DeWalt DW802 Bruksanvisning
DeWalt
Slipmaskin
DW802
Läs nedan 📖 manual på svenska för DeWalt DW802 (48 sidor) i kategorin Slipmaskin. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/48
DW802, DW802G
Heavy Duty Small Angle Grinder
Petites meuleuses angulaires de service intensif
Esmeriladoras angulares pequenas para trabajo pesado
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO
ANTES DE USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-DEWALT • www.dewalt.com
English
2
SAVE THESE INSTRUCTIONS
WARNING! Read and understand all instructions includ-
ing that provided with attachment and accessories.
Failure to follow all instructions listed below may result in electric
shock, fire and/or serious personal injury.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
OR ANY DEWALT TOOL, CALL US TOLL FREE AT:
1-800-4-DEWALT (1-800-433-9258)
General Safety Instructions
WORK AREA
• Keep your work area clean and well lit. Cluttered benches
and dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases, or dust.
Power tools create sparks which may ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operat-
ing a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
• Grounded tools must be plugged into an outlet properly
installed and grounded in accordance with all codes and
ordinances. Never remove the grounding prong or modify
the plug in any way. Do not use any adapter plugs. Check
with a qualified electrician if you are in doubt as to whether
the outlet is properly grounded. If the tools should electrically
malfunction or break down, grounding provides a low resist-
ance path to carry electricity away from the user. Applicable
only to Class I (grounded) tools.
• Double insulated tools are equipped with a polarized plug
(one blade is wider than the other.) This plug will fit in a
polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician to install a polarized outlet. Do not
change the plug in any way. Double insulation eliminates
the need for the three wire grounded power cord and grounded
power supply system. Applicable only to Class II (double
insulated) tools.
• Avoid body contact with grounded surfaces such as pipes,
radiators, ranges, and refrigerators. There is an increased
risk of electric shock if your body is grounded.
• Don’t expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord to carry the tools
or pull the plug from an outlet. Keep cord away from heat,
oil, sharp edges or moving parts. Replace damaged cords
immediately. Damaged cords increase the risk of electric shock.
• When operating a power tool outside, use an outdoor exten-
sion cord marked “W-A” or “W.” These cords are rated for
outdoor use and reduce the risk of electric shock.
Minimum Gage for Cord Sets
Volts Total Length of Cord in Feet
120V 0-25 26-50 51-100 101-150
240V 0-50 51-100 101-200 201-300
Ampere Rating
More Not more AWG
Than Than
6 - 10 18 16 14 12
PERSONAL SAFETY
• Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use tool while
tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while operating power tools may result
in serious personal injury.
English
1
• Dress properly. Do not wear loose clothing or jewelry.
Contain long hair. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes, jewelry, or long hair
can be caught in moving parts. Air vents often cover moving
parts and should also be avoided.
• Avoid accidental starting. Be sure switch is off before
plugging in. Carrying tools with your finger on the switch or
plugging in tools that have the switch on invites accidents.
• Remove adjusting keys or wrenches before turning the
tool on. A wrench or a key that is left attached to a rotating part
of the tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all
times. Proper footing and balance enables better control of the
tool in unexpected situations.
• Use safety equipment. Always wear eye protection. Dust
mask, non-skid safety shoes, hard hat, or hearing protection
must be used for appropriate conditions.
TOOL USE AND CARE
• Use clamps or other practical way to secure and support
the workpiece to a stable platform. Holding the work by hand
or against your body is unstable and may lead to loss of control.
• Do not force tool. Use the correct tool for your application.
The correct tool will do the job better and safer at the rate for
which it is designed.
• Do not use tool if switch does not turn it on or off. Any tool
that cannot be controlled with the switch is dangerous and
must be repaired.
• Disconnect the plug from the power source before making
any adjustments, changing accessories, or storing the
tool. Such preventative safety measures reduce the risk of
starting the tool accidentally.
• Store idle tools out of reach of children and other untrained
persons. Tools are dangerous in the hands of untrained users.
• Maintain tools with care. Keep cutting tools sharp and
clean. Properly maintained tools, with sharp cutting edges are
less likely to bind and are easier to control.
• Check for misalignment or binding of moving parts, break-
age of parts, and any other condition that may affect the
tools operation. If damaged, have the tool serviced before
using. Many accidents are caused by poorly maintained tools.
• Use only accessories that are recommended by the manu-
facturer for your model. Accessories that may be suitable for
one tool, may become hazardous when used on another tool.
SERVICE
• Tool service must be performed only by qualified repair
personnel. Service or maintenance performed by unqualified
personnel could result in a risk of injury.
• When servicing a tool, use only identical replacement
parts. Follow instructions in the Maintenance section of
this manual. Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of electric shock or
injury.
Additional Specific Safety Instructions
for Grinders
• Always use proper guard with grinding wheel. A guard pro-
tects operator from broken wheel fragments and wheel contact.
• Accessories must be rated for at least the speed recom-
mended on the tool warning label. Wheels and other acces-
sories running over rated speed can fly apart and cause injury.
Accessory ratings must be above listed minimum wheel speed
as shown on tool nameplate.
• Hold tool by insulated gripping surfaces when performing
an operation where the cutting tool may contact hidden
Produktspecifikationer
| Varumärke: | DeWalt |
| Kategori: | Slipmaskin |
| Modell: | DW802 |
Behöver du hjälp?
Om du behöver hjälp med DeWalt DW802 ställ en fråga nedan och andra användare kommer att svara dig
Slipmaskin DeWalt Manualer
4 Januari 2025
31 December 2025
7 Oktober 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
23 September 2024
23 September 2024
Slipmaskin Manualer
- Slipmaskin Bosch
- Slipmaskin AEG
- Slipmaskin Adler
- Slipmaskin Aquapur
- Slipmaskin Silverline
- Slipmaskin Toolland
- Slipmaskin Ferm
- Slipmaskin Ozito
- Slipmaskin Gude
- Slipmaskin Gorenje
- Slipmaskin Silvercrest
- Slipmaskin Makita
- Slipmaskin Tryton
- Slipmaskin Hitachi
- Slipmaskin Black And Decker
- Slipmaskin Vonroc
- Slipmaskin Maestro
- Slipmaskin Stanley
- Slipmaskin Skil
- Slipmaskin Hyundai
- Slipmaskin Yato
- Slipmaskin Hilti
- Slipmaskin Ryobi
- Slipmaskin Profitec
- Slipmaskin Festool
- Slipmaskin Metabo
- Slipmaskin United Office
- Slipmaskin Parkside
- Slipmaskin Worx
- Slipmaskin Meec Tools
- Slipmaskin Milwaukee
- Slipmaskin Hikoki
- Slipmaskin Mesko
- Slipmaskin Dremel
- Slipmaskin ABB
- Slipmaskin Hazet
- Slipmaskin Einhell
- Slipmaskin Baumr-AG
- Slipmaskin Husqvarna
- Slipmaskin Maktec
- Slipmaskin Steren
- Slipmaskin Bort
- Slipmaskin Tanaka
- Slipmaskin Craftsman
- Slipmaskin Yamato
- Slipmaskin Malmbergs
- Slipmaskin Power Craft
- Slipmaskin Powerplus
- Slipmaskin Porter-Cable
- Slipmaskin Cotech
- Slipmaskin Genesis
- Slipmaskin Bunn
- Slipmaskin Eibenstock
- Slipmaskin Scheppach
- Slipmaskin Gamma
- Slipmaskin Kress
- Slipmaskin Bavaria
- Slipmaskin Dolmar
- Slipmaskin Flex
- Slipmaskin Duro
- Slipmaskin Nuova Simonelli
- Slipmaskin Kawasaki
- Slipmaskin Fieldmann
- Slipmaskin Pattfield
- Slipmaskin Defort
- Slipmaskin Truper
- Slipmaskin Solo
- Slipmaskin Bruder Mannesmann
- Slipmaskin Cocraft
- Slipmaskin Meister Craft
- Slipmaskin Toolcraft
- Slipmaskin RIDGID
- Slipmaskin Batavia
- Slipmaskin Proxxon
- Slipmaskin Westfalia
- Slipmaskin Holzmann
- Slipmaskin Fein
- Slipmaskin Black Decker
- Slipmaskin Stomer
- Slipmaskin Dolmar(Makita)
- Slipmaskin Goon
- Slipmaskin Sthor
- Slipmaskin Ergofix
- Slipmaskin Global
- Slipmaskin Neo
- Slipmaskin Graphite
- Slipmaskin Rikon
- Slipmaskin Duro Pro
- Slipmaskin Victoria Arduino
- Slipmaskin Alpha Tools
- Slipmaskin Felisatti
- Slipmaskin SW-Stahl
- Slipmaskin ATI-ZDL
- Slipmaskin Cleco
- Slipmaskin Gude Pro
- Slipmaskin Einhell Bavaria
- Slipmaskin McKenzie
- Slipmaskin Proviel
- Slipmaskin Gladiator
- Slipmaskin Rodcraft
- Slipmaskin Bavaria By Einhell
- Slipmaskin Chicago Pneumatic
- Slipmaskin Mirka
- Slipmaskin Classic Power
- Slipmaskin Handwerk
Nyaste Slipmaskin Manualer
8 Januari 2025
6 Januari 2025
1 Januari 2025
31 December 2025
31 December 2025
31 December 2025
29 December 2024
29 December 2024
28 December 2024
28 December 2024