Delonghi ICM15210.1 Bruksanvisning

Delonghi kaffebryggare ICM15210.1

Läs nedan 📖 manual på svenska för Delonghi ICM15210.1 (32 sidor) i kategorin kaffebryggare. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/32

AVN-GMC

IEEE1588 PTP Grandmaster Clock

with GPS Receiver

HANDBOOK

Manufacturers of Audio Products for AV,

Installed Sound, Broadcast Radio & Broadcast TV

AVN-GMC Handbook

This handbook is for use with the following product:

IEEE1588 PTP Grandmaster Clock with GPS Receiver

AW10735, Stock Code: 30-294

Revision 1.17, September 2022

©Sonifex Ltd, 2022

Sonifex Ltd, 61, Station Road, Irthlingborough,

Northants, NN9 5QE, England.

Tel: +44 (0)1933 650 700

Fax: +44 (0)1933 650 726

Email: sales@sonifex.co.uk

Website: https://www.sonifex.co.uk

Information in this document is subject to change without notice and does not represent a

commitment on the part of the vendor. Sonifex Ltd shall not be liable for any loss or damage

whatsoever arising from the use of information or any error contained in this manual.

No part of this manual may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, recording, information storage and retrieval systems, for any

purpose other than the purchaser’s personal use, without the express written permission of Sonifex

Ltd. Unless otherwise noted, all names of companies, products and persons contained herein are

part of a completely fictitious adaptation and are designed solely to document the use of Sonifex

product.

Made in the UK by

For the latest Sonifex handbook information please visit the

Sonifex website at www.sonifex.co.uk

Contents

Product Warranty - 2 Year Extended i

Sonifex Warranty & Liability Terms & Conditions i

1. Definitions i

2. Warranty i

Unpacking Your Product ii

Repairs & Returns iii

CE/UKCA Conformity iii

Safety & Installation of Mains Operated Equipment iii

Voltage Setting Checks iii

Power Cable & Connection iii

WEEE Directive iv

Atmosphere/Environment iv

1. AVN-GMC IEEE1588 PTP Grandmaster Clock with

GPS Receiver 1

Introduction 1

Front Panel Display & Indicators 2

Front Panel Indicators 2

Display & Spinwheel 3

Power Button 3

GPS Operation 3

Rear Panel Connectors 4

Front Panel Menu Navigation 5

AVN-GMC Menu Tree 6

2. Webserver & Unit Discovery 8

Bonjour Network Discovery 8

Standard Webpage Layout 9

Status Page 10

Status Indication 10

Device Status 11

Webpage Parameter Details - Device Information

Contents & Figures

Contents Figurescontinued…

Device Information 12

Network Information 12

GPS Satellite Information 12

Network Settings 13

PTP Profiles 14

PTP Profiles 15

Device Settings 16

Time Settings 17

Misc Settings 18

Auto Save on Page Exit 18

Factory Defaults 18

System 19

Update Firmware 19

3. Grandmaster Clocks, AVN, RAVENNA & AES67 20

4. Technical Specification For AVN-GMC 21

Fig 1-1: The AVN-GMC Front Panel 1

Fig 1-2: Front Panel Indicators 2

Fig 1-3: Display & Spinwheel 3

Fig 1-4: Default Screen Display 3

Fig 1-5: AVN-GMC Rear Panel 4

Fig 1-6: AVN-GMC Menu Tree (V2.1) 7

Fig 2-1: Standard Webpage Layout 9

Fig 2-2: AVN-GMC Status Screen 10

Fig 2-3: AVN-GMC Device Information Screen 12

Fig 2-4: AVN-GMC Network Settings Screen 13

Fig 2-5: AVN-GMC PTP Profile Screen 14

Fig 2-6: AVN-GMC Device Settings Screen 16

Fig 2-7: AVN-GMC Time Settings Screen 17

Fig 2-8: AVN-GMC Misc Settings Screen 18

Fig 2-9: AVN-GMC System Screen 19

Warranty Registration

Sonifex Limi ted 61 S tatio n Roa d Irthl ingb orough Nort hamptonsh ire NN9 5QE United Kingd om● ● ● ● ●

Tel : +44 (0)1933 6 50 7 00 Fax: +44 ( 0)1933 650 72 6 Em ail: technical.support@soni fex .co. uk Intern et: ww w.s onifex. co.uk● ● ●

Extended 2 Year Warranty

As standard, Sonifex products are

supplied with a 1 year back to base

warranty.

