Delta 21T133 Bruksanvisning

Delta Kran 21T133

Läs nedan 📖 manual på svenska för Delta 21T133 (2 sidor) i kategorin Kran. Denna guide var användbar för 12 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

Lavatory Faucets

4" Centerset - TUF-TECK® compression structures

Model No: 21T133

SPECIFICATION:

•

HEAVY DUTY CAST BRASS centerset faucet

•

102mm (4") centers, two handle

•

Polished chrome plated nish with polished underspout

•

Metal hold-down package

•

Metal hold-down package

•

Outlet#: 3 - Vandal Resistant 1.5 gpm (5.7L/min) Flow Control Aerator

•

Handle#: 3 - 76 mm (3") Lever Blade Handles-ADA Compliant-Metal-Color

indexed-Vandal Resistant (VR) screws

•

Std. Product Less Pop-up (No Pop-up Hole)

COMPLIES WITH:

•

CSA certied

•

Complies to ASME A112.18.1/CSA B125.1

•

Veried compliant with 0.25% weighted average Pb content regulations

•

Handles No. 2, 3, 4 and 5

Indicates compliance to ICC/ANSI A117.1

•

Outlet options 2,3 and 4 are EPA WaterSense listed

•

(Contact Delta Representative for State and/or Local Approvals)

(Dimensional drawing on following page)

•

Not Available

OPERATION:

NOTES:

21C - 4" Centerset- CER-TECK ceramic structures

Delta reserves the right (1) to make changes to specications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.

Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced September 04, 2019.

- 1.0.18766

Page of1 2

Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - (317) 848-1812

Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - (905) 712-3030

Model No: 21T133

Delta reserves the right (1) to make changes to specications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.

Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced September 04, 2019.

- 1.0.18766

Page of2 2