CyberPower MP1073SS Bruksanvisning

CyberPower Inte kategoriserad MP1073SS

Läs nedan 📖 manual på svenska för CyberPower MP1073SS (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

FEATURES

1. ON/OFF Reset Switch Breaker

Control power to all outlets. The switch is also a 15A breaker.

When an overload occurs, it will automatically switch o. To

resume operation, ensure the overload condition is corrected

and reset the surge protector by switching the unit ON.

2. Six Standard Outlets

SPECIFICATIONS

• Model Number: B602RC1/B602RC3/MP1003SS/MP1073SS

• Outlets: 6 Standard Outlets

• Surge Protection: 500 Joules

• Electrical Rating: 125V/15A/1875W

• UL Clamping Voltage: UL 1449 3rd/800V (L-N)

• Maximum Peak Current: 15,000A

• Response Time: Less than 1 nanosecond

• Circuit Breaker: Resettable 15Amp

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in dry

locations and only indoors. plug into another DO NOT

relocatable power tap. “daisy chain” surge protectors. DO NOT

DO NOT use with any aquarium equipment. use if DO NOT

properly grounded outlets are not available. install DO NOT

this device if there is not at least 10 meters (30 feet) or more of

wire between the electrical outlet and electrical service panel.

This device features an internal protection that will disconnect

the surge protective component at the end of its useful life, but

will maintain power to the load – now unprotected.

TROUBLESHOOTING

If the ON/OFF is switched o, the 15 AMP circuit breaker may

have tripped. Examine your connected equipment and remove

the device that is overloading the circuit. Then, turn the

ON/OFF switch back to RESET.

TECHNICAL SUPPORT

Please contact our Tech Support department with installation,

troubleshooting, or general product questions.

• Phone: 1-877-297-6937

• Email: tech@cpsww.com

• Hours of Operation:

Monday – Friday 7:00am – 6:00pm CST

USER’S MANUAL

6-Outlet Surge Protector

B602RC1/B602RC3

MP1003SS/MP1073SS

6-Outlet Surge Protector

B602RC1/B602RC3

MP1003SS/MP1073SS

LIMITED WARRANTY AND CONNECTED EQUIPMENT GUARANTEE

Read the following terms and conditions carefully before using

the CyberPower B602RC1/B602RC3/MP1003SS/MP1073SS

(the “CPS Product”). By using the CPS Product, you consent to

be bound by the terms and conditions of this Limited Warranty

and Connected Equipment Guarantee (together referred to as

this “Warranty”). IF YOU DO NOT AGREE TO THE TERMS AND

CONDITIONS OF THIS WARRANTY, YOU SHOULD RETURN

THE PRODUCT FOR A FULL REFUND PRIOR TO USING IT.

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting CyberPower B602RC1/B602RC3/

MP1003SS/MP1073SS Surge Protector. The information

contained in this manual explains the features and operation

of the B602RC1/B602RC3/MP1003SS/MP1073SS. Please take

a few moments to read this manual.

This device is manufactured using environmentally-safe

procedures in compliance with the Restriction of

Hazardous Substances (RoHS) directive.

Please join CyberPower in caring for the environment by

recycling this manual.

All other trademarks are the property of their respective owners.

www.cyberpower.com

Who is providing this Warranty, what does it cover?

Cyber Power Systems (USA), Inc. (“CyberPower”) provides

this Limited Warranty. It only covers the original purchaser and

ends if you no longer own the CPS Product. This warranty

covers defects in materials and workmanship in the CPS

Product under normal use and conditions. It also covers

equipment connected to the CPS Product and damaged

because of the failure of the CPS Product. This warranty

covers the CPS Product and connected equipment for as long

as you own the CPS Product.

How do you open a connected equipment claim?

1. Call us at (877) 297-6937 or write to us at Cyber Power

Systems (USA), Inc., 4241 12th Ave. E., STE 400, Shakopee, MN

55379, or send us an e-mail message at claims@cpsww.com

for instructions, within 10 days of the occurrence.

2. When you contact CyberPower, identify the Product, the

Purchase Date, and the item(s) of Connected Equipment.

Have information on all applicable insurance or other

resources of recovery/payment that are available to the

Initial Customer and Request a Claim Number.

3. You must provide a dated purchase receipt (or other proof

of the original purchase) for the Cyber Power unit and

connected equipment. You also need to provide a

description of the damage to your connected equipment.

4. Pack and ship the product to CyberPower and, if requested,

the item(s) of Connected Equipment, a repair cost estimate

for the damage to the Connected Equipment, and all claim

forms that CyberPower provides to you. Show the Claim

Number on the shipping label or include it with the product.

You must prepay all shipping costs, you are responsible for

packaging and shipment, and you must pay the cost of the

repair estimate.

What will CyberPower do to correct problems?