If you register the product online, you

can increase your product warranty to 2

years and we can also keep you

informed of any product design

improvements or modifications.

To register your product, please go online to www.sonifex.co.uk/register

Product:

Serial No:

Warranty

Product Warranty - 2 Year Extended

As standard, Sonifex products are supplied with a 1 year back to base

warranty. In order to register the date of purchase and so that we can keep

you informed of any product design improvements or modifications, it is

important to complete the warranty registration online. Additionally, if you

warranty to 2 years. Go to the Sonifex website at: www.sonifex.co.uk/

Note: For your own records the product serial number is recorded on the

CE certification page of this handbook.

Sonifex Warranty & Liability Terms & Conditions

1. Definitions

‘the Company’ means Sonifex Ltd and where relevant includes companies

within the same group of companies as Sonifex Limited.

‘the Goods’ means the goods or any part thereof supplied by the Company

and where relevant includes: work carried out by the Company on items

supplied by the Purchaser; services supplied by the Company; and software

supplied by the Company.

‘the Purchaser’ means the person or organisation who buys or has agreed

to buy the Goods.

‘the Price’ means the Price of the Goods and any other charges incurred by

the Company in the supply of the Goods.

‘the Warranty Term’ is the length of the product warranty which is usually

12 months from the date of despatch; except when the product has been

registered at the Sonifex website when the Warranty Term is 24 months

from the date of despatch.

‘the Contract’ means the quotation, these Conditions of Sale and any other

document incorporated in a contract between the Company and the

Purchaser.

This is the entire Contract between the parties relating to the subject

matter hereof and may not be changed or terminated except in writing in

accordance with the provisions of this Contract. A reference to the consent,

acknowledgement, authority or agreement of the Company means in

writing and only by a director of the Company.

2. Warranty

a. The Company agrees to repair or (at its discretion) replace Goods

which are found to be defective (fair wear and tear excepted) and

which are returned to the Company within the Warranty Term

provided that each of the following are satisfied:

i. notification of any defect is given to the Company immediately

upon its becoming apparent to the Purchaser;

ii. the Goods have only been operated under normal operating

conditions and have only been subject to normal use (and in

particular the Goods must have been correctly connected and

must not have been subject to high voltage or to ionising

radiation and must not have been used contrary to the

Company’s technical recommendations);

iii. the Goods are returned to the Company’s premises at the

Purchaser’s expense;

iv. any Goods or parts of Goods replaced shall become the

property of the Company;

v. no work whatsoever (other than normal and proper

maintenance) has been carried out to the Goods or any part of

the Goods without the Company’s prior written consent;

Warranty

vi. the defect has not arisen from a design made, furnished or

specified by the Purchaser;

vii. the Goods have been assembled or incorporated into other

goods only in accordance with any instructions issued by the

Company;

viii. the defect has not arisen from a design modified by the

Purchaser;

ix. the defect has not arisen from an item manufactured by a

person other than the Company. In respect of any item

manufactured by a person other than the Company, the

Purchaser shall only be entitled to the benefit of any warranty or

guarantee provided by such manufacturer to the Company.

b. In respect of computer software supplied by the Company the

Company does not warrant that the use of the software will be

uninterrupted or error free.

c. The Company accepts liability:

(i) for death or personal injury to the extent that it results from the

negligence of the Company, its employees (whilst in the course

of their employment) or its agents (in the course of the agency);

(ii) for any breach by the Company of any statutory undertaking as

to title, quiet possession and freedom from encumbrance.

