DeWalt DW562K Bruksanvisning

DeWalt Hamer DW562K

Läs nedan 📖 manual på svenska för DeWalt DW562K (21 sidor) i kategorin Hamer. Denna guide var användbar för 19 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/21

DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 Printed in U.K. (FEB01-1) Form No. 329528-02

DW562/329528-02 5/7/02 11:34 AM Page 2

INSTRUCTION MANUAL

GUIDE D'UTILISATION

MANUAL DE INSTRUCCIONES

DW562/DW566

Heavy Duty SDS Rotary Hammers

Perceuse rotatives SDS de service intensif

Rotomartillos SDS para trabajo pesado

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA

DE GARANTÍA. LÉASE ESTE INSTRUCTIVO ANTESADVERTENCIA:

DE USAR EL PRODUCTO.

Questions? See us in the World Wide Web at www.dewalt.com

DW562/329528-02 5/7/02 11:34 AM Page 3

General Safety Rules

WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS.

Failure to follow all instructions listed below may result in electric

shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA

• Keep your work area clean and well lit. Cluttered benches and dark

areas invite accidents.

• Do not operate power tools in explosive atmospheres, such as in

the presence of flammable liquids, gases, or dust. Power tools

create sparks which may ignite the dust or fumes.

• Keep bystanders, children, and visitors away while operating a

power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

• Grounded tools must be plugged into an outlet properly installed

and grounded in accordance with all codes and ordinances.

Never remove the grounding prong or modify the plug in any way.

Do not use any adapter plugs. Check with a qualified electrician if

you are in doubt as to whether the outlet is properly grounded. If the

tools should electrically malfunction or break down, grounding provides

a low resistance path to carry electricity away from the user.

Applicable only to Class I (grounded) tools.

• Double insulated tools are equipped with a polarized plug (one

blade is wider than the other.) This plug will fit in a polarized outlet

only one way. If the plug does not fit fully in the outlet, reverse the

plug. If it still does not fit, contact a qualified electrician to install a

polarized outlet. Do not change the plug in any way. Double insulation

eliminates the need for the three wire grounded power cord and

English

grounded power supply system. Applicable only to Class II (double

insulated) tools.

• Avoid body contact with grounded surfaces such as pipes,

radiators, ranges and refrigerators. There is an increased risk of

electric shock if your body is grounded.

• Don’t expose power tools to rain or wet conditions. Water entering

a power tool will increase the risk of electric shock. Other liquids, such

as perspiration present the same hazard.

• Do not abuse the cord. Never use the cord to carry the tools or

pull the plug from an outlet. Keep cord away from heat, oil, sharp

edges or moving parts. Replace damaged cords immediately.

Damaged cords increase the risk of electric shock.

• When operating a power tool outside, use an outdoor extension

cord marked “W-A” or “W.” These cords are rated for outdoor use

and reduce the risk of electric shock. When using an extension cord,

be sure to use one heavy enough to carry the current your product will

draw. An undersized cord will cause a drop in line voltage resulting in

loss of power and overheating. The following table shows the correct

size to use depending on cord length and nameplate ampere rating. If

in doubt, use the next heavier gage. The smaller the gage number,

the heavier the cord.

Minimum Gage for Cord Sets

Volts Total Length of Cord in Feet

120V 0-25 26-50 51-100 101-150

240V 0-50 51-100 101-200 201-300

Ampere Rating

More Not more AWG

Than Than

0 - 6 18 16 16 14

6 - 10 18 16 14 12

10 - 12 16 16 14 12

12 - 16 14 12 Not Recommended

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS

OR ANY DEWALT TOOL, CALL US TOLL FREE AT:

1-800-4-DEWALT (1-800-433-9258)

DW562/329528-02 5/7/02 11:34 AM Page 1

Produktspecifikationer

Varumärke:	DeWalt
Kategori:	Hamer
Modell:	DW562K
Färg på produkten:	Zwart
Bredd:	114.35 mm
Djup:	279.85 mm
Höjd:	49.55 mm
Instruktioner:	Ja
Typ av förpackning:	Doos
Processorfrekvens:	1605 MHz
Maximal upplösning:	7680 x 4320 Pixels
Antal HDMI-portar:	1
HDMI-version:	2.0b
Integrerad TV-tuner:	Nee
Antal DisplayPorts:	3
AMD FreeSync:	Ja
Antal fans:	3 ventilator(en)
Färg på belysningen:	Multi
Klockhastighetsminne:	14000 MHz
Grafikminne:	8 GB
DisplayPort-version:	1.4
Typ av anslutning:	PCI Express x16 4.0
Typ av kylning:	Actief
Grafikprocessorfamilj:	AMD
Grafikprocessor:	Radeon RX 5700 XT
ANNORLUNDA:	Nee
Grafikadapter, minnestyp:	GDDR6
Minnesbandbredd (max):	448 GB/s
Minnesbuss:	256 Bit
OpenGL version:	4.6
DirectX version:	12.0
Minsta systemströmförsörjning:	600 W
Exponering:	Ja
Ventilator diameter:	80 mm
Dual Link DVI:	Nee
Streama processorer:	2560
Maximalt antal visningar per grafikkort:	4
PhysX:	Nee
Processorn ökar klockhastigheten:	1905 MHz
Ytterligare strömkontakter medföljer:	1x 6-pin, 1x 8-pin
Koeltechniek:	GIGABYTE WINDFORCE 3X