Dahua Technology N41BK22 Bruksanvisning

Dahua Technology övervakningskamera N41BK22

Läs nedan 📖 manual på svenska för Dahua Technology N41BK22 (15 sidor) i kategorin övervakningskamera. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/15
Dahua HD IR Waterproof Eyeball Network Camera Quick Start Guide
Dahua HD IR Waterproof Eyeball Network Camera
Quick Start Guide
Version 1.0.0
Dahua Technology , USA Ltd.
Dahua HD IR Waterproof Eyeball Network Camera Quick Start Guide
i
Welcome
Thank you for purchasing our network cameras.
This user’s manual is designed to be a reference tool for using your product .
Please read the following safeguards and warnings carefully before you use this series product.
Please keep this user’s manual well for future reference.
Important Safeguards and Warnings
Electrical safety
All installation and operation should conform to your local electrical safety codes.
The power source shall conform to the requirement of the Safety Extra Low Voltage (SELV)
standard, and supply power with rated voltage which conforms to Limited power Source
requirement according IEC60950-1. Please note that the power supply requirement is subject to
the device label.
Make sure the power supply is correct before operating the device.
A readily accessible disconnect device shall be incorporated in the building installation wiring
Prevent the power cable from being trampled or pressed, especially the plug, power socket and the
junction extruded from the device.
We assume no liability or responsibility for all the res or electrical shock caused by improper
handling or installation.
Environment
Do not aim the device at strong light to focus, such as lamp light and sun light, otherwise it might
cause over brightness or light marks, which are not the device malfunction, and aect the longevity
of Charge Coupled Device (CCD) or Complementary Metal-Oxide Semiconductor (CMOS).
Do not place the device in a damp or dusty environment, extremely hot or cold temperatures, or the
locations with strong electromagnetic radiation or unstable lighting.
Keep the camera away from water or other liquid to avoid damages to the internal components.
Keep the indoor device away from rain or damp to avoid re or lightning.
Keep sound ventilation to avoid heat accumulation.
Transport, use and store the device within the range of allowed humidity and temperature.
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
Pack the device with standard factory packaging or the equivalent material when transporting the
device.
The device needs to be installed in the location where professional staff can cover (professionals
need to know the attentions of using the device), non-professionals are not allowed to enter device
installation area when the device is operating normally, which may cause accidental damage.
Operation and Daily Maintenance
Dahua HD IR Waterproof Eyeball Network Camera Quick Start Guide
ii
Do not directly touch the heat dissipation component of the device to avoid scald.
Do not dismantle the device because there is no component that can be xed by users themselves.
Otherwise, it might cause water leakage or bad image due to unprofessional dismantling.
Please contact after-sale service to replace desiccant when it becomes green. (The desiccant is
not provided by default)
It is recommended to use the device together with lightning arrester to improve lightning protection
eect.
It is recommended to get the grounding holes to be grounded to enhance the reliability of the
device.
Do not directly touch the optic component CCD or CMOS. You can use the air blower to blow away
the dust or dirt on the lens surface. Please use a dry cloth wetted by alcohol to wipe away the dust
gently if necessary.
Use the dry soft cloth to clean the device. If the dust is difcult to be removed, please wipe it away
with a clean cloth wetted slightly by the mild detergent, and then use the dry cloth to clean the
device. Do not use volatile solvents like alcohol, benzene, thinner, or strong detergent with
abrasiveness, otherwise it will damage the surface coating or reduce the working performance of
the device.
When installing or using the device, do not directly touch or wipe the surface of the dome cover
because it is an optical device. If stained with dirt, use oil-free soft brush or air blower to gently
wipe it away. If stained with grease or ngerprint, use soft cloth to gently wipe the water drop or oil
and wait till it is dry, and then use oil-free cotton cloth or lens cleaning paper soaked with alcohol or
detergent to wipe from the lens center outward till it is clean.
We are not liable for any problems caused by unauthorized modication or attempted repair.
The dome cover is a kind of optical component, please do not touch or wipe the cover surface
during installation and application, it may stain dust, grease or ngerprint, you can use absorbent
cotton diethyl ether or use soft cloth to dip some water and then wipe gently. You can to dip some
also use air gun to remove the dust if the cover is stained with dust.
Warnings
Please strengthen the protection of network, device data and personal information, adopt
necessary measures of guarantee device network security, including but not limited to using strong
password, modifying password regularly, upgrading rmware to the latest version, isolating
computer network and so on. For the IP camera rmware of some old version, the ONVIF
password won’t be modified automatically after the main password of the system is modified. You
need to upgrade the camera rmware or upgrade the ONVIF password manually.
Please modify the default password after login to avoid being stolen.
Use the standard components provided by manufacturer and make sure the device is installed and
xed by professional engineers.
The surface of the image sensor should not be exposed to laser beam radiation in an environment
where a laser beam device is used.
Do not provide two or more power supply sources for the device; otherwise it might damage the
device.

Produktspecifikationer

Varumärke: Dahua Technology
Kategori: övervakningskamera
Modell: N41BK22

Behöver du hjälp?

Om du behöver hjälp med Dahua Technology N41BK22 ställ en fråga nedan och andra användare kommer att svara dig


övervakningskamera Dahua Technology Manualer

Dahua Technology

Dahua Technology Ultra IPC-HFW7442H-Z4 Bruksanvisning

21 Oktober 2024
Dahua Technology

Dahua Technology IPC-HFW7842H-Z Bruksanvisning

19 Oktober 2024
Dahua Technology

Dahua Technology Ultra IPC-HF7842F Bruksanvisning

8 Oktober 2024
Dahua Technology

Dahua Technology SD6C230I-HC Bruksanvisning

7 Oktober 2024
Dahua Technology

Dahua Technology Lite IPC-HDW1320S Bruksanvisning

4 Oktober 2024
Dahua Technology

Dahua Technology Ultra IPC-HF7442F-FR Bruksanvisning

4 Oktober 2024
Dahua Technology

Dahua Technology N83BU82 Bruksanvisning

23 September 2024
Dahua Technology

Dahua Technology N45EFN2 Bruksanvisning

23 September 2024
Dahua Technology

Dahua Technology N45EJN2 Bruksanvisning

23 September 2024
Dahua Technology

Dahua Technology SD49225T-HN-W Bruksanvisning

23 September 2024

övervakningskamera Manualer

Nyaste övervakningskamera Manualer

Speco Technologies

Speco Technologies WDRB11H Bruksanvisning

27 Oktober 2024
Vivotek

Vivotek AI-108 Bruksanvisning

27 Oktober 2024
Acti

Acti E88 Bruksanvisning

27 Oktober 2024
Yale

Yale WIPC-303W Bruksanvisning

27 Oktober 2024
Grandstream

Grandstream GXV3611IR_HD Bruksanvisning

27 Oktober 2024
Airlive

Airlive DM-720 Bruksanvisning

27 Oktober 2024
Speco Technologies

Speco Technologies O8B7M Bruksanvisning

27 Oktober 2024
Grandstream

Grandstream GXV3615W Bruksanvisning

27 Oktober 2024
Vivotek

Vivotek IP8133 Bruksanvisning

27 Oktober 2024
Olympia

Olympia OC 1280P Bruksanvisning

27 Oktober 2024