D-Link DCS-9500T Bruksanvisning

D-Link övervakningskamera DCS-9500T

Läs nedan 📖 manual på svenska för D-Link DCS-9500T (91 sidor) i kategorin övervakningskamera. Denna guide var användbar för 12 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/91

Group Temperature Screening Camera

User Manual

Issue V1.1（2020-04-09） 1

Group Temperature

Screening Camera

User Manual

Issue V 1.0

Data 2020-06-09

Precautions

Fully understand this document before using this device, and strictly observe rules in this

document when using this device. If you install this device in public places, provide the

tip "You have entered the area of electronic surveillance" in an eye-catching place.

Failure to correctly use electrical products may cause fire and severe injuries. To prevent

accidents, carefully read the following context:

Symbols

This document may contain the following symbols whose meanings are described

accordingly.

Symbol Description

It alerts you to fatal dangers which, if not avoided, may

cause deaths or severe injuries.

It alerts you to moderate dangers which, if not avoided,

may cause minor or moderate injuries.

It alerts you to risks. Neglect of these risks may cause

device damage, data loss, device performance

deterioration, or unpredictable results.

It provides a tip that may help you resolve problems or

save time.

It provides additional information.

To prevent electric shocks or other dangers, keep power plugs dry and clean.

 Strictly observe installation requirements when installing the device. The

manufacturer shall not be held responsible for device damage caused by users' non-

conformance to these requirements.

 Strictly conform to local electrical safety standards and use power adapters which are

marked with the LPS standard when installing and using this device. Otherwise, this

device may be damaged.

 Use accessories delivered with this device. The voltage must meet input voltage

requirements for this device.

 If this device is installed in places with unsteady voltage, ground the device to

discharge high energy such as electrical surges in order to prevent the power supply

from burning out.

 When this device is in use, ensure that no water or any liquid flows into the device. If

water or liquid unexpectedly flows into the device, immediately power off the device

and disconnect all cables (such as power cables and network cables) from this device.

 Do not place the thermal imaging camera and unpackaged products at a radiation

source with a high intensity regardless of whether the device is in the normal power-

on state, for example, the sun, laser, and electric arc welder, and place the thermal

imaging camera and unpackaged products against objects with a high heat source, for

example, the sun. Otherwise, the accuracy of the thermal imaging camera will be

affected. In addition, the detector in the thermal imaging camera may be permanently

damaged.

 If this device is installed in places where thunder and lightning frequently occur,

ground the device nearby to discharge high energy such as thunder strikes in order to

prevent device damage.

 Unless otherwise specified in the user manual, do not use the thermal imaging camera

in an environment with the temperature lower than -20 C (-4 F) or higher than 60 C  

(+140 F). Otherwise, the images displayed by the thermal imaging camera are

abnormal and the device may be damaged if working beyond the temperature range

for a long period.

 During the outdoor installation, prevent the morning or evening sunlight incidence to

the lens of the thermal imaging camera. The sun shade must be installed and adjusted

according to the angle of the sunlight illumination.

 Avoid heavy loads, intensive shakes, and soaking to prevent damages during

transportation and storage. The warranty does not cover any device damage that is

caused during secondary packaging and transportation after the original packaging is

taken apart.

 This device is a static sensitivity device. Improper static may damage the thermal

imaging camera. ESD protection measures and reliable grounding must be well

prepared for device installation and uninstallation.

 Protect this device from fall-down and intensive strikes, keep the device away from

magnetic field interference, and do not install the device in places with shaking

surfaces or under shocks.

 Use a soft and dry cloth to clean the device body. In case that the dirt is hard to

remove, use a dry cloth dipped in a small amount of mild detergent and gently wipe

the device, and then dry it again. Pay special attention to the front window of the

thermal imaging camera because this is precision optics. If the front window has

water spots, use a clean and soft cloth moistened with water to wipe it. If the front

window needs further cleaning, use a soft cloth dampened with isopropyl alcohol or

detergent. Improper cleaning can cause damage to the device.

 The lens window of the thermal imaging camera is designed to be applicable to an

outdoor environment. The window is coated with durable coating material, but may

Produktspecifikationer

Varumärke:	D-Link
Kategori:	övervakningskamera
Modell:	DCS-9500T
Vikt:	103 g
Maximal räckvidd:	- m
Frekvens:	446.00625 - 446.09375 MHz
Mått (B x D x H):	60 x 25 x 103 mm
Batterier-ingår:	Ja
Batteriteknik:	Alkaline
Antal kanaler (totalt):	24 kanalen