Backkamera
CCH-01W
Läs nedan 📖 manual på svenska för CRUX CCH-01W (1 sidor) i kategorin Backkamera. Denna guide var användbar för 13 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/1
Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.052318
CCH-01W
JEEP WRANGLER License Plate Mount Camera
2007 - 2017
- Installs on your Wrangler’s license plate bracket, keeping the rugged appeal of your Jeep.
- 120° wide viewing angle.
- 0.4 Lux minimum for night driving.
- Selectable Parking Guide Line ON or OFF.
PRODUCT FEATURES:
PARTS INCLUDED:
INSTALLATION DIAGRAM:
CCH-01W CAMERA EXTENSION CABLE
*NOTE: To power the camera, use RED Wire A or B. If tapping power from the radio or RVC Interface, make sure to
insulate RED Wire A to avoid it from shorng. If you will be tapping power from the reverse light +12V, insulate RED
Wire B to avoid it from shorng. With either connecon the Black GROUND wire needs to be connected to a solid chassis
ground. For vehicles with manual transmission, we recommend tapping +12V power from the reverse light.
WHITE Wire: Connect to show parking guide line. Disconnect to remove. Insulate with tape to avoid from shorng.
R
INTERFACING SOLUTIONS
Sightline
CAMERAS
WHITE Wire
Parking Guideline
Regulator
Extension Coax Cable
GROUND
RED Wire (A)*
RED Wire (B)*
Make sure the arrows
line up and push in
the connectors well.
To Aftermarket Radio
Backup Camera Input
OR
Reverse Camera Interface
Backup Camera Input
LICENSE PLATE
CAMERA
1. Remove the stock license plate light at the back of the vehicle.
2. Install the camera assembly to where the stock license plate light was.
3. Connect the built-in license plate light of the camera to the stock license plate power connecon.
4. Connect the power of the camera to your reverse light wires:
Red wire to +12V
Black wire to Ground
5. Connect the video cable of the camera to the extension cord provided.
6. Run the video extension cable to the back of the radio.
7. Connect the video cable to your in-dash aermarket mulmedia or navigaon receiver’s camera input.
8. Put the gear in reverse to see the image from the camera.
INSTALLATION PROCEDURE:
Produktspecifikationer
| Varumärke: | CRUX |
| Kategori: | Backkamera |
| Modell: | CCH-01W |
Behöver du hjälp?
Om du behöver hjälp med CRUX CCH-01W ställ en fråga nedan och andra användare kommer att svara dig
Backkamera CRUX Manualer
30 December 2025
30 December 2025
30 December 2025
30 December 2025
4 September 2024
4 September 2024
4 September 2024
3 September 2024
3 September 2024
3 September 2024
Backkamera Manualer
- Backkamera AEG
- Backkamera Garmin
- Backkamera Kenwood
- Backkamera Pioneer
- Backkamera Alpine
- Backkamera Pyle
- Backkamera Elro
- Backkamera Maginon
- Backkamera Dometic
- Backkamera Xomax
- Backkamera Marquant
- Backkamera Trebs
- Backkamera Pro-User
- Backkamera Clarion
- Backkamera Audiovox
- Backkamera Valueline
- Backkamera Waeco
- Backkamera Tracer
- Backkamera Dnt
- Backkamera Boyo
- Backkamera Furrion
- Backkamera VDO Dayton
- Backkamera Valeo
- Backkamera Luis
- Backkamera Xzent
- Backkamera Veise
- Backkamera Beeper
- Backkamera Camos
- Backkamera Mobiset
- Backkamera AutoXtreme
Nyaste Backkamera Manualer
21 Februari 2025
31 December 2025
20 December 2024
6 December 2024
26 Oktober 2024
26 September 2024
26 September 2024
26 September 2024
26 September 2024
25 September 2024