CyberPower will inspect and examine the CPS Product. If the

CPS Product is defective in material or workmanship,

CyberPower will repair or replace it at CyberPower’s expense,

or CyberPower will refund the full purchase price you paid for

the CPS Product (purchase receipt showing price paid is

required). If the CPS Product failed to protect any equipment

plugged into it, we will also send you forms for making your

claim for the connected equipment. We will repair or replace

the equipment that was damaged because of the failure of the

CPS Product or pay you the fair market value (NOT

REPLACEMENT COST) of the equipment at of the time of the

damage. We will use Orion Blue Book, another third-party

valuation guide, eBay, craigslist, or other source to establish

that amount. Our maximum liability is limited to $25,000 for

the B602RC1 and B602RC3.

Who pays for shipping?

We pay when we send items to you; you pay when you send

items to us.

What are some things this Warranty does not cover?

1. THIS WARRANTY DOES NOT COVER ANY SOFTWARE

THAT WAS DAMAGED OR NEEDS TO BE REPLACED DUE

TO THE FAILURE OF THE CPS PRODUCT OR ANY DATA

THAT IS LOST AS A RESULT OF THE FAILURE OR THE

RESTORATION OF DATA OR RECORDS, OR THE

REINSTALLATION OF SOFTWARE.

2. This Warranty does not cover: misuse, modiﬁcation,

operation or storage outside environmental limits of the

CPS Product or the equipment connected to it, or for

damage while in transit or in storage, nor if there has been

improper operation or maintenance, or use with items not

designed or intended for use with the CPS Product, such

as laser printers, appliances, aquariums, medical or life

support devices, etc.

What are the other limitations?

The sole and exclusive remedies of the Initial Customer are

those provided by this Warranty.

1. This Warranty does not apply unless the CPS Product and

the connected equipment were connected to properly

wired and grounded outlets (including compliance with

electrical and safety codes of the most current electrical

code), without the use of any adapters or other

connectors.

2. The CPS Product must have been plugged directly into the

power source and the equipment connected to the CPS

Product must be directly connected in the CPS Product,

not “daisy-chained” together in serial fashion with any

extension cords, another Product or device similar to the

CPS Product, surge suppressor, or power tap. Any such

installation voids the Warranty.

3. The CPS Product and connected equipment must have

been used properly in a suitable and proper environment,

in conformance with any applicable license, instruction

manual, or warnings.

4. The CPS Product must have been used at all times within

the limitations on the CPS Product’s VA capacity.

Where can I get more information?

Contact CyberPower at 4241 12th Ave E., STE 400, Shakopee,

MN 55379; call us at (877) 297-6937; or send us an e-mail

message at claims@cpsww.com.

PRODUCT REGISTRATION

Prompt product registration assures coverage under the Limited

Warranty, and also allows the opportunity to be notiﬁed of

product enhancements, upgrades, and other announcements.

Registration is quick and easy. Go to Product Registration

page at www.cyberpower.com.

CONTACT INFORMATION

Cyber Power Systems, Inc. 4241 12th Avenue East Suite 400

Shakopee, MN 55379

Toll-free: 1-877-297-6937 | CyberPower.com

K01-0000636-00

Produktspecifikationer

Varumärke:	CyberPower
Kategori:	Inte kategoriserad
Modell:	MP1073SS
Färg på produkten:	Wit
Vikt:	400 g
Bredd:	150.8 mm
Djup:	150.8 mm
Höjd:	33 mm
LED-indikatorer:	Ja
Placering:	Tafel
Frekvensband:	2.412 - 2.472, 5.18 - 5.32, 5.5 - 5.6, 5.64 - 5.7 GHz
Antal Ethernet LAN (RJ-45)-portar:	1
Internminne:	1024 MB
Typ processor:	Ja
Ethernet LAN, dataöverföringshastigheter:	10,100,1000 Mbit/s
Nätverksstandard:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.11r, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Säkerhetsalgoritmer som stöds:	802.1x RADIUS, AES, EAP-SIM, EAP-TLS, EAP-TTLS, MSCHAPv2, PEAP, WPA, WPA2
Antennförstärkningsnivå (max):	4 dBi
Förvaringstemperatur:	-30 - 70 °C
Internera:	Nee
Förvaringsfuktighet:	10 - 90 procent
Flashminne:	256 MB
Höjd, drift:	0 - 3000 m
Höjd vid förvaring:	0 - 4500 m
Maximal dataöverföringshastighet:	1000 Mbit/s
2,4 GHz:	Ja
5 GHz:	Ja
VLAN=support:	Ja
Wifi Multimedia (WMM)/(WME):	Ja
Power over Ethernet (PoE):	Ja
Antennfunktioner:	Ingebouwde antenne
Maximal dataöverföringshastighet (5 GHz):	867 Mbit/s
Antal kanaler:	29 kanalen
Sändningseffekt:	4 dBmW
Drifttemperatur (TT):	0 - 40 °C
Relativ luftfuktighet i drift (VV):	10 - 90 procent
Antal-produkter-ingår:	1 stuk(s)
Användartjänst för fjärrautentisering (RADIUS):	Ja