Dahua Technology HAC-HDBW1239RA-IL-A Bruksanvisning

Dahua Technology övervakningskamera HAC-HDBW1239RA-IL-A

Läs nedan 📖 manual på svenska för Dahua Technology HAC-HDBW1239RA-IL-A (9 sidor) i kategorin övervakningskamera. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/9

HDCVI Camera

User’s Manual

V1.0.

III

Important Safeguards and Warnings

Electrical Safety

 All installation and operation should conform to your local electrical safety codes.

 The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no

higher than PS2. Note that the power supply requirements are subject to the device label.

 A readily accessible disconnect device shall be incorporated in the building installation wiring.

 Make sure that the power adapter meets the operating voltage requirement before device

powering up the device (The material and length of the power cable might influence the device

voltage).

 Prevent the power cable from being trampled or pressed, especially the plug, power socket and

the junction extruded from the device.

 We assume no liability or responsibility for all the fires or electrical shock caused by improper

handling or installation.

Operating Requirements

 Do not aim the device at strong light to focus, such as lamp light and sun light.

 Transport, use and store the device within the range of allowed humidity and temperature.

 Keep the device away from water or other liquid to avoid damages to the internal components.

 Keep sound ventilation to avoid heat accumulation.

 Heavy stress, violent vibration or water splash are not allowed during transportation, storage

and installation.

 Pack the device with standard factory packaging or the equivalent material when transporting

the device.

 You are recommended to use the device together with lightning arrester to improve lightning

protection effect.

 You are recommended to ground the device to enhance reliability.

 You are recommended to use qualified video transmission cable to improve video quality, and

use RG59 coaxial cable or higher standard.

WARNING

 Use standard components or accessories provided by the manufacturer and make sure that the

device is installed and maintained by professional engineers.

 The surface of the image sensor should not be exposed to laser beam radiation in an

environment where a laser beam device is used.

 Do not provide two or more power supply sources for the device; otherwise it might damage

the device.

 If PoC power supply is used, do not connect any other device between the device and PoC

transceiver including UTC, Balun, optical transceiver, distributor and convertor and so on;

otherwise, the device might get burned.

 PoC supply voltage is up to 52V. Do not dismantle the device during normal operation;

otherwise it might cause danger to both device and users due to high voltage.

Under Main Stream, click More Setting. Step 3

Encode setting Figure 3-2

On the More Setting interface, enable Audio Encode function and then configure the Step 4

audio settings. In the Audio Format list, leave it as default; in the list, selectAudio Source

HDCVI.

Click Save. Step 5

More setting Figure 3-3

On , . the Encode interface click ApplyStep 6

Operating PTZ Control Panel 3.3

3.3.1 Operating OSD Menu

 The OSD menus of different cameras might vary, and the actual product shall prevail.

 When you use OSD menu to restore the device to default settings, the resolution, mode, frame

rate and language of the device will not be restored.

On - t the live interface, right click he device that you want to configure. The shortcut menu is Step 1

Produktspecifikationer

Varumärke:	Dahua Technology
Kategori:	övervakningskamera
Modell:	HAC-HDBW1239RA-IL-A
Färg på produkten:	Wit
Vikt:	230 g
Diameter:	170 mm
Strömförbrukning (max):	12 W
Form:	Rond
Färg ljus:	Koel wit
Ljus färgtyp:	Wit
Färgtemperatur (max):	6000 K
Ljuseffekt (max):	525 lm