Dell P992 Bruksanvisning

Dell Övervaka P992

Läs nedan 📖 manual på svenska för Dell P992 (54 sidor) i kategorin Övervaka. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/54

Dell™ P992 Color Monitor Quick Setup Guide

Guide d’installation rapide du moniteur couleur DELL™ P992

Dell™ P992 Farbmonitor - Kurzreferenz

Guía de instalación rápida del monitor en color Dell™ P992

Guia de Instalação Rápida do Monitor Colorido Dell™ P992

Podręcznik szybkiej instalacji monitora kolorowego Dell™ P992

Pyководcтво по быcтpой ycтaновкe монитоpa Dell™ P992

Dell P992 Color Monitor Quick Setup Guide 1

AC IN

Safety Instructions

Observe the following safety guidelines when connecting and using your monitor:

• Be sure that your monitor is electrically rated to operate with the AC power available in your location.

• Locate your monitor near an easily accessible electrical outlet.

• Place the monitor on a solid surface and treat it carefully. The screen can be damaged if dropped, sharply hit, or touched

with a sharp or abrasive implement.

• Put your monitor in a location with low humidity and a minimum of dust.

• Never use your monitor if the power cable has been damaged. Do not allow anything to rest on the power cable, and

keep the cable away from where people could trip over it.

• Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock.

• To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitor’s case.

• Be sure to hold the plug, not the cable, when disconnecting the monitor from an electrical outlet.

• Openings in the monitor cabinet are provided for ventilation. To prevent overheating, these openings should not be

blocked or covered. Also, avoid using the monitor on a bed, sofa, rug, or other soft surface. Doing so may block the

ventilation openings in the bottom of the cabinet. If you put the monitor in a bookcase or some other enclosed space,

be sure to provide adequate ventilation.

• Do not expose the monitor to rain or use it near water. If the monitor accidentally gets wet, unplug it and contact an

authorized dealer immediately. You can clean the exterior of the monitor with a damp cloth when necessary, but be sure

to unplug the monitor first.

• If your monitor does not operate normally-in particular, if there are any unusual sounds or smells coming from it-unplug

the monitor immediately and contact an authorized dealer or service center.

Quick Specifications

AC input voltage/frequency 100 – 240 V ~ 50 – 60 Hz

Current 2.0 A (RMS) at 120 VAC and 1.0 A (RMS) at 220 VAC

Operating Temperature 0° to 40°C (32° to 104°F)

Dimensions 471 mm × 451 mm width depth)× × 461 mm (height ×

(18.54 × 17.76 × 18.15 inches)

Weight (monitor only) 25.5 kg (56 lbs 1 oz)

Other accessory items in the package CD-ROM User’s Guide, AC Cord

Connecting Your Monitor to a Computer

1Turn off your computer and unplug its power cable.

2Connect the HD15 video signal cable to the video output of your computer.

3Connect the power cable for your monitor to the power port on the back of the monitor.

4Plug the power cable of your computer and your monitor into a nearby outlet.

5Turn on your monitor and computer. If the monitor does not display an image, refer to the troubleshooting section of

this guide.

Dell™ P992 Color Monitor

Quick Setup Guide

2 Dell P992 Color Monitor Quick Setup Guide

Monitor Controls and Indicators

1These buttons are used to make adjustments to the monitor in the desired menu items.

2These buttons display the BRIGHT ( ) / CONTRAST ( ) menu. These buttons are also used to navigate the menu.

3This button is used to display the main menu on your screen. This button is also used to select the menu items and to

activate the adjustment.

4This button switches the power on and off. The LED indicator lights up in green when the monitor is turned on, and

lights up in amber when the monitor is in power saving mode. If the monitor is in the power save mode and the power

is turned off with the power switch, it may take up to 10 seconds for the LED to go black.

Driver Installation

Use the monitor CD to install the appropriate monitor driver for your operating system.

The following OS messages might be slightly different from the actual message that appears on your PC, but the meaning

is the same.