d. Subject to conditions (a) and (c) from the time of despatch of the

Goods from the Company’s premises the Purchaser shall be

responsible for any defect in the Goods or loss, damage, nuisance or

interference whatsoever consequential economic or otherwise or

wastage of material resulting from or caused by or to the Goods. In

particular the Company shall not be liable for any loss of profits or

other economic losses. The Company accordingly excludes all liability

for the same.

e. At the request and expense of the Purchaser the Company will test

the Goods to ascertain performance levels and provide a report of

the results of that test. The report will be accurate at the time of the

test, to the best of the belief and knowledge of the Company, and the

Company accepts no liability in respect of its accuracy beyond that

set out in Condition (a).

f. Subject to Condition (e) no representation, condition, warranty or

other term, express or implied (by statute or otherwise) is given by

the Company that the Goods are of any particular quality or standard

or will enable the Purchaser to attain any particular performance or

result, or will be suitable for any particular purpose or use under

specific conditions or will provide any particular capacity,

notwithstanding that the requirement for such performance, result or

capacity or that such particular purpose or conditions may have been

known (or ought to have been known) to the Company, its employees

or agents.

g. (i) To the extent that the Company is held legally liable to the

Purchaser for any single breach of contract, tort, representation

or other act or default, the

Company’s liability for the same shall not

exceed the price of the Goods.

(ii) The restriction of liability in Condition (g)(i) shall not apply to

any liability accepted by the Seller in Condition (c).

h. Where the Goods are sold under a consumer transaction (as defined

by the Consumer Transactions (Restrictions on Statements) Order

1976) the statutory rights of the Purchaser are not affected by these

Conditions of Sale.

Unpacking Your Product

Each product is shipped in protective packaging and should be inspected for

damage before use. If there is any transit damage take pictures of the

iii

CE Conformity

product packaging and notify the carrier immediately with all the relevant

details of the shipment. Packing materials should be kept for inspection and

also for if the product needs to be returned.

The product is shipped with the following equipment so please check to

ensure that you have all of the items below. If anything is missing, please

contact the supplier of your equipment immediately.

Item Quantity

Product unit 1

IEC mains lead fitted with moulded mains plug 1

Handbook and warranty card 1

If you require a different power lead, please let us know when ordering the

product.

Repairs & Returns

Please contact Sonifex or your supplier if you have any problems with your

Sonifex product. Email technical.support@sonifex.co.uk for the repair/

upgrade/returns procedure, or for support & questions regarding the

product operation.

Safety & Installation of Mains

Operated Equipment

There are no user serviceable parts inside the equipment. If you should

ever need to look inside the unit, always disconnect the mains supply

before removing the equipment covers. The cover is connected to earth by

means of the fixing screws. It is essential to maintain this earth/ground

connection to ensure a safe operating environment and provide

electromagnetic shielding.

Voltage Setting Checks

Ensure that the machine operating voltage is correct for your mains power

supply by checking the box in which your product was supplied. The voltage

is shown on the box label. The available voltage settings are 115V, or 230V.

Please note that all products are either switchable between 115V and 230V,

or have a universal power supply.

Power Cable & Connection

An IEC power connector is supplied with the product which has a moulded

plug attached.

The mains plug or IEC power connector is used as the disconnect device.

The mains plug and IEC power connector shall remain readily operable to

disconnect the apparatus in case of a fault or emergency.

The mains lead is automatically configured for the country that the product

is being sent to, from one of:

1 AVN-GMC IEEE1588 PTP Grandmaster Clock with GPS Receiver

The unit has a front panel power button and dual power connectors - an IEC

mains input and a 12V DC input, which allows the AVN-GMCS to be used for

both studio and mobile installations. Moreover this allows for a secondary

power source to reduce the effect of power down events. In any case, the

unit monitors the status of both power sources and displays this on the front

panel.

The unit can be put into a low-power sleep mode when not in use, with an

instant start when power is re-applied. In power off situations, a super

capacitor is used to keep the GPS receiver powered in a low power mode for

more than 20 hours, enabling the receiver to regain lock immediately rather

than having to ‘cold’ start. A Real-Time Clock (RTC) is fitted to hold the time

over power off conditions.

