DeWalt DHS790 Bruksanvisning

DeWalt Sågmaskin DHS790

Läs nedan 📖 manual på svenska för DeWalt DHS790 (76 sidor) i kategorin Sågmaskin. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/76

DHS790

12" (305 mm) 120V Max* Double Bevel Sliding Compound Miter Saw

Scie coulissante à onglet mixte 305 mm (12 po), 120V max*

Sierra ingletadora compuesta deslizante de doble bisel de 305mm

(12") de 120 V Máx*

INSTRUCTION MANUAL

GUIDE D’UTILISATION

MANUAL DE INSTRUCCIONES

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE

GARANTÍA. : ADVERTENCIA LÉASE ESTE INSTRUCTIVO ANTES DE

USAR EL PRODUCTO.

Questions? Visit us at www.dewalt.com

Des questions ? Rendez nous visite à www.dewalt.com

¿Tiene preguntas? Visítenos en www.dewalt.com

Before returning this product call

1-800-4-

DeWALT

IF YOU SHOULD EXPERIENCE A PROBLEM WITH YOUR D

WALT PURCHASE,

CALL 1-800-4-D

WALT

IN MOST CASES, A D

WALT REPRESENTATIVE CAN RESOLVE

YOUR PROBLEM OVER THE PHONE.

IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US A CALL.

YOUR FEEDBACK IS VITAL TO THE SUCCESS OF D

WALT’S

QUALITY IMPROVEMENT PROGRAM.

Final Print Size: 8.5" x 11"

English

Definitions: Safety Guidelines

This instruction manual uses the following safety alert symbols and words to alert you to

hazardous situations and your risk of personal injury or property damage.

DANGER: will Indicates an imminently hazardous situation which, if not avoided,

result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

(Used without word) Indicates a safety related message.

NOTICE: Indicates a practice which, if not avoided, not related to personal injury

may result in property damage.

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D

WALT TOOL,

CALL US TOLL FREE AT: 1-800-4-D

WALT (1-800-433-9258).

WARNING: To reduce the risk of injury, read the instruction manual.

Important Safety Instructions

WARNING! Read all safety warnings, instructions, illustrations and

specifications provided with this power tool. Failure to follow all instructions listed

below may result in electric shock, fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS

FOR FUTURE REFERENCE

The term “power tool” in the warnings refers to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

1) WORK AREA SAFETY

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite the dust

or fumes.

c) Keep children and bystanders away while operating a power tool. Distractions can

cause you to lose control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do

not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs

and matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators,

ranges and refrigerators. There is an increased risk of electric shock if your body is

earthed or grounded.

c) Do not expose power tools to rain or wet conditions. Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the

power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged

or entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable, use a residual current

device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3) PERSONAL SAFETY

a) Stay alert, watch what you are doing and use common sense when operating a

power tool. Do not use a power tool while you are tired or under the influence of

drugs, alcohol or medication. A moment of inattention while operating power tools may

result in serious personal injury.

b) Protective Use personal protective equipment. Always wear eye protection.

equipment such as dust mask, non-skid safety shoes, hardhat, or hearing protection used

for appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the off position before

connecting to power source and/or battery pack, picking up or carrying the tool.

Carrying power tools with your finger on the switch or energizing power tools that have the

switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on. A wrench

or a key left attached to a rotating part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables better

control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing

and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught

in moving parts.

g) If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of dust collection can

reduce dust-related hazards.

h) Do not let familiarity gained from frequent use of tools allow you to become

complacent and ignore tool safety principles. A careless action can cause severe

injury within a fraction of a second.

4) POWER TOOL USE AND CARE

a) The Do not force the power tool. Use the correct power tool for your application.

correct power tool will do the job better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off. Any power tool

that cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the

power tool before making any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce the risk of starting the power tool

accidentally.

d) Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc., in accordance with these

instructions taking into account the working conditions and the work to be

performed. Use of the power tool for operations different from those intended could result

in a hazardous situation.

5) BATTERY TOOL USE AND CARE

a) Recharge only with the charger specified by the manufacturer. A charger that is

suitable for one type of battery pack may create a risk of fire when used with another

battery pack.

b) Use power tools only with specifically designated battery packs. Use of any other

battery packs may create a risk of injury and fire.

Produktspecifikationer

Varumärke:	DeWalt
Kategori:	Sågmaskin
Modell:	DHS790
Bredd:	230 mm
Djup:	180 mm
Typ av strömkälla:	ATX
Antal USB 2.0-portar:	4
Mikrofon, linjeingång:	Ja
Antal Ethernet LAN (RJ-45)-portar:	1
Hörlursutgångar:	3
Processoruttag:	Socket FM1
Processorfabrikant:	AMD
Inbyggd grafikadapter:	Nee
Kompatibla operativsystem:	Windows XP, Vista
Ljudutgångskanaler:	5.1 kanalen
Nätverksfunktioner:	Gigabti Ethernet
Ethernet-gränssnittstyp:	Fast Ethernet, Gigabit Ethernet
Chipset moderkort:	AMD A55
Ljudchip:	VIA VT1705
Medföljande drivrutiner:	Ja
PCI Express x1-platser:	1
PCI Express x16-platser:	1
Minneskanal:	Dubbelkanaals
Gränssnitt för lagringsenheter som stöds:	SATA II
PS/2-port(ar):	2
Komponent för:	PC
LAN-kontroller:	Realtek RTL8111E
Typer av RAID:	0, 1,10
PCI-platser:	1
Kompatibla processorer:	AMD Athlon X2 Dual-Core, AMD Sempron
Minnestyper som stöds:	DDR3-SDRAM
Moderkort chipset familj:	AMD
Moderkorts formfaktor:	micro ATX
Minnesklockhastigheter som stöds:	1333,1600,1866 MHz
BIOS-typ:	AMI
BIOS-minnesstorlek:	16 Mbit
Stöd för parallell bearbetning:	Niet ondersteund
COM-anslutningar:	1
Anslutning för CPU-kylare:	Ja
ATX-strömkontakt (24-stift):	Ja
Strömförsörjningsfläktanslutning:	Ja
USB 2.0-anslutningar:	2
Anslutning för ljudpanel på framsidan:	Ja
S/PDIF uitgang:	Ja
Antal SATA II-kontakter:	4