CyberPower Home Theater HT600WSU2A Bruksanvisning

CyberPower Inte kategoriserad Home Theater HT600WSU2A

Läs nedan 📖 manual på svenska för CyberPower Home Theater HT600WSU2A (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the CyberPower HT600WSU2A

Premium Surge Protector. This manual explains the

features and operation of the HT600WSU2A. Please take

a few moments to read this manual.

FEATURES

1. Power

Plug product into any standard, grounded AC outlet to

provide power to your surge protector outlets.

*Caution: Operating this surge protector from a

non-grounded outlet invalidates your “connected

equipment warranty” and puts your valuable

equipment at risk.

2. Firestop Design Advanced Metal-Oxide Varistor

(MOV) with Built-In Fuses

Encased component dissipates surge events and

potential ﬂame, sparks, and heat.

3. Rotating Outlet Bar

The 90-degree rotating outlet bars allow for easier

connection of multiple electronic devices when the wall

tap is mounted in a hard to reach location.

4. Six Tamper-Resistant Outlets

4 standard and 2 transformer spaced outlets.

5. Advanced Protection - Surge Protected LED

Illuminated when protection is working properly.

6. Clean Power - Ground LED

Illuminated when properly grounded.

7. USB Charging Ports*

Connect and charge up to 2 USB devices using the

surge protected USB charging ports.

*USB outlets cannot be used as a USB hub. This device

does not transfer data.

SPECIFICATIONS

• HT600WSU2AModel Number:

• 4 standard and 2 transformer spaced outletsOutlets:

• USB Charging Rating : 5 V/4.8 A total

• Surge Protection: 1,680 Joules

• Electrical Rating: 125 V/15 A/1875 W

• UL Clamping Voltage: UL 1449 3rd/500 V (L-N, L-G, L-G)

• Maximum Peak Current: 60,000 A

• 3 AC Lines Protected: H-N: 30,000 A, H-G: 15,000 A,

N-G: 15,000 A (The maximum surge possible on

household wiring is 6,000 volts)

• Response Time: Less than 1 nanosecond

• Attenuation: Up to 43 dB

• EMI/RFI Filtration: 150 kHz to 100 MHz

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only

in dry locations and only indoors. plug into DO NOT

another relocatable power tap. “daisy chain” DO NOT

surge protectors. DO NOT use with any aquarium

equipment. use if properly grounded outlets are DO NOT

not available. DO NOT install this device if there is less

than 10 meters (30 feet) or more of wire between the

electrical outlet and electrical service panel. DO NOT use

with ground-fault circuit-interrupter receptacles or

receptacles with indicator lights or controls. use DO NOT

for medical or life support equipment. To reduce the risk

of ﬁre or electric shock, do not use this device with a

receptacle in which the slot openings do not align with

the blades. This device features an internal protection

that will disconnect the surge protective component at

the end of its useful life, but it will maintain unprotected

power to the load.

TROUBLESHOOTING

▪ If the grounded indicator does not light when you plug

in the surge protector, move the surge protector to a

dierent grounded three-prong AC outlet. If it still does

not light, return the product to the retailer for

assistance. If the surge protector appears to be working

properly, your outlets may not be a properly grounded

and need to be repaired by a professional electrician. If

the grounded indicator turns o after a period of use,

the surge protection has been depleted. Replace your

surge protector.

▪ If the protected indicator does not light, the surge

protector’s AC lines are no longer protected from surge.

The surge protector may have received a power surge

or spike beyond its speciﬁed limits that overloaded the

protection circuitry and rendered it inactive. The surge

protector has protected your connected equipment as

designed, but it will not protect against future surges,

and spikes. It should be replaced.

TECHNICAL SUPPORT

Please contact our Tech Support Department with

installation, troubleshooting, or general product questions.

• Phone: 1-877-297-6937

• Email: tech@cpsww.com

• Hours of Operation:

Monday – Friday 7:00am – 6:00pm CST

USER MANUAL

6-Outlet Surge Protector

HT600WSU2A

6-Outlet Surge Protector

HT600WSU2A

1 2

TOP

ADVANCED

PROTECTION

CLE AN

POWER

3 4

LIMITED WARRANTY AND CONNECTED

EQUIPMENT GUARANTEE

Read the following terms and conditions carefully before

using the CyberPower HT600WSU2A (the “product”). By

using the product, you consent to be bound by the terms

and conditions of this limited warranty and connected

equipment guarantee (together referred to as this

“warranty”). IF YOU DO NOT AGREE TO THE TERMS AND

CONDITIONS OF THIS WARRANTY, YOU SHOULD RETURN

THE PRODUCT FOR A FULL REFUND PRIOR TO USING IT.

Who is providing this warranty, and what does it cover?

Cyber Power Systems (USA), Inc. (“CyberPower”) provides

this limited warranty. It only covers the original purchaser

and ends if you no longer own the product. This warranty

covers defects in materials and workmanship in the product

under normal use and conditions. It also covers equipment

connected to the product damaged because of the failure of

the product. This warranty covers the product and

connected equipment for as long as you own the product.

How do you open a connected equipment claim?

1. Call us at (877) 297-6937, or write to us at Cyber Power

Systems (USA), Inc., 4241 12th Ave. E., STE 400, Shakopee,

MN 55379, or send us an email at claims@cpsww.com

within 10 days of the occurrence for instructions.

