Dell XPS 15 Bruksanvisning (108 Sidor)

XPS 15

XPS 15XPS 15

Service Manual

Service ManualService Manual

Computer Model: XPS 15–9560

Computer Model: XPS 15–9560Computer Model: XPS 15–9560

Regulatory Model: P56F

Regulatory Model: P56FRegulatory Model: P56F

Regulatory Type: P56F001

Regulatory Type: P56F001Regulatory Type: P56F001

Notes, cautions, and warnings

Notes, cautions, and warningsNotes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make

NOTE: A NOTE indicates important information that helps you make NOTE: A NOTE indicates important information that helps you make

better use of your product.

better use of your product.better use of your product.

CAUTION: A CAUTION indicates either potential damage to hardware or

CAUTION: A CAUTION indicates either potential damage to hardware or CAUTION: A CAUTION indicates either potential damage to hardware or

loss of data and tells you how to avoid the problem.

loss of data and tells you how to avoid the problem.loss of data and tells you how to avoid the problem.

WARNING: A WARNING indicates a potential for property damage,

WARNING: A WARNING indicates a potential for property damage, WARNING: A WARNING indicates a potential for property damage,

personal injury, or death.

personal injury, or death.personal injury, or death.

Copyright

trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be

trademarks of their respective owners.

2016–12

Rev. A00

Contents

ContentsContents

Before working inside your computer...........................

Before working inside your computer...........................Before working inside your computer........................... 10

10

1010

Before you begin .....................................................................................10

Safety instructions...................................................................................10

Recommended tools.................................................................................11

Screw list................................................................................................. 12

After working inside your computer..............................

After working inside your computer..............................After working inside your computer..............................14

14

1414

Removing the base cover.............................................

Removing the base cover.............................................Removing the base cover............................................. 15

15

1515

Procedure................................................................................................15

Replacing the base cover............................................. 18

Replacing the base cover............................................. 18Replacing the base cover............................................. 18

Procedure................................................................................................ 18

Removing the battery (half-length)..............................19

Removing the battery (half-length)..............................19Removing the battery (half-length)..............................19

Prerequisites............................................................................................19

Procedure................................................................................................19

Replacing the battery (half-length)..............................

Replacing the battery (half-length)..............................Replacing the battery (half-length).............................. 21

21

2121

Procedure................................................................................................ 21

Post-requisites.........................................................................................21

Removing the battery (full-length)..............................

Removing the battery (full-length)..............................Removing the battery (full-length).............................. 22

22

2222

Prerequisites........................................................................................... 22

Procedure............................................................................................... 22

3

Replacing the battery (full-length)..............................

Replacing the battery (full-length)..............................Replacing the battery (full-length).............................. 24

24

2424

Procedure............................................................................................... 24

Post-requisites........................................................................................ 24

Removing the hard drive..............................................

Removing the hard drive..............................................Removing the hard drive..............................................25

25

2525

Prerequisites........................................................................................... 25

Procedure............................................................................................... 25

Replacing the hard drive..............................................

Replacing the hard drive..............................................Replacing the hard drive.............................................. 30

30

3030

Procedure............................................................................................... 30

Post-requisites........................................................................................30

Removing the solid-state drive (half-length)................

Removing the solid-state drive (half-length)................Removing the solid-state drive (half-length)................31

31

3131

Prerequisites............................................................................................ 31

Procedure................................................................................................ 31

Replacing the solid-state drive (half-length)............... 34

Replacing the solid-state drive (half-length)............... 34Replacing the solid-state drive (half-length)............... 34

Procedure............................................................................................... 34

Post-requisites........................................................................................ 34

Removing the solid-state drive (full-length)................

Removing the solid-state drive (full-length)................Removing the solid-state drive (full-length)................ 35

35

3535

Prerequisites........................................................................................... 35

Procedure............................................................................................... 35

Replacing the solid-state drive (full-length).................38

Replacing the solid-state drive (full-length).................38Replacing the solid-state drive (full-length).................38

Procedure............................................................................................... 38

Post-requisites........................................................................................38

Removing the speakers................................................

Removing the speakers................................................Removing the speakers................................................39

39

3939

Prerequisites........................................................................................... 39

Procedure............................................................................................... 39

4

Replacing the speakers.................................................

Replacing the speakers.................................................Replacing the speakers.................................................41

41

4141

Procedure................................................................................................ 41

Post-requisites.........................................................................................41

Removing the wireless card.........................................

Removing the wireless card.........................................Removing the wireless card......................................... 42

42

4242

Prerequisites........................................................................................... 42

Procedure............................................................................................... 42

Replacing the wireless card......................................... 44

Replacing the wireless card......................................... 44Replacing the wireless card......................................... 44

Procedure............................................................................................... 44

Post-requisites........................................................................................45

Removing the fans.......................................................

Removing the fans.......................................................Removing the fans....................................................... 46

46

4646

Prerequisites........................................................................................... 46

Procedure............................................................................................... 46

Replacing the fans.......................................................

Replacing the fans.......................................................Replacing the fans....................................................... 49

49

4949

Procedure............................................................................................... 49

Post-requisites........................................................................................49

Removing the heat-sink assembly............................... 50

Removing the heat-sink assembly............................... 50Removing the heat-sink assembly............................... 50

Prerequisites........................................................................................... 50

Procedure............................................................................................... 50

Replacing the heat-sink assembly................................

Replacing the heat-sink assembly................................Replacing the heat-sink assembly................................52

52

5252

Procedure............................................................................................... 52

Post-requisites........................................................................................52

Removing the memory modules...................................

Removing the memory modules...................................Removing the memory modules................................... 53

53

5353

Prerequisites........................................................................................... 53

Procedure............................................................................................... 53

5

Replacing the memory modules...................................

Replacing the memory modules...................................Replacing the memory modules................................... 55

55

5555

Procedure............................................................................................... 55

Post-requisites........................................................................................56

Removing the system board........................................

Removing the system board........................................Removing the system board........................................ 58

58

5858

Prerequisites........................................................................................... 58

Procedure............................................................................................... 59

Replacing the system board.........................................

Replacing the system board.........................................Replacing the system board.........................................62

62

6262

Procedure............................................................................................... 62

Post-requisites........................................................................................62

Removing the audio daughter-board............................

Removing the audio daughter-board............................Removing the audio daughter-board............................64

64

6464

Prerequisites........................................................................................... 64

Procedure............................................................................................... 64

Replacing the audio daughter-board............................

Replacing the audio daughter-board............................Replacing the audio daughter-board............................ 66

66

6666

Procedure............................................................................................... 66

Post-requisites........................................................................................66

Removing the coin-cell battery....................................

Removing the coin-cell battery....................................Removing the coin-cell battery.................................... 67

67

6767

Prerequisites........................................................................................... 67

Procedure............................................................................................... 67

Replacing the coin-cell battery....................................

Replacing the coin-cell battery....................................Replacing the coin-cell battery.................................... 69

69

6969

Procedure............................................................................................... 69

Post-requisites........................................................................................69

Removing the keyboard...............................................

Removing the keyboard...............................................Removing the keyboard............................................... 70

70

7070

Prerequisites........................................................................................... 70

Procedure............................................................................................... 70

6

Replacing the keyboard................................................73

Replacing the keyboard................................................73Replacing the keyboard................................................73

Procedure............................................................................................... 73

Post-requisites........................................................................................ 73

Removing the display assembly....................................

Removing the display assembly....................................Removing the display assembly....................................74

74

7474

Prerequisites........................................................................................... 74

Procedure............................................................................................... 74

Replacing the display assembly....................................

Replacing the display assembly....................................Replacing the display assembly....................................78

78

7878

Procedure............................................................................................... 78

Post-requisites........................................................................................ 78

Removing the power-adapter port...............................

Removing the power-adapter port...............................Removing the power-adapter port............................... 79

79

7979

Prerequisites........................................................................................... 79

Procedure............................................................................................... 79

Replacing the power-adapter port................................

Replacing the power-adapter port................................Replacing the power-adapter port................................81

81

8181

Procedure................................................................................................ 81

Post-requisites.........................................................................................81

Removing the antenna cover.......................................

Removing the antenna cover.......................................Removing the antenna cover....................................... 82

82

8282

Prerequisites........................................................................................... 82

Procedure............................................................................................... 83

Replacing the antenna cover....................................... 85

Replacing the antenna cover....................................... 85Replacing the antenna cover....................................... 85

Procedure............................................................................................... 85

Post-requisites........................................................................................85

Removing the display hinges........................................

Removing the display hinges........................................Removing the display hinges........................................86

86

8686

Prerequisites........................................................................................... 86

Procedure............................................................................................... 87

7

Replacing the display hinges........................................

Replacing the display hinges........................................Replacing the display hinges........................................ 89

89

8989

Procedure............................................................................................... 89

Post-requisites........................................................................................89

Removing the antenna module.....................................

Removing the antenna module.....................................Removing the antenna module.....................................90

90

9090

Prerequisites........................................................................................... 90

Procedure............................................................................................... 90

Replacing the antenna module.....................................

Replacing the antenna module.....................................Replacing the antenna module..................................... 92

92

9292

Procedure............................................................................................... 92

Post-requisites........................................................................................92

Removing the palm-rest assembly...............................

Removing the palm-rest assembly...............................Removing the palm-rest assembly............................... 93

93

9393

Prerequisites........................................................................................... 93

Procedure............................................................................................... 93

Replacing the palm-rest assembly...............................

Replacing the palm-rest assembly...............................Replacing the palm-rest assembly............................... 95

95

9595

Procedure............................................................................................... 95

Post-requisites........................................................................................95

BIOS overview.............................................................

BIOS overview.............................................................BIOS overview.............................................................96

96

9696

Entering the BIOS setup program........................................................... 96

Timing key sequences............................................................................. 96

System setup options............................................................................. 96

Clearing CMOS settings........................................................................ 103

Flashing the BIOS.................................................................................. 104

Boot menu.............................................................................................104

Boot menu enhancements.....................................................................104

Diagnostics.................................................................105

Diagnostics.................................................................105Diagnostics.................................................................105

8

Getting help and contacting Dell.................................107

Getting help and contacting Dell.................................107Getting help and contacting Dell.................................107

Self-help resources................................................................................107

Contacting Dell...................................................................................... 107

9

Before working inside your

Before working inside your Before working inside your

computer

computercomputer

NOTE: The images in this document may differ from your computer

NOTE: The images in this document may differ from your computer NOTE: The images in this document may differ from your computer

depending on the configuration you ordered.

depending on the configuration you ordered.depending on the configuration you ordered.

Before you begin

Before you begin Before you begin

1

1 1 Save and close all open files and exit all open applications.

2

2 2 Start

Start

Start Start Power

Power

Power Power Shut down

Shut down

Shut downShut downShut down your computer. Click → → .

NOTE: If you are using a different operating system, see the

NOTE: If you are using a different operating system, see the NOTE: If you are using a different operating system, see the

documentation of your operating system for shut-down instructions.

documentation of your operating system for shut-down instructions.documentation of your operating system for shut-down instructions.

3

3 3 Disconnect your computer and all attached devices from their electrical outlets.

4

4 4 Disconnect all attached network devices and peripherals, such as keyboard,

mouse, and monitor from your computer.

5

5 5 Remove any media card and optical disc from your computer, if applicable.

6

6 6 Close the display and turn the computer over.

Safety instructions

Safety instructionsSafety instructions

Use the following safety guidelines to protect your computer from potential damage

and ensure your personal safety.

WARNING: Before working inside your computer, read the safety

WARNING: Before working inside your computer, read the safety WARNING: Before working inside your computer, read the safety

information that shipped with your computer. For more safety best

information that shipped with your computer. For more safety best information that shipped with your computer. For more safety best

practices, see the Regulatory Compliance home page at

practices, see the Regulatory Compliance home page at practices, see the Regulatory Compliance home page at www.dell.com/

www.dell.com/

www.dell.com/www.dell.com/

regulatory_compliance

regulatory_complianceregulatory_compliance.

.

..

WARNING: Disconnect all power sources before opening the computer

WARNING: Disconnect all power sources before opening the computer WARNING: Disconnect all power sources before opening the computer

cover or panels. After you finish working inside the computer, replace all

cover or panels. After you finish working inside the computer, replace all cover or panels. After you finish working inside the computer, replace all

covers, panels, and screws before connecting to the electrical outlet.

covers, panels, and screws before connecting to the electrical outlet.covers, panels, and screws before connecting to the electrical outlet.

CAUTION: To avoid damaging the computer, ensure that the work surface

CAUTION: To avoid damaging the computer, ensure that the work surface CAUTION: To avoid damaging the computer, ensure that the work surface

is flat and clean.

is flat and clean.is flat and clean.

10

Screw list

Screw listScrew list

The following table provides the list of screws that are used for securing different

components to the computer.

Table 1. Screw list

Table 1. Screw listTable 1. Screw list

Component

ComponentComponent Secured to

Secured to

Secured toSecured to Screw type

Screw type

Screw typeScrew type Quantity

Quantity

QuantityQuantity Screw image

Screw image

Screw imageScrew image

Base cover Palm-rest

assembly

M2x3 T5 10

System badge Palm-rest

assembly

M2x8 2

Battery (half-

length)

Palm-rest

assembly

M2x4 4

Battery (full-

length)

Palm-rest

assembly

M2x4 7

Hard-drive

cage

Hard-drive

assembly

M2x4 4

Solid-state

drive (half-

length)

System board M2x3 1

Solid-state

drive

Solid-state

drive bracket

M2x2 1

Solid-state

drive (full-

length)

System board M2x3 1

Speakers Palm-rest

assembly

M2x2 4

Fan System board M2x4 4

12

Component

ComponentComponent Secured to

Secured to

Secured toSecured to Screw type

Screw type

Screw typeScrew type Quantity

Quantity

QuantityQuantity Screw image

Screw image

Screw imageScrew image

Heat-sink

assembly

System board M2x3 5/4

Display-cable

bracket

System board M2x2 1

System board Palm-rest

assembly

M2x4 5

Audio

daughter-

board

System board M2x3 2

Keyboard Palm-rest

assembly

M1.6x1.5 31

Display hinges Palm-rest

assembly

M2.5x5 6

Power-adapter

port

Palm-rest

assembly

M2x3 1

Antenna

module

Display

assembly

M2x4 4

13

After working inside your

After working inside your After working inside your

computer

computercomputer

CAUTION: Leaving stray or loose screws inside your computer may severely

CAUTION: Leaving stray or loose screws inside your computer may severely CAUTION: Leaving stray or loose screws inside your computer may severely

damage your computer.

damage your computer.damage your computer.

1

1 1 Replace all screws and ensure that no stray screws remain inside your computer.

2

2 2 Connect any external devices, peripherals, or cables you removed before

working on your computer.

3

3 3 Replace any media cards, discs, or any other parts that you removed before

working on your computer.

4

4 4 Connect your computer and all attached devices to their electrical outlets.

5

5 5 Turn on your computer.

14

Removing the base cover

Removing the base coverRemoving the base cover

WARNING: Before working inside your computer, read the safety

WARNING: Before working inside your computer, read the safety WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

information that shipped with your computer and follow the steps in information that shipped with your computer and follow the steps in Before

Before

Before Before

working inside your computer

working inside your computerworking inside your computer. After working inside your computer, follow

. After working inside your computer, follow

. After working inside your computer, follow . After working inside your computer, follow

the instructions in

the instructions in the instructions in . For more safety best

. For more safety best

. For more safety best . For more safety best

After working inside your computer

After working inside your computerAfter working inside your computer

practices, see the Regulatory Compliance home page at

practices, see the Regulatory Compliance home page at practices, see the Regulatory Compliance home page at www.dell.com/

www.dell.com/

www.dell.com/www.dell.com/

regulatory_compliance

regulatory_complianceregulatory_compliance.

.

..

Procedure

ProcedureProcedure

1

1 1 Close the display, and turn the computer over.

2

2 2 Turn the system badge over and remove the two screws (M2x8) that secure

the base cover to the palm-rest assembly.

15

Replacing the base cover

Replacing the base coverReplacing the base cover

WARNING: Before working inside your computer, read the safety

WARNING: Before working inside your computer, read the safety WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

information that shipped with your computer and follow the steps in information that shipped with your computer and follow the steps in Before

Before

Before Before

working inside your computer

working inside your computerworking inside your computer. After working inside your computer, follow

. After working inside your computer, follow

. After working inside your computer, follow . After working inside your computer, follow

the instructions in

the instructions in the instructions in . For more safety best

. For more safety best

. For more safety best . For more safety best

After working inside your computer

After working inside your computerAfter working inside your computer

practices, see the Regulatory Compliance home page at

practices, see the Regulatory Compliance home page at practices, see the Regulatory Compliance home page at www.dell.com/

www.dell.com/

www.dell.com/www.dell.com/

regulatory_compliance

regulatory_complianceregulatory_compliance.

.

..

Procedure

ProcedureProcedure

1

1 1 Place the base cover on the palm-rest assembly and snap it into place.

2

2 2 Replace the 10 screws (M2x3 T5) that secure the base cover to the palm-rest

assembly.

3

3 3 Replace the two screws (M2x8) that secure the base cover to the palm-rest

assembly.

4

4 4 Turn the system badge over, and snap it into place.

5

5 5 Turn the computer over.

18

Removing the battery (half-

Removing the battery (half-Removing the battery (half-

length)

length)length)

WARNING: Before working inside your computer, read the safety

WARNING: Before working inside your computer, read the safety WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

information that shipped with your computer and follow the steps in information that shipped with your computer and follow the steps in Before

Before

Before Before

working inside your computer

working inside your computerworking inside your computer. After working inside your computer, follow

. After working inside your computer, follow

. After working inside your computer, follow . After working inside your computer, follow

the instructions in

the instructions in the instructions in . For more safety best

. For more safety best

. For more safety best . For more safety best

After working inside your computer

After working inside your computerAfter working inside your computer

practices, see the Regulatory Compliance home page at

practices, see the Regulatory Compliance home page at practices, see the Regulatory Compliance home page at www.dell.com/

www.dell.com/

www.dell.com/www.dell.com/

regulatory_compliance

regulatory_complianceregulatory_compliance.

.

..

Prerequisites

PrerequisitesPrerequisites

Remove the .base cover

Procedure

ProcedureProcedure

1

1 1 Remove the four screws (M2x4) that secure the battery to the palm-rest

assembly.

2

2 2 Disconnect the battery cable from the system board.

19

3

3 3 Lift the battery off the palm-rest assembly.

Figure 3. Removing the battery

Figure 3. Removing the batteryFigure 3. Removing the battery

1 battery cable 2 screws (4)

3 battery 4 palm-rest assembly

4

4 4 Turn the computer over, open the display, and press the power button for five

seconds to ground the system board.

20

Replacing the battery (half-

Replacing the battery (half-Replacing the battery (half-

length)

length)length)

WARNING: Before working inside your computer, read the safety

WARNING: Before working inside your computer, read the safety WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

information that shipped with your computer and follow the steps in information that shipped with your computer and follow the steps in Before

Before

Before Before

working inside your computer

working inside your computerworking inside your computer. After working inside your computer, follow

. After working inside your computer, follow

. After working inside your computer, follow . After working inside your computer, follow

the instructions in

the instructions in the instructions in . For more safety best

. For more safety best

. For more safety best . For more safety best

After working inside your computer

After working inside your computerAfter working inside your computer

practices, see the Regulatory Compliance home page at

practices, see the Regulatory Compliance home page at practices, see the Regulatory Compliance home page at www.dell.com/

www.dell.com/

www.dell.com/www.dell.com/

regulatory_compliance

regulatory_complianceregulatory_compliance.

.

..

Procedure

ProcedureProcedure

1

1 1 Align the screw holes on the battery with the screw holes on the palm-rest

assembly.

2

2 2 Replace the four screws (M2x4) that secure the battery to the palm-rest

assembly.

3

3 3 Connect the battery cable to the system board.

Post-requisites

Post-requisitesPost-requisites

Replace the .base cover

21

Removing the battery (full-

Removing the battery (full-Removing the battery (full-

length)

length)length)

WARNING: Before working inside your computer, read the safety

WARNING: Before working inside your computer, read the safety WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

information that shipped with your computer and follow the steps in information that shipped with your computer and follow the steps in Before

Before

Before Before

working inside your computer

working inside your computerworking inside your computer. After working inside your computer, follow

. After working inside your computer, follow

. After working inside your computer, follow . After working inside your computer, follow

the instructions in

the instructions in the instructions in . For more safety best

. For more safety best

. For more safety best . For more safety best

After working inside your computer

After working inside your computerAfter working inside your computer

practices, see the Regulatory Compliance home page at

practices, see the Regulatory Compliance home page at practices, see the Regulatory Compliance home page at www.dell.com/

www.dell.com/

www.dell.com/www.dell.com/

regulatory_compliance

regulatory_complianceregulatory_compliance.

.

..

Prerequisites

PrerequisitesPrerequisites

Remove the .base cover

Procedure

ProcedureProcedure

1

1 1 Remove the seven screws (M2x4) that secure the battery to the palm-rest

assembly.

2

2 2 Disconnect the battery cable from the system board.

22

Replacing the battery (full-

Replacing the battery (full-Replacing the battery (full-

length)

length)length)

WARNING: Before working inside your computer, read the safety

WARNING: Before working inside your computer, read the safety WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

information that shipped with your computer and follow the steps in information that shipped with your computer and follow the steps in Before

Before

Before Before

working inside your computer

working inside your computerworking inside your computer. After working inside your computer, follow

. After working inside your computer, follow

. After working inside your computer, follow . After working inside your computer, follow

the instructions in

the instructions in the instructions in . For more safety best

. For more safety best

. For more safety best . For more safety best

After working inside your computer

After working inside your computerAfter working inside your computer

practices, see the Regulatory Compliance home page at

practices, see the Regulatory Compliance home page at practices, see the Regulatory Compliance home page at www.dell.com/

www.dell.com/

www.dell.com/www.dell.com/

regulatory_compliance

regulatory_complianceregulatory_compliance.

.

..

Procedure

ProcedureProcedure

1

1 1 Align the screw holes on the battery with the screw holes on the palm-rest

assembly.

2

2 2 Replace the seven screws (M2x4) that secure the battery to the palm-rest

assembly.

3

3 3 Connect the battery cable to the system board.

Post-requisites

Post-requisitesPost-requisites

Replace the .base cover

24

Removing the hard drive

Removing the hard driveRemoving the hard drive

WARNING: Before working inside your computer, read the safety

WARNING: Before working inside your computer, read the safety WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

information that shipped with your computer and follow the steps in information that shipped with your computer and follow the steps in Before

Before

Before Before

working inside your computer

working inside your computerworking inside your computer. After working inside your computer, follow

. After working inside your computer, follow

. After working inside your computer, follow . After working inside your computer, follow

the instructions in

the instructions in the instructions in . For more safety best

. For more safety best

. For more safety best . For more safety best

After working inside your computer

After working inside your computerAfter working inside your computer

practices, see the Regulatory Compliance home page at

practices, see the Regulatory Compliance home page at practices, see the Regulatory Compliance home page at www.dell.com/

www.dell.com/

www.dell.com/www.dell.com/

regulatory_compliance

regulatory_complianceregulatory_compliance.

.

..

CAUTION: Hard drives are fragile. Exercise care when handling the hard

CAUTION: Hard drives are fragile. Exercise care when handling the hard CAUTION: Hard drives are fragile. Exercise care when handling the hard

drive.

drive.drive.

CAUTION: To avoid data loss, do not remove the hard drive while the

CAUTION: To avoid data loss, do not remove the hard drive while the CAUTION: To avoid data loss, do not remove the hard drive while the

computer is in sleep or on state.

computer is in sleep or on state.computer is in sleep or on state.

Prerequisites

PrerequisitesPrerequisites

1

1 1 Remove the .base cover

2

2 2 Remove the or the .battery (half-length) battery (full-length)

Procedure

ProcedureProcedure

1

1 1 Remove the four screws (M2x4) that secure the hard-drive cage to the palm-

rest assembly.

25

2

2 2 Lift the hard-drive cage off the hard-drive assembly.

Figure 5. Removing the hard-drive cage

Figure 5. Removing the hard-drive cageFigure 5. Removing the hard-drive cage

1 screws (4) 2 hard-drive cage

3 hard-drive assembly

3

3 3 Using the pull tab disconnect the hard-drive cable from the system board.

26

4

4 4 Lift the hard-drive assembly off the palm-rest assembly.

Figure 6. Disconnecting the hard-drive cable from the system board

Figure 6. Disconnecting the hard-drive cable from the system boardFigure 6. Disconnecting the hard-drive cable from the system board

1 pull tab 2 hard-drive assembly

27

2

2 2 Lift and slide the solid-state drive assembly from the system board.

Figure 9. Removing the solid-state drive assembly

Figure 9. Removing the solid-state drive assemblyFigure 9. Removing the solid-state drive assembly

1 screw 2 solid-state drive assembly

3 solid-state drive slot 4 system board

32

3

3 3 Turn the solid-state drive assembly over, then remove the screw (M2x2) that

secures the solid-state drive to the solid-state drive bracket.

Figure 10. Removing the solid-state drive bracket

Figure 10. Removing the solid-state drive bracketFigure 10. Removing the solid-state drive bracket

1 solid-state drive bracket 2 screw

3 solid-state drive

4

4 4 Lift the solid-state drive off the solid-state drive bracket.

33

Removing the solid-state drive

Removing the solid-state drive Removing the solid-state drive

(full-length)

(full-length)(full-length)

WARNING: Before working inside your computer, read the safety

WARNING: Before working inside your computer, read the safety WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

information that shipped with your computer and follow the steps in information that shipped with your computer and follow the steps in Before

Before

Before Before

working inside your computer

working inside your computerworking inside your computer. After working inside your computer, follow

. After working inside your computer, follow

. After working inside your computer, follow . After working inside your computer, follow

the instructions in

the instructions in the instructions in . For more safety best

. For more safety best

. For more safety best . For more safety best

After working inside your computer

After working inside your computerAfter working inside your computer

practices, see the Regulatory Compliance home page at

practices, see the Regulatory Compliance home page at practices, see the Regulatory Compliance home page at www.dell.com/

www.dell.com/

www.dell.com/www.dell.com/

regulatory_compliance

regulatory_complianceregulatory_compliance.

.

..

Prerequisites

PrerequisitesPrerequisites

1

1 1 Remove the .base cover

2

2 2 Remove the or the .battery (half-length) battery (full-length)

Procedure

ProcedureProcedure

1

1 1 Remove the screw (M2x3) that secures the solid-state drive to the system

board.

35

4

4 4 Slide and remove the wireless card out of the wireless-card slot.

Figure 14. Removing the wireless card

Figure 14. Removing the wireless cardFigure 14. Removing the wireless card

1 captive screw 2 wireless-card bracket

3 wireless card 4 antenna cables (2)

43

Removing the fans

Removing the fansRemoving the fans

WARNING: Before working inside your computer, read the safety

WARNING: Before working inside your computer, read the safety WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

information that shipped with your computer and follow the steps in information that shipped with your computer and follow the steps in Before

Before

Before Before

working inside your computer

working inside your computerworking inside your computer. After working inside your computer, follow

. After working inside your computer, follow

. After working inside your computer, follow . After working inside your computer, follow

the instructions in

the instructions in the instructions in . For more safety best

. For more safety best

. For more safety best . For more safety best

After working inside your computer

After working inside your computerAfter working inside your computer

practices, see the Regulatory Compliance home page at

practices, see the Regulatory Compliance home page at practices, see the Regulatory Compliance home page at www.dell.com/

www.dell.com/

www.dell.com/www.dell.com/

regulatory_compliance

regulatory_complianceregulatory_compliance.

.

..

