Dahua Technology DH-IPC-HDW2531R-ZS Bruksanvisning

Dahua Technology övervakningskamera DH-IPC-HDW2531R-ZS

Läs nedan 📖 manual på svenska för Dahua Technology DH-IPC-HDW2531R-ZS (17 sidor) i kategorin övervakningskamera. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/17

Dahua HD IR Network Dome Camera Quick Start Guide

Version 1.0.0

ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.

Dahua HD IR Network Dome Camera Quick Start Guide

Welcome

Thank you for purchasing our network cameras.

This user’s manual is designed to be a reference tool for using your product .

Please read the following safeguards and warnings carefully before you use this series product.

Please keep this user’s manual well for future reference.

Important Safeguards and Warnings

Electrical safety

 All installation and operation should conform to your local electrical safety codes.

 The power source shall conform to the requirement of the Safety Extra Low Voltage (SELV)

standard, and supply power with rated voltage which conforms to Limited power Source

requirement according IEC60950-1. Please note that the power supply requirement is subject to

the device label.

 Make sure the power supply is correct before operating the device.

 A readily accessible disconnect device shall be incorporated in the building installation wiring

 Prevent the power cable from being trampled or pressed, especially the plug, power socket and the

junction extruded from the device.

 We assume no liability or responsibility for all the ﬁres or electrical shock caused by improper

handling or installation.

Environment

 Do not aim the device at strong light to focus, such as lamp light and sun light, otherwise it might

cause over brightness or light marks, which are not the device malfunction, and aﬀect the longevity

of Charge Coupled Device (CCD) or Complementary Metal-Oxide Semiconductor (CMOS).

 Do not place the device in a damp or dusty environment, extremely hot or cold temperatures, or the

locations with strong electromagnetic radiation or unstable lighting.

 Keep the camera away from water or other liquid to avoid damages to the internal components.

 Keep the indoor device away from rain or damp to avoid ﬁre or lightning.

 Keep sound ventilation to avoid heat accumulation.

 Transport, use and store the device within the range of allowed humidity and temperature.

 Heavy stress, violent vibration or water splash are not allowed during transportation, storage and

installation.

 Pack the device with standard factory packaging or the equivalent material when transporting the

device.

 The device needs to be installed in the location where professional staff can cover (professionals

need to know the attentions of using the device), non-professionals are not allowed to enter device

installation area when the device is operating normally, which may cause accidental damage.

Operation and Daily Maintenance

Dahua HD IR Network Dome Camera Quick Start Guide

 Do not directly touch the heat dissipation component of the device to avoid scald.

 Do not dismantle the device because there is no component that can be ﬁxed by users themselves.

Otherwise, it might cause water leakage or bad image due to unprofessional dismantling.

 Please contact after-sale service to replace desiccant when it becomes green. (The desiccant is

not provided by default)

 It is recommended to use the device together with lightning arrester to improve lightning protection

eﬀect.

 It is recommended to get the grounding holes to be grounded to enhance the reliability of the

device.

 Do not directly touch the optic component CCD or CMOS. You can use the air blower to blow away

the dust or dirt on the lens surface. Please use a dry cloth wetted by alcohol to wipe away the dust

gently if necessary.

 Use the dry soft cloth to clean the device. If the is diﬀicult to be removed, please wipe it away dust

with a clean cloth wetted slightly by the mild detergent, and then use the dry cloth to clean the

device. Do not use volatile solvents like alcohol, benzene, thinner, or strong detergent with

abrasiveness, otherwise it will damage the surface coating or reduce the working performance of

the device.

 When installing or using the device, do not directly touch or wipe the surface of the dome cover

because it is an optical device. If stained with dirt, use oil-free soft brush or air blower to gently

wipe it away. If stained with grease or ﬁngerprint, use soft cloth to gently wipe the water drop or oil

and wait till it is dry, and then use oil-free cotton cloth or lens cleaning paper soaked with alcohol or

detergent to wipe from the lens center outward till it is clean.

 We are not liable for any problems caused by unauthorized modiﬁcation or attempted repair.

 The dome cover is a kind of optical component, please do not touch or wipe the cover surface

during installation and application, it may stain dust, grease or ﬁngerprint, you can use absorbent

cotton diethyl ether or use soft cloth to dip some water and then wipe gently. You can to dip some

also use air gun to remove the dust if the cover is stained with dust.

Warnings

 Please strengthen the protection of network, device data and personal information, adopt

necessary measures of guarantee device network security, including but not limited to using strong

password, modifying password regularly, upgrading ﬁrmware to the latest version, isolating

computer network and so on. For the IP camera ﬁrmware of some old version, the ONVIF

password won’t be modiﬁed automatically after the main password of the system is modiﬁed. You

need to upgrade the camera ﬁrmware or upgrade the ONVIF password manually.

 Please modify the default password after login to avoid being stolen.

 Use the standard components provided by manufacturer and make sure the device is installed and

ﬁxed by professional engineers.

 The surface of the image sensor should not be exposed to laser beam radiation in an environment

where a laser beam device is used.

 Do not provide two or more power supply sources for the device; otherwise it might damage the

device.

Produktspecifikationer

Varumärke:	Dahua Technology
Kategori:	övervakningskamera
Modell:	DH-IPC-HDW2531R-ZS

Behöver du hjälp?

Om du behöver hjälp med Dahua Technology DH-IPC-HDW2531R-ZS ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

övervakningskamera Dahua Technology Manualer

Dahua Technology Pro IPC-HDPW5442G-Z Bruksanvisning

10 Januari 2025

Dahua Technology N588D63S Bruksanvisning

31 December 2025

Dahua Technology N43BU82 Bruksanvisning

31 December 2025

Dahua Technology Ultra IPC-HFW7442H-Z4 Bruksanvisning

21 Oktober 2024

Dahua Technology IPC-HFW7842H-Z Bruksanvisning

19 Oktober 2024

Dahua Technology Ultra IPC-HF7842F Bruksanvisning

8 Oktober 2024

Dahua Technology SD6C230I-HC Bruksanvisning

7 Oktober 2024

Dahua Technology Lite IPC-HDW1320S Bruksanvisning

4 Oktober 2024

Dahua Technology Ultra IPC-HF7442F-FR Bruksanvisning

4 Oktober 2024

Dahua Technology N83BU82 Bruksanvisning

23 September 2024

övervakningskamera Manualer

Nyaste övervakningskamera Manualer

Philips B120E Bruksanvisning

16 Januari 2025

Hikvision DS-2CE59U1T-AVPIT3ZF Bruksanvisning

8 Januari 2025

Hikvision IDS-2CD7526G0-IZHSY Bruksanvisning

8 Januari 2025

Hikvision DS-2CD2163G0-I(S) Bruksanvisning

8 Januari 2025

Hikvision DS-2CD2H83G1-IZS Bruksanvisning

8 Januari 2025

Speco Technologies O5LB1 Bruksanvisning

8 Januari 2025

ZKTeco AntarVis 2.0 Bruksanvisning

8 Januari 2025

Speco Technologies O2P30X Bruksanvisning

8 Januari 2025

TP Link InSight S345ZI Bruksanvisning

8 Januari 2025

Lorex LNZ43P4A Bruksanvisning

8 Januari 2025