2. When you contact CyberPower, identify the product, the

purchase date, and the item(s) of connected equipment.

Have information on all applicable insurance or other

resources of recovery/payment that are available to the

initial customer, and request a claim number.

3. You must provide a dated purchase receipt (or other proof

of the original purchase) for the CyberPower unit and

connected equipment. You also need to provide a

description of the damage to your connected equipment.

4. Pack and ship the product to CyberPower and the item(s)

of connected equipment, a repair cost estimate for the

damage to the connected equipment, and all claim forms

that CyberPower provides to you. Show the claim number

on the shipping label, or include it with the product. You

must prepay all shipping costs. You are responsible for

packaging and shipment, and you must pay the cost of

the repair estimate.

What will CyberPower do to correct problems?

CyberPower will inspect and examine the product. If the

product is defective in material or workmanship, CyberPower

will replace it at CyberPower’s expense, or CyberPower will

refund the full purchase price you paid for the product

(purchase receipt showing price paid is required). If the

product failed to protect any equipment plugged into it, we

will also send you forms for making your claim for the

connected equipment. We will replace the equipment that

was damaged because of the failure of the product or pay

you the fair market value (NOT REPLACEMENT COST) of

This device is manufactured using environmentally-safe procedures in

compliance with the Restriction of Hazardous Substances (RoHS) directive.

Please join CyberPower in caring for the environment by recycling

this manual.

PRODUCT REGISTRATION

Prompt product registration assures coverage under the limited

warranty, and also allows the opportunity of notiﬁcations for

product enhancements, upgrades, and other announcements.

Registration is quick and easy. Go to the Product Registration

Page at www.cyberpowersystems.com/registration.

CONTACT INFORMATION

Cyber Power Systems (USA), Inc.

4241 12th Avenue East Suite 400

Shakopee, MN 55379

Toll-free: 1-877-297-6937 | CyberPowerSystems.com

CONFORMANCE APPROVALS

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) This device may

not cause harmful interference. (2) This device must accept

any interference received, including interference that may

cause undesired operation.

Warning: Changes or modiﬁcations to this unit, not expressly

approved by the party responsible for compliance, could void

the user’s authority to operate the equipment. This Class B

digital apparatus complies with Canadian ICES-003 (CAN

ICES-3 (B)/NMB (B)).

NOTE: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and radiates radio

frequency energy. If not installed and used in accordance with

the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or

television reception, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

the equipment at of the time of the damage. We will use Orion

Blue Book, another third-party valuation guide, eBay, Craigslist,

or other source to establish that amount. Our maximum liability

is limited to $250,000 for the HT600WSU2A.

Who pays for shipping?

We pay shipping when we send items to you; you pay when

you send items to us.

What are some things this Warranty does not cover?

1. THIS WARRANTY DOES NOT COVER: ANY SOFTWARE THAT

WAS DAMAGED, SOFTWARE THAT NEEDS TO BE REPLACED

DUE TO THE FAILURE OF THE PRODUCT, OR ANY DATA THAT

IS LOST AS A RESULT OF THE FAILURE. THIS WARRANTY

DOES NOT COVER THE RESTORATION OF DATA OR

RECORDS, OR THE REINSTALLATION OF SOFTWARE.

2. This warranty does not cover: misuse, modiﬁcation, operation

or storage outside of the environmental limits of the product

or the equipment connected to it. It does not cover damage

while in transit or in storage; if there has been improper

operation or maintenance, or use with items not designed or

intended for use with the product, such as laser printers,

appliances, aquariums, medical, or life support devices, etc.

What are the other limitations?

The sole and exclusive remedies of the initial customer are

those provided by this warranty.

1. This warranty does not apply unless the product and the

connected equipment were connected to properly wired and

grounded outlets (including compliance with electrical and

safety codes of the most current electrical code), without the

use of any adapters or other connectors.

2. The product must have been plugged directly into the power

source. The equipment connected to the product must be

directly connected in the product, not “daisy chained”

together in serial fashion with any extension cords, another

product, or device similar to the product, surge suppressor,

or power tap. Any such installation voids the warranty.

3. The product and connected equipment must have been used

properly in a suitable environment, in conformance with any

applicable license, instruction manual, or warnings.

4. The product must have been used at all times within the

limitations on the product’s VA capacity.

Where can I get more information?

Cyber Power Systems (USA), Inc.

4241 12th Avenue East Suite 400

Shakopee, MN 55379;

Call us at (877) 297-6937;

Send us an email at claims@cpsww.com.

WARNING: This product can expose you to chemicals, including

styrene, which is known to the State of California to cause cancer.

For more information, go to www.p65warnings.ca.gov.

CyberPowerSystems.com

All other trademarks are the property of their respective owners.

UL Listed to U.S. and Canadian Safety Standards UL 1449. This product

is listed to applicable U.S. and Canadian safety standards by

Underwriters Laboratories Inc.

Full compliance with RoHS.

K01-0000665-01

Produktspecifikationer

Varumärke:	CyberPower
Kategori:	Inte kategoriserad
Modell:	Home Theater HT600WSU2A
Färg på produkten:	Black, Yellow
Vikt:	513 g
Bredd:	80 mm
Höjd:	25 mm
Snäll:	Krimptang
Antal per paket:	1 stuk(s)
Längd:	220 mm
Typ-av-nätverksanslutning:	RJ-11, RJ-12, RJ-22, RJ-45