Prerequisites

PrerequisitesPrerequisites

1

1 1 Remove the .base cover

2

2 2 Remove the or the .battery (half-length) battery (full-length)

Procedure

ProcedureProcedure

NOTE: The touch-screen cable is available only on laptop configurations

NOTE: The touch-screen cable is available only on laptop configurations NOTE: The touch-screen cable is available only on laptop configurations

with touch displays.

with touch displays.with touch displays.

1

1 1 Remove the two screws (M2x4) that secure the video fan (JFAN_2) to the

system board.

2

2 2 Disconnect the touch-screen cable from the system board.

3

3 3 Peel off the tape that secures the touch-screen cable to the video fan

(JFAN_2).

4

4 4 Note the routing of the touch-screen cable and remove the cable from the

routing guides on the video fan (JFAN_2).

5

5 5 Disconnect the video fan (JFAN_2) cable from the system board.

46

2

2 2 Slide and remove the memory module from the memory-module slot.

Figure 19. Removing the memory modules

Figure 19. Removing the memory modulesFigure 19. Removing the memory modules

1 memory module 2 securing clips (2)

3 memory-module slot

54

Varumärke:	Dell
Kategori:	Laptop
Modell:	XPS 15
Färg på produkten:	Marineblauw
Vikt:	2300 g
Bredd:	203 mm
Djup:	259.3 mm
Höjd:	191.5 mm
Husmaterial:	Kunststof
Färg:	Nee
LED-indikatorer:	Ja
Typ av förpackning:	Doos
Beeldscherm:	TFT
Skärm diagonal:	2.3 "
Upplösning:	320 x 240 Pixels
USB uttag:	Ja
Anslutningsteknik:	Bedraad
Ethernet LAN:	Ja
Medföljande kablar:	DC
Snabbstartsguide:	Ja
Antal USB 2.0-portar:	1
Certifiering:	FCC Class B, CE Class B, C-Tick Class B, UL, cUL, TÜV/safety, CCC, CoC-Mexico
Internminne:	64 MB
RS-232 port:	1
Hållbarhetscertifikat:	ENERGY STAR
Typ processor:	Ja
Antal per paket:	1 stuk(s)
Inkluderad programvara:	Windows labeling
Stöder Windows:	Ja
Förvaringstemperatur:	-40 - 60 °C
Klockfunktion:	Ja
Stöder Mac-operativsystem:	Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave
Förvaringsfuktighet:	10 - 90 procent
AC-adapter, utspänning:	2.5 V
AC-adapter, utström:	3.75 A
Stöder Linux:	Ja
Flashminne:	128 MB
Maximal-upplösning:	203 x 203 DPI
Skriv ut färger:	Zwart
Mediadikte:	0.06 - 0.19 mm
Maximal rulldiameter:	127 mm
Utskriftsteknik:	Thermo transfer
Sidbeskrivningsspråk:	TSPL-EZ
Valfri anslutning:	Bluetooth, Wireless LAN
Genomsnittlig strömförbrukning under utskrift:	90 W
Färgskärm:	Ja
Inbyggda streckkoder:	Code 11, Code 128 (A/B/C), Code 39, Code 49, Code 93, Code-128 Codabar Library, EAN128, EAN13, EAN8, ITF-14, POSTNET, UPC-A, UPC-E
Maximal utskriftsbredd:	108 mm
Utskriftshastighet (metrisk):	152 mm/sec
Maximal utskriftshöjd:	- mm
Maximal etikettbredd:	108 mm
Parallellport(ar):	1
Wifi:	Nee
AC-ingångsspänning:	100- 240 V
AC-ingångsfrekvens:	50 - 60 Hz
Drifttemperatur (TT):	5 - 40 °C
Relativ luftfuktighet i drift (VV):	25 - 85 procent
Maximal etikettlängd:	2.2 m
Kärndiameter:	38.1 mm
Antal-teckensnitt:	8
Bandets bredd:	40 mm
Band-fjäder:	110 m
Minsta utskriftslängd:	2286 mm
Roterande tryck:	Ja

Dell XPS 15 Bruksanvisning

Produktspecifikationer

Behöver du hjälp?

Laptop Dell Manualer

Laptop Manualer

Nyaste Laptop Manualer