DeWalt DW008K-2 Bruksanvisning

DeWalt Sågmaskin DW008K-2

Läs nedan 📖 manual på svenska för DeWalt DW008K-2 (36 sidor) i kategorin Sågmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/36

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA

DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES

DE USAR EL PRODUCTO.

INSTRUCTION MANUAL

GUIDE D'UTILISATION

MANUAL DE INSTRUCCIONES

DW008

Cordless Reciprocating Saw

Scies alternatives à régulateur sans fil

Sierras reciprocantes in alámbrico

Questions? See us in the World Wide Web at www.dewalt.com

moment of inattention while operating power tools may result in

serious personal injury,

•Dress properly. Do not wear loose clothing or jewelry. Contain

long hair. Keep your hair, clothing, and gloves away from

moving parts. Loose clothing, jewelry, or long hair can be caught

in moving parts. Air vents often cover moving parts and should also

be avoided.

•Avoid accidental starting. Be sure switch is in the locked or off

position before inserting battery pack. Carrying tools with your

finger on the switch or inserting the battery pack into a tool with the

switch on invites accidents.

• Remove adjusting keys or switches before turning the tool on.

A wrench or key that is left attached to a rotating part of the tool

may result in personal injury.

•Do not overreach. Keep proper footing and balance at all

times. Proper footing and balance enables better control of the tool

in unexpected situations.

•Use safety equipment. Always wear eye protection. Dust mask,

non-skid safety shoes, hard hat, or hearing protection must be

used for appropriate conditions.

TOOL USE AND CARE

•Use clamps or other practical way to secure and support the

workpiece to a stable platform. Holding the work by hand or

against your body is unstable and may lead to a loss of control.

•Do not force tool. Use the correct tool for your application. The

correct tool will do the job better and safer and the rate for which it

is designed.

•Do not use tool if switch does not turn it on or off. Any tool that

cannot be controlled with the switch is dangerous and must be

repaired.

•Disconnect battery pack from tool or place the switch in the

locked or off position before making any adjustments, chang-

ing accessories, or storing the tool. Such preventative safety

measures reduce the risk of starting the tool accidentally.

English

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR

ANY DEWALT TOOL, CALL US TOLL FREE AT:

1-800-4-DEWALT (1-800-433-9258)

General Safety Rules – For All Battery

Operated Tools

WARNING! Read and understand all instructions.

Failure to follow all instructions listed below may result in

electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA

•Keep your work area clean and well lit. Cluttered benches and

dark areas invite accidents.

•Do not operate power tools in explosive atmospheres, such

as in the presence of flammable liquids, gases, or dust. Power

tools create sparks which may ignite the dust or fumes.

•Keep bystanders, children, and visitors away while operating

a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

•Do not abuse the cord. Never use the cord to carry the tool.

Keep cord away from heat, oil, sharp edges or moving parts.

Replace damaged cords immediately. Damaged cords may cre-

ate a fire.

•A battery operated tool with integral batteries or a separate bat-

tery pack must be recharged only with the specified charger

for the battery. A charger that may be suitable for one type of bat-

tery may create a risk of fire when used with another battery.

•Use battery operated tool only with the specifically designed

battery pack. Use of any other batteries may create a risk of fire.

PERSONAL SAFETY

•Stay alert, watch what you are doing and use common sense

when operating a power tool. Do not use tool while tired or

under the influence of drugs, alcohol, or medication. A

•Store idle tools out of reach of children and other untrained

persons. Tools are dangerous in the hands of untrained users.

•When battery pack is not in use, keep it away from other metal

objects like: paper clips, coins, keys, nails, screws, or other

small metal objects that can make a connection from one ter-

minal to another. Shorting the battery terminals together may

cause sparks, burns, or a fire.

•Maintain tools with care. Keep cutting tools sharp and clean.

Properly maintained tools, with sharp cutting edges are less likely

to bind and are easier to control.

•Check for misalignment or binding of moving parts, breakage

of parts, and any other condition that may affect the tools

operation. If damaged, have the tool serviced before using. Many

accidents are caused by poorly maintained tools.

•Use only accessories that are recommended by the manufac-

turer for your model. Accessories that may be suitable for one

tool, may become hazardous when used on another tool.

SERVICE

•Tool service must be performed only by qualified repair per-

sonnel. Service or maintenance performed by unqualified person-

nel could result in a risk of injury.

•When servicing a tool, use only identical replacement parts.

Follow instructions in the Maintenance section of this manu-

al. Use of unauthorized parts or failure to follow Maintenance

Instructions may create a risk of electric shock or injury.

Additional Specific Safety Rules

•Hold tool by insulated gripping surfaces when performing an

operation where the cutting tool may contact hidden wiring.

Contact with a “live” wire will make exposed metal parts of the tool

“live” and shock the operator.

CAUTION: Wear appropriate personal hearing protection dur-

ing use. Under some conditions and duration of use, noise from this

product may contribute to hearing loss.

English

WARNING: Some dust created by power sanding, sawing, grinding,

drilling, and other construction activities contains chemicals known to

cause cancer, birth defects or other reproductive harm. Some exam-

ples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement and other masonry prod-

ucts, and

• arsenic and chromium from chemically-treated lumber (CCA).

Your risk from these exposures varies, depending on how often you

do this type of work. To reduce your exposure to these chemicals:

work in a well ventilated area, and work with approved safety equip-

ment, such as those dust masks that are specially designed to filter

out microscopic particles.

•Avoid prolonged contact with sawdust from treated lumber.

Do not allow dust to get into your mouth, eyes or lay on the skin.

Wear protective clothing whenever possible.

WARNING: Use of this tool can generate and/or disburse dust,

which may cause serious and permanent respiratory or other injury.

Always use NIOSH/OSHA approved respiratory protection appropri-

ate for the dust exposure. Direct particles away from face and body.

Important Safety Instructions for

Battery Packs

Your tool uses a 24 Volt D WALT battery pack. When orderingE

replacement battery packs, be sure to include catalog number and

voltage. The battery pack is not fully charged out of the carton! First

read the safety instructions below. Then follow charging notes and

procedures.

CAUTION: The batteries in your battery pack are the nickel–cad-

mium type. Cadmium is considered to be a toxic material by the

Environmental Protection Agency. Before disposing of damaged or

worn out Nickel–Cadmium battery packs, check with your state

Environmental Protection Agency to find out about special restrictions

on the disposal of these battery packs or return them to a D EWALT

certified service center for recycling.

Produktspecifikationer

Varumärke:	DeWalt
Kategori:	Sågmaskin
Modell:	DW008K-2
Färg på produkten:	Pink, White
Snabbstartsguide:	Ja
Förvaringsväska:	Ja
Kroppszoner:	Inner upper arms, Outer upper arms
Hårborttagningsteknik:	IPL
Justerbar intensitet:	Ja
Lichtflöde (max):	5 J/cm²
Lampans livslängd (blixt):	100000
Kroppsfäste:	Ja
Behandlingstid för bikinilinjen:	4 min
Behandlingstid underarm:	1 min
Behandlingstid för hela benet:	8 min
Kroppsfästes storlek:	4 cm²
Ljusspektrum på kroppen:	525 nm
AC-ingångsspänning:	100 - 240 V
Ljusflöde (min):	2.5 J/cm²