Front Panel Display & Indicators

Front Panel Indicators

Ethernet

An indication of network link status. This LED is

green when an Ethernet link is established or

red when the link is down.

GPS

If the unit is using GPS as its primary

synchronisation source, this LED is illuminated

green.

Sync In

If the unit is using the external input as the primary synchronisation source,

this LED is illuminated green.

Lock

GPS Mode:

Green - The GPS receiver has locked to 4 or more satellites.

Yellow - The GPS receiver has locked to 3 satellites.

Red - The GPS receiver has locked to 2 or fewer satellites.

Ext Sync Mode:

Green - The input sync clock is valid.

Red - The input sync clock is invalid or disconnected.

Master

Green - This means that the PTP state of the unit is set to Master.

Yellow - This shows that the unit is in another PTP state other than

Master or Slave.

Red - This means that the PTP state of the unit is set to Slave.

AC PSU & DC PSU

The colour of these LEDs show the state of each power input:

Green - This means that the cable is plugged in and is providing the correct

voltage level, within the range 11V to 13V.

Yellow - This means that the cable is plugged in but the voltage level is in a

warning state, within the ranges of either 10V to 11V or 13V to 14V.

Red - This means that the cable is unplugged or the voltage level is out of

specification (less than 10V or more than 14V).

Fig 1-2: Front Panel

Indicators

AVN-GMC IEEE1588 PTP Grandmaster Clock with GPS Receiver 1

Display & Spinwheel

Fig 1-3: Display & Spinwheel

The front panel contains an OLED monochrome display which is normally

used to show unit statuses and settings . The display is used with the

spinwheel and directional buttons to navigate, select and edit parameters &

settings via the menu structure.

Fig 1-4: Default Screen Display

From the top, left column:

Device ID

Active PTP profile

Number of Satellites detected

Average Signal Strength – Each bar represents 10dBHz

From the top, right column:

Time displayed in 24 hour, hh:mm:ss format and the selected time base

Date displayed in the selected date format.

External sync input frequency

Selected word clock output frequency

Selected VarPPs output frequency

Power Button

This puts the unit in and out of standby mode.

Standby Mode - Power button is red

Normal Powered Mode - Power button is green

On applying power to the AC mains or DC power inputs, the button is

illuminated red, meaning that it is in standby mode. In standby mode, all

operation is halted. A momentary press of the power button restarts the

unit into normal power mode.

To put the unit into standby mode, press and hold the button for two

seconds, then release it. The current mode is remembered through a power

cycle and the standby mode can also be disabled through the webserver.

Resetting the unit then holding down the power button puts the unit into

boot loader mode.

GPS Operation

The unit will begin collecting GPS information as soon as an antenna is

connected. The number of satellites found is displayed on the front panel,

along with the average signal strength. More in depth lock information is

included on the web server ‘Device Info’ page. On boot up, the unit can

take a few minutes to deliver the first GPS fix. After this, the on-board super

capacitor will enable the receiver to store the data required to perform a

quick start on power up. The super capacitor will power the receiver’s

memory for more than 20 hours.

AVN-GMC IEEE1588 PTP Grandmaster Clock with GPS Receiver 1

Ethernet

This is a standard 100BASE-T CAT5 Ethernet RJ45 connector to connect the

unit to the network. The connector has two LEDs that indicate data

throughput and link status. The unit can be controlled remotely over the

Ethernet connection using the built-in webserver.

12V DC Power Input

This 12V power input provides a secondary power source on a KPJX-45 plug.

It accepts voltages in the range of 11.5V - 13.2V and must be able to source

500mA. Both mains and DC power sources can be connected at the same

time, so the DC input can act as an alternative redundant power supply.

IEC Mains Input

Power is applied via a standard three-pin IEC male socket. Mains voltages

between 85V and264V AC and frequencies between 47 and 63Hz are

accepted without adjustment. The Earth pin MUST be connected to ensure

safety.

Front Panel Menu Navigation

he menu is entered by holding the centre

utton (the ‘OK’ button) of the rotational and

irectional spinwheel.

se the four UP, DOWN, LEFT and RIGHT

irectional buttons at the outer edge of

pinwheel to move within the menu.

