CRUX SOOGM-19L Bruksanvisning

CRUX Inte kategoriserad SOOGM-19L

Läs nedan 📖 manual på svenska för CRUX SOOGM-19L (4 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/4
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.071720
1 of 4
RAD IO REP LA CEMENT
SWC RET ENTIO N
+
R
INTERFACING SOLUTIONS
- Retains factory features in select GM LAN V2 (LIN) Bus vehicles while functioning with an aftermarket radio.
- Retains OnStar functionality.
- Retains all chime functions.
- Retains OEM Auxiliary Input.
- Retains Factory Bluetooth in Vehicles 2008-upwards if equipped with the new OnStar device.
- Retains factory Steering Wheel Controls via built-in, preprogrammed interface.
- Retains RAP (Retained Accessory Power).
- Includes factory backup camera connection for the IO3 system. (vehicles with IO4, IO5 & IO6 systems can be hard
wired to retain the OEM camera. See page 3)
PRODUCT FEATURES:
PARTS INCLUDED:
INSTALLATION DIAGRAM:
SOOGM-19L MODULE SOOGM-19L HARNESS SWC CABLE ANTENNA ADAPTER
SOOGM-19L
OnStar Radio Replacement Interface with Steering Wheel
Control Retention for GM LAN v2 (LIN) Bus Vehicles 2014 - 2018
AFTERMARKET
RADIO
Reverse Red/White