Microsoft

Windows

XP Operating System

To manually install or update the driver, perform the following steps:

Insert the monitor CD into the CD-ROM drive.

2. Click Start --> Control Panel --> Appearance & Themes and then click the Display icon.

3. In the window, click the tab and then click Display Properties Settings Advanced.

4. Click the Monitor tab, and then click Properties --> Driver tab --> Update Driver.

5. When the Hardware Update Wizard dialog box appears, choose “Install the software automatically,” and click Next>

and the to complete the installation.Finish

6. Close the Display Properties window.

Microsoft

Windows

Millennium Operating System

To manually install or update the driver, perform the following steps:

Click .Start--> Settings--> Control Panel and then double-click Display

2. In the Display Properties window, click the tab, and then click Settings Advanced.

3. Click the Monitor tab, and then click Change--> Specify the location of the driver-->Next.

4. When the dialog box appears, select “Display a list of all the drivers in a specificUpdate Device Driver Wizard

location, so you can select the driver you want,” and click Next>.

5. Insert the monitor CD into the CD-ROM drive, then click Have Disk...

6. Type (change the drive letter to match your CD-ROM drive if it is not drive D) in the d:\ Copy manufacturer’s files

from: box, then click OK.

7. Click , Next> Next>, and then Finish to complete the installation.

8. Close the Display Properties window.

Microsoft

Windows

2000 Operating System

To manually install or update the driver, perform the following steps:

1. Click .Start--> Settings--> Control Panel and then double-click Display

2. In the Display Properties window, click the tab, and then click Settings Advanced.

3. Click the Monitor tab, and then click Properties--> Driver--> Update Driver.

4. When the dialog box appears, choose “Search for a suitable driver for my device,” andUpdate Device Driver Wizard

click .Next>

5. Insert the monitor CD into the CD-ROM drive, type (change the drive letter to match your CD-ROM drive if it is notd:\

drive D) in the Copy manufacturer’s files from: box, and click Next> and then Finish to complete the installation.

6. Close the Display Properties window.

Produktspecifikationer

Varumärke:	Dell
Kategori:	Övervaka
Modell:	P992
Enhetsplacering:	Vrijstaand
Typ av operation:	Touch
Inbyggd display:	Ja
Vikt:	55300 g
Bredd:	600 mm
Djup:	600 mm
Höjd:	845 mm
Nettoskatt:	2400 W
Antal platsinställningar:	14 couverts
Dörrfärg:	Roestvrijstaal
Sladdlängd:	1.75 m
Fördröjd starttimer:	Ja
Startfördröjning:	24 uur
Indikering av återstående tid:	Ja
Cykelns längd:	195 min
Ljudnivå:	40 dB
Energie-efficiëntieklasse:	E
Vattenförbrukning per cykel:	9.5 l
Nuvarande:	10 A
Bulleremissionsklass:	B
Antal tvättprogram:	8
Energiförbrukning per 100 cykler:	95 kWu
Produktstorlek:	Volledige grootte (60 cm)
LED-bakgrundsbelysning:	Ja
Saltindikator:	Ja
Sköljmedelsindikator:	Ja
AquaStop-funktion:	Ja
AquaSensor funktion:	Ja
Extra torr:	Ja
Glasskydd:	Ja
Belastningssensor:	Ja
Tvättprogram:	60min 65°C, Auto 45-65°C, Glass/delicate, Intensive, Night, Pre-rinse, Pre-wash, Quick, Silent
Energiförbrukning per cykel:	0.93 kWu
Avloppsslangens längd:	1.9 m
Vattentillförselslangens längd:	1.4 m
Övre korg justerbar höjd:	Ja
Strömförbrukning (när avstängd):	0.5 W
AC-ingångsspänning:	220-240 V
AC-ingångsfrekvens:	50 - 60 Hz
Type beeldscherm:	LED
Energieffektivitetsskala:	A tot G