Deaf Bonce Hannibal MH-61 v2 Bruksanvisning

Deaf Bonce högtalare Hannibal MH-61 v2

Läs nedan 📖 manual på svenska för Deaf Bonce Hannibal MH-61 v2 (16 sidor) i kategorin högtalare. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/16
Hannibal series
MH-61v2
http://alphard.audio
MIDRANGE SPEAKERS
9. Information on disposal of the electrical and electronic equipment
1. Introduction
2. Safety instructions
3. Wiring diagrams
4. Filtering, recommended amplifier settings
6. Dimensions
7. Box contents
8. Warranty and maintenance info
5. Specifications
(for the European countries with separate waste collection)
2
C O N T E N T S EN
1 . I N T R O D U C T I O N
12. To protect the cables use rubber gaskets if the wire passes through a hole in the plate, or other similar materials if it lies
close to the parts exposed to heat.
Please use the common sense when controlling volume!
11. Never stretch the cables outside of the car and near the moving parts of the car. This can lead to destruction of the
insulating layer, short circuit and fire.
10. The diameter of the speaker cables must be selected in accordance with the length and applied power.
CAUTION!!! High sound pressure can damage your health!
4. When working with tools follow safety rules.
2. Before installing the components, if possible store the product in it’s original package to avoid accidental damage to the
product.
6. Make sure that the location of the speaker does not hinder the proper operation of mechanical and electrical devices of the
vehicle.
7. Do not install components in places exposed to water, excessive humidity, high or low temperature, dust or dirt.
ATTENTION!!! The product may be operated at +5 °C (41F) to +40 °C (104F). In case of moisture condensation, let the product to
dry.
3. Be careful when installing and dismantling the speaker! Do not let the speaker drop to avoid damage of its moving parts.
5. Before the installation switch off the head unit and all other audio devices to avoid their damage.
8. When performing plumbing, drilling or cutting works with the car, make sure that there is no wiring, brake lines, fuel pipe or
other structural elements under the place of work. Follow the safety rules! Use protective glasses and gloves.
9. When stretching back the speaker cables make sure that they are not in contact with sharp edges or moving mechanical
devices. Make sure that they are rmly xed and protected over the entire length.
1. Fasten the speakers properly when installing it in the vehicle. If the component is disconnected during driving, it may cause
serious damage to the passengers of the vehicle or another vehicle.
2 . S A F E T Y I N S T R U C T I O N S
3 . W I R I N G D I A G R A M S
4 Ohm х 2 8 Ohm
S e ria l c on n ec t i o n o f th e s pe a ke r s
3
EN
Do not expose your amplifier to loads below the value predetermined by the manufacturer.
Various examples of connection types are given at the pages below. Use these examples to determine the required load
impedance of your connection.
To ensure proper use, please carefully read through this manual before using this product. It is especially important that you
read and observe caution’s in this manual. Please keep the manual in a safe and accessible place for future reference.
Thank you for purchasing this Deaf Bonce product of Hannibal series! Our company is committed to the creation of extremely
loud sound systems with no loss of quality.

Produktspecifikationer

Varumärke: Deaf Bonce
Kategori: högtalare
Modell: Hannibal MH-61 v2

Behöver du hjälp?

Om du behöver hjälp med Deaf Bonce Hannibal MH-61 v2 ställ en fråga nedan och andra användare kommer att svara dig




högtalare Deaf Bonce Manualer

högtalare Manualer

Nyaste högtalare Manualer