Denon DL-A100 Bruksanvisning

Denon hi-fi system DL-A100

Läs nedan 📖 manual på svenska för Denon DL-A100 (5 sidor) i kategorin hi-fi system. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/5

ENGLISH SVENSKANEDERLANDSESPAÑOLITALIANOFRANCAISDEUTSCH日本語

Thank you for purchasing the DENON

100th anniversary DL-A100 cartridge.

This cartridge is developed by precisely

reproducing the original engineering

reference model of the high-performance

Japanese standard cartridge DL-103 and

using the latest tuning technologies.

DENON (then Nippon Columbia Co., Ltd.)

developed DL-103 jointly with NHK Science

& Technical Research Laboratories to

produce “highly reliable high-performance

cartridges for stereo record broadcasting”

in 1964. Since its launch, DL-103 has

consistently been used as the standard

cartridge not only in NHK FM broadcasting

but also by many audio and music fans.

The DENON 100th anniversary DL-A100

cartridge is carefully manufactured one

by one just as DL-103 has been since its

launch. We hope you enjoy using a cartridge

that inherits the time-proven reliability of

DL-103.

Accessories

Mount screws (Length:Approx 17 mm)

··· 2

Mount screws (Length:Approx 11 mm)

··· 2

Mount nuts

·········································· 2

Washer ··············································· 2

Stylus cover ········································ 1

Stylus cleaning brush ························· 1

Stylus position adjustment gauge ······ 1

Owner’s Manual ································· 1

Data sheet ·········································· 1

Service Station list ······························ 1

t y

Cautions on handling

• The Stylus is very delicate. Applying

excessive force to the stylus, such as

pressing with a ﬁnger can break it. Handle

the cartridge with the utmost care.

• A powerful magnet is used in the

cartridge. Note that carelessly bringing a

steel screwdriver or other such item near

the cartridge will result in it being attracted

by the magnet and may result in damage

to the stylus, so care must be taken.

• Be sure to use the stylus cover when

mounting the cartridge in the head shell,

or when otherwise handling the cartridge.

ENGLISH 日本語DEUTSCHFRANCAISITALIANOESPAÑOLNEDERLANDSSVENSKA

Mounting to the head shell

• To protect the stylus, be sure to mount the stylus cover when

performing this procedure.

• Adjust to the stylus position speciﬁed for the turntable system you

are using and mount properly without tilting or turning it.

Stylus position

• When adjusting the stylus position,

use the provided stylus position

adjustment gauge.

• Two types of screws are provided

with the cartridge. Use the screws

of the length suitable for your shell.

• The layout of the output terminals is as shown on the diagram below.

Be sure to connect properly.

E LE R

L R

Left channel

Ground (blue)

Left channel

Hot (white)

Right channel

Ground (green)

Right channel

Hot (red)

NOTE

When connecting the cartridge, be sure to use the tipped leads and

press them onto the terminals. Applying heat to the output terminals

of the cartridge, such as in direct soldering, will cause internal damage

to the cartridge, such as wire breakage.

Tracking force adjustment

Tracking force in the range of 25 mN ±3 mN (2.5 g ±0.3 g) should be

used.

Output voltage

The output voltage is 0.3 mV. If your ampliﬁer does not support

the MC cartridge input, use a step-up transformer or head ampliﬁer

designed for MC type cartridges.

Stylus cleaning

Use the included brush to carefully remove any dirt from the tip of the

stylus before and after playing records.

Brush

Produktspecifikationer

Varumärke:	Denon
Kategori:	hi-fi system
Modell:	DL-A100
Färg på produkten:	Zwart
Bredd:	437 mm
Djup:	249 mm
Höjd:	43 mm
Processorfamilj:	Intel
Ethernet LAN:	Ja
Antal USB 2.0-portar:	2
VGA (D-Sub) port(ar):	1
Antal Ethernet LAN (RJ-45)-portar:	4
Nätförsörjning:	200 W
Hållbarhetscertifikat:	RoHS
Typ processor:	Nee
Ethernet LAN, dataöverföringshastigheter:	10,100,1000 Mbit/s
Förvaringstemperatur:	-40 - 70 °C
Antal fans:	2 ventilator(en)
Processoruttag:	BGA 1310
PCI Express-kortplatsversion:	3.0
Maximalt internminne:	128 GB
Inbyggd grafikadaptermodell:	Aspeed AST2400
Förvaringsfuktighet:	5 - 95 procent
Bostadstyp:	Rack (1U)
ETC:	Ja
Ethernet-gränssnittstyp:	Fast Ethernet, Gigabit Ethernet
Chipset moderkort:	Intel SoC
Koppar Ethernet-kabelteknik:	10BASE-T, 100BASE-TX, 1000BASE-T
Gränssnitt för lagringsenheter som stöds:	SATA III
Seriell port(ar):	1
PCI Express x4-platser:	1
Minnesspänning:	1.2 V
Antal processorer som stöds:	1
Maximalt UDIMM-minne:	64 GB
Antal DIMM-platser:	4
Stöder RDIMM-klockhastigheter:	1600,1866,2133,2400 MHz
Stöder DIMM-modulfunktioner:	4GB, 8GB, 16GB, 32GB
Antal lagringsenheter som stöds:	4
Storlekar för lagringsenheter stöds:	2.5, 3.5 "
Minnestyper som stöds:	DDR4-SDRAM
Hot-swap hårddiskfack:	Ja
AC-ingångsspänning:	100 - 240 V
AC-ingångsfrekvens:	50 - 60 Hz
Drifttemperatur (TT):	0 - 40 °C
Relativ luftfuktighet i drift (VV):	8 - 90 procent
Harmoniserad systemkod (HS):	84714100
Ventilator diameter:	40 mm
BIOS-typ:	UEFI AMI
ACPI-version:	5.0
DC-utgångsström (+ 12 V):	16 A
IPMI LAN (RJ-45) port:	Ja
DC-utgångsström (+5 V):	8 A
BIOS-funktioner:	Plug & Play, SMBIOS 2.7.1, UEFI