Once entered a number of pages can be chosen by moving the highlight

using the directional buttons, or by rotating the spinwheel (Clockwise =

DOWN, Anti Clockwise = UP).

Select a Page - Use the OK button, or the RIGHT button

Exit a Page - Use the BACK menu item or the LEFT button.

Exit the Menu Structure - Use the CLOSE menu item, usually at the bottom.

Each dialog page contains a number of options in one of the following

control formats:

String Entry/Edit - Move the cursor highlight to the character that you want

to edit/alter. Use the spinwheel to cycle through the available characters. A

push of the centre OK button changes the character to its default value

which is 'A'. To move to the next character press the RIGHT button.

To end the entry, press the DOWN button and then LEFT/RIGHT directional

buttons to highlight the 'OK' screen box to confirm or the 'CANCEL' box to

ignore the new string and return to the previous one. Press the OK button

to action your choice. Please note, the first and last characters cannot be a

'-'.

IP Address Edit - Move the highlight to one of the 4 IP numbers using the

directional LEFT/RIGHT buttons. These are 3 digit strings which will cycle

from 000 to 255 (and back around), using the spinwheel. Once you have

entered the 4 numbers, use the DOWN button to move to either the 'OK' or

'CANCEL' screen options and press the OK button.

Number Edit - Use the spinwheel to change the number. The number range

is set according to which option has been selected. Once you have finished,

move to either the 'OK' or 'CANCEL' screen options and press the OK

button.

Scale Edit - Use the spinwheel to change the position of the scale bar. Once

you have finished, move to either the ‘OK’ or ‘CANCEL’ screen options and

press the OK button.

Select List Option - Move the cursor highlight to the desired list item and

press the OK button to select it. A tick appears next to the selected option.

1 AVN-GMC IEEE1588 PTP Grandmaster Clock with GPS Receiver

AVN-GMC Menu Tree

Produktspecifikationer

Varumärke:	Delonghi
Kategori:	kaffebryggare
Modell:	ICM15210.1

Behöver du hjälp?

Om du behöver hjälp med Delonghi ICM15210.1 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

kaffebryggare Delonghi Manualer

Delonghi PrimaDonna Soul ECAM610.74.MB Bruksanvisning

4 Januari 2025

Delonghi Magnifica Start ECAM22022B Bruksanvisning

2 Januari 2025

Delonghi ECAM23.123.B Bruksanvisning

31 December 2025

Delonghi Dinamica ECAM353.15.B Bruksanvisning

31 December 2025

Delonghi Stilosa EC260 Bruksanvisning

5 December 2024

Delonghi ECAM23.463.B Bruksanvisning

5 December 2024

Delonghi Dinamica Plus ECAM 370.70.SB Bruksanvisning

5 December 2024

Delonghi Dinamica Plus ECAM380.85.SB Bruksanvisning

5 December 2024

Delonghi PrimaDonna Exclusive ESAM 6900.M Bruksanvisning

9 Oktober 2024

Delonghi Active Line ICM14011 Bruksanvisning

8 Oktober 2024

kaffebryggare Manualer

Nyaste kaffebryggare Manualer

Quigg GT-TCM-03 - 5609 Bruksanvisning

16 Januari 2025

Krups F309 - PRO AROMA Bruksanvisning

16 Januari 2025

Kenwood CMM480 series Bruksanvisning

16 Januari 2025

Krups F2707199F Duothek Therm Bruksanvisning

16 Januari 2025

Krups EA85 serie Bruksanvisning

15 Januari 2025

Krups F30901 - PRO AROMA Bruksanvisning

15 Januari 2025

AEG Electrolux BTV 9900 M Bruksanvisning

15 Januari 2025

Krups KP 2005 Bruksanvisning

15 Januari 2025

Krups KM4682 - T8.2 Bruksanvisning

15 Januari 2025

Krups PROEDITION INOX FMD3 Bruksanvisning

15 Januari 2025