TO FACTORY
HARNESS
16-Pin Green
Connector
20-Pin Gray
Connector
4-Pin
Connector
Cap or insulate if
not being used
3.5MM SWC CABLE
Plug in the 3.5MM SWC cable to the 4-pin port
on the module. See “DIP SWITCH SETTINGS” section.
Audio Input
Rear Camera (IO3)
LIN BUS (Green/Black)
Antenna Adapter
(Included)
24-Pin
Connector
8-Pin
Connector
NON
BOSE
10-Pin
Connector SWC DIP SWC
1 2 3 4
ON
Chime Volume
Adjustment
1 2 3
ON VR Activation
for OnStar (set DIP#1 to ON)
JVC/Kenwood (Blue / Yellow)
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.071720
SOOGM-19L
OnStar Radio Replacement Interface with Steering Wheel
Control Retention for GM LAN v2 (LIN) Bus Vehicles 2014 - 2018
2 of 4
RAD IO REP LA CEMENT
SWC RET ENTIO N
+
R
INTERFACING SOLUTIONS
Plug in the 8-pin Molex connector of the SOOGM-19L harness
to the Black, NON BOSE, port of the module.
Non-Bose
Port
The SOOGM-19L has a potenometer to adjust the chime
volume. It is set at half way by default. To adjust the volume,
simply use a suitable screw driver and turn the potenometer
clockwise to increase the volume and counter-clockwise to
decrease the volume.
Chime
Volume
Adjustment
CHIME VOLUME ADJUSTMENT:
ONSTAR VOLUME ADJUSTMENT:
To adjust the OnStar volume, turn on OnStar and adjust the volume using the SWC volume adjustment. There
are 4 steps of volume control. Once it is set, the SOOGM-19L will memorize this level.
AUDIO CONNECTION:
BOSE AMPLIFIER BYPASS:
For vehicles equipped with a factory Bose amplier, extend the speaker wires of the SOOGM-19L harness and
connect to the Bose amplier output wires. Locate the Bose amplier to nd out how much speaker wires is
neccessary. The Bose amplier is located as follows: (NOTE: Bose ampliers are commonly found in the locaons listed
below but the manufacturer can mount it elsewhere. Installer should verify the locaon before installaon.)
Trucks = Center of the rear wall / SUVs = Center console or in the cargo space / Sedans = Rear deck or Trunk area
Pinout for the 8 and 16 pin OEM Bose amplier connectors:
14
8 5
1
8
9
16
Pin # Wire Color Descrip�on
1 Dark Blue / Grey Subwoofer +
2 Yellow Right Front Speaker +
3 Dark Blue Le� Front Speaker +
4 Red / Yellow Constant +12V
5 Grey / Black Subwoofer -
6 Yellow / Black Right Front Speaker -
7 Brown / Dark Blue Le� Front Speaker -
8 Black Ground
Pin # Wire Color Descrip�on
4 Brown / Light Green Right Front Tweeter +
5 Yellow / Dark Blue Tweeter +Le� Front
6 White Right Rear Speaker +
7 Light Green Le� Rear Speaker +
12 Purple / Brown Right Front Tweeter -
13 Yellow / Grey Tweeter - Le� Front
14 Dark Blue / Black Right Rear Speaker -
15 Light Green / Black Le� Rear Speaker -
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.071720
SOOGM-19L
OnStar Radio Replacement Interface with Steering Wheel
Control Retention for GM LAN v2 (LIN) Bus Vehicles 2014 - 2018
3 of 4
RAD IO REP LA CEMENT
SWC RET ENTIO N
+
R
INTERFACING SOLUTIONS
4. Unplug the GREEN and GRAY
connectors from the headunit.
5. Plug the GREEN and GRAY connectors to the
SOOGM-19L T-Harness.
6. Use the supplied antenna adapter to plug
between the OE antenna connector and
aermarket radio antenna port.
7. Remove plasc trim under the
steering wheel column and locate a
GREEN/BLACK wire in the bundle. Tap
the GREEN/BLACK from the SWC Cable.
We recommend soldering the wires
together for a reliable connecon.
8. Use a dash kit (not included) for a clean
install. Test the radio for funconality. Test
the chime and Retained Accessory Power
(RAP) funcons. Reverse the process to
install the new aermarket radio.
The SOOGM-19L is prewired with an RCA connector to retain the OEM camera on vehicles
with a IO3 system. To retain the OEM camera on IO4, IO5 and IO6 systems, you will need
connect an RCA cable to the 12-pin connector on the HMI module found either by the
passenger kick panel or behind the glove box. Connect the RCA as follows:
HMI Connector
PIN 5 = Gray/Yellow to RCA posive
PIN 6 = White/Blue to RCA shield
We recommend soldering and heat shrinking these wires for a secure connecon.
Pin 6 Pin 5
White/Blue Gray/Yellow
OEM CAMERA RETENTION:
INSTALLATION INSTRUCTIONS:
1. Connect the aermarket radio’s
power/speaker harness to the SOOGM-
19L T-Harness using the Installaon
Diagram on page 1. Use good quality
crimp caps or bu splice for a secure
connecon. Solder and heat shrinking
the connecons is highly recommended.
2. Carefully remove the radio trim with a plasc
pry tool and pull outward.
3. Remove the radio bezel by removing the
4 screws on the corners.

Produktspecifikationer

Varumärke: CRUX
Kategori: Inte kategoriserad
Modell: SOOGM-19L

Behöver du hjälp?

Om du behöver hjälp med CRUX SOOGM-19L ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad CRUX Manualer

CRUX

CRUX SOOGM-16 Bruksanvisning

26 September 2024
CRUX

CRUX DKGM-16W Bruksanvisning

26 September 2024
CRUX

CRUX DKVW-52B Bruksanvisning

26 September 2024
CRUX

CRUX DKVW-52 Bruksanvisning

26 September 2024
CRUX

CRUX ACP-MAX Bruksanvisning

26 September 2024
CRUX

CRUX RFM-MG1 Bruksanvisning

26 September 2024
CRUX

CRUX SOCGM-18L Bruksanvisning

26 September 2024
CRUX

CRUX SWRGM-49L Bruksanvisning

26 September 2024
CRUX

CRUX WVICH-03M Bruksanvisning

26 September 2024
CRUX

CRUX WVIFD-02F Bruksanvisning

26 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024