DeWalt DW7187 Bruksanvisning

DeWalt Sågmaskin DW7187

Läs nedan 📖 manual på svenska för DeWalt DW7187 (28 sidor) i kategorin Sågmaskin. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/28

DW7187 Miter Saw Laser System

Système laser pour scie à onglets DW7187

Sistema láser para sierra ingletadora DW7187

INSTRUCTION MANUAL

GUIDE D'UTILISATION

MANUAL DE INSTRUCCIONES

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA

DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO

ANTES DE USAR EL PRODUCTO.

If you have questions or comments, contact us.

Pour toute question ou tout commentaire, nous contacter.

Si tiene dudas o comentarios, contáctenos.

1-800-4-DEWALT • www.dewalt.com

English

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT

THIS OR ANY DEWALT TOOL, CALL US TOLL FREE AT: 1-800-

4-DEWALT (1-800-433-9258)

Safety Instructions for Lasers

WARNING! Read and understand all instructions.

Failure to follow all instructions listed below may result

in electric shock, fire and/or serious personal injury.

WARNING: For your own safety, read the tool

instruction manual before using any accessory. Failure

to heed these warnings may result in personal injury and

serious damage to the tool and the accessory. When

servicing this tool, use only identical replacement parts.

SAVE THESE INSTRUCTIONS

WARNING! Laser Radiation Exposure. Do not disassem-

ble or modify the laser. There are no user serviceable parts

inside. Serious eye injury could result.

WARNING: Hazardous Radiation. Use of controls or adjust-

ments or performance of procedures other than those specified

herein may result in hazardous radiation exposure.

• Do not operate the laser in explosive atmospheres, such

as in the presence of flammable liquids, gases, or dust.

Power tools create sparks which may ignite the dust or fumes.

• Store idle laser out of reach of children and other

untrained persons. Lasers are dangerous in the hands of

untrained users.

• Tool service must be performed only by qualified repair

personnel. Service or maintenance performed by unqual-

ified personnel may result in injury. To locate your nearest

DEWALT service center call 1-800-4-DEWALT (1-800-433-

9258) or go to http://www.dewalt.com on the Internet.

• Do not use optical tools such as a telescope or transit to

view the laser beam. Serious eye injury could result.

• Do not place the laser in a position which may cause any-

one to intentionally or unintentionally stare into the laser

beam. Serious eye injury could result.

• Turn the laser off when it is not in use. Leaving the laser

on increases the risk of staring into the laser beam.

• Do not disassemble the laser or laser power supply.

There are no user serviceable parts inside.

• Do not modify the laser in any way. Modifying the tool may

result in Hazardous Laser Radiation Exposure.

• Do not operate the laser around children or allow

children to operate the laser. Serious eye injury may result.

• Do not remove or deface warning labels. Removing labels

increases the risk of exposure to radiation.

•Use Miter Saw Laser System only with specifically

designated DEWALT Miter Saws. Use of Miter Saw Laser

System on non-designated tools may create a risk of injury.

•Use Laser part # 623020-00 only with Laser Power Supply

part # 618212-00. Use of Laser with another laser power

supply may create injury.

•Use Laser Power Supply part # 618212-00 only with Laser

part # 623020-00. Use of Laser with another laser power

supply may create injury.

CAUTION: Use of controls or adjustments or perform-

ance of procedures other than those specified herein may

result in Hazardous Radiation Exposure.

• The label on your tool may include the following symbols.

V ..................volts mW ........milliwatts

......Laser warning nm ..........wavelength in

.................... ..............symbol nanometers

II ..................Class II Laser IIIa ..........Class IIIa Laser

................alternating current ........direct current

W..................watts Hz ..........hertz

English

WARNING LABELS

For your convenience and safety, the following label is on your

laser (Fig. 1).

CAUTION: LASER

RADIATION – DO

NOT STARE INTO

BEAM. CLASS 2

LASER PRODUCT.

CAUTION: CLASS 2

LASER RADIATION

WHEN OPEN DO

NOT STARE INTO

THE BEAM.

Laser

Information

The DW7187 Miter Saw

Laser System is a Class 2

laser product and complies

with 21CFR 1040.10 and

1040.11 except for devia-

tions pursuant to laser notice No. 50, dated July 26, 2001.

Installation of Miter Saw Laser

System

WARNING: Read all instructions for the Installation of Laser

Power Supply and the Installation of Laser before proceeding

with the Installation of the Miter Saw Laser System.

INSTALLATION OF LASER POWER SUPPLY (LPS)

WARNING: Disconnect the saw from the power source.

1. Remove the two screws from the miter saw handle with sup-

plied T20 Torx wrench. Save the screws for the assembly of

the Laser Power Supply (LPS) in Step 4. Retain the handle

cover for future use if LPS is removed.

FIG. 1

2. Attach the connections to the LPS.

3. Arrange the wire connection

such that the wide portion of the

connector is placed against the

bottom of the miter saw handle

and fit the LPS to the handle.

Produktspecifikationer

Varumärke:	DeWalt
Kategori:	Sågmaskin
Modell:	DW7187
Färg på produkten:	Zwart
Husmaterial:	Metaal
Monteringsmetod:	Plafond
Maximal viktkapacitet:	90.7 kg
Tiltvinkelområde:	-25 - 5 °