D-Link COVR-R2203 Bruksanvisning

Läs nedan 📖 manual på svenska för D-Link COVR-R2203 (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
PowrZone
x 2
Tri Band Whole Home Mesh Wi-Fi System
Simple GuideSetup
NOTE: To keep your Covr System running at peak
performance and take advantage of new features, it is
recommended that you keep yourrmware up to date.
We highly recommend that you enable the AUTO FIRMWARE
UPDATE feature. This will ensure that your Covr System is
always running the latest firmware.
Download the app from the D-Link Wi-Fi
App Store or Google Play. Run the app and
tap “Install New Device” (COVR-R2203) to
get started.
For more support, please visit: support.dlink.ca/COVR-R2203 1.800.361.5265
D-Link Wi-Fi App Setup
(iOS and Android Devices)
IMPORTANT:
For proper installation, start with
”. Only plug in and power up Covr Point A
the extension Covr Point when directed to
during setup.
1
Package Contents
LED Behaviour
Flashing White - Extension PointCovr
Weak Signal - Try moving it closer to
Covr Point A.
Flashing Orange - Extension PointCovr
Not In Range/No Connection - Try moving it
closer to Covr Point A.
Solid Red - Any PointCovr
Your Covr Points will be solid red during boot
up (powered on). Boot up can take anywhere
from 2-3 minutes.
Flashing Red - Any PointCovr
Flashing Red indicates that there is a problem
with the device. If flashing red, please contact
our support team.
Solid White
This means everything is connected and
working properly.
Flashing Orange - Covr Point A
No internet connection - Try powering o
your modem for 30 seconds (removing
any backup battery if applicable) and
powering it back on.
A
Start Here!
See other side for
Option 2 (Web Browser
Setup) and Placement Tips
Option 1:
There are two easy ways to set up your Covr Wi-Fi
System, choose one of the following:
Option 1) D-Link Wi-Fi App Setup
Option 2) Web Browser Setup
x 1x 3 x 1
A
x 1
For more support, please visit: support.dlink.ca/COVR-R2203 1.800.361.5265
Web Browser Setup
(PC/Mac/Mobile device)
Covr Point Placement Tips
MODEM
1
Power o your Internet modem and connect
one end of the Ethernet cable to port 1 on
Covr Point A, and connect the other end to
your Internet-connected modem.
1
NOTE: If your DSL or cable modem uses a battery backup,
please remove the backup battery and ensure all lights are o
on the modem. Refer to the modem’s user manual if required.
Place your Covr Points around your home to extend
your whole home Wi-Fi. For best performance,
place the Covr Points close enough to each other
to maintain a strong signal. Use the LED Signal
Indicator to help find a location. (See LED behaviour
on previous page.)
Power your Internet modem back on and plug
in Covr Point A. Wait for the Covr LED to turn
from red to flashing orange before moving
on to the next step. This may take up to 3
minutes.
2
On a PC/Mac or mobile device, connect to
the Wi-Fi name (SSID) printed on the bottom
of Covr Point A, or on the included Wi-Fi
Conguration Card.
3
Wi-Fi
Wi-Fi
Wi-Fi
Open a web browser and type http://covr.local./
into a web browser and follow the instructions to
complete the setup.
4http://covr.local./
Option 2: (Only required if you did not install using Option 1 - D-Link Wi-Fi App Setup)
IMPORTANT:
For proper installation, start with
”. Only plug in and power up Covr Point A
the extension Covr Point when directed to
during setup.
NOTE: Ethernet Setup is not supported.

Produktspecifikationer

Varumärke: D-Link
Kategori: Inte kategoriserad
Modell: COVR-R2203

Behöver du hjälp?

Om du behöver hjälp med D-Link COVR-R2203 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad D-Link Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer