DeWalt DW866 Bruksanvisning

DeWalt Sågmaskin DW866

Läs nedan 📖 manual på svenska för DeWalt DW866 (27 sidor) i kategorin Sågmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/27
DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 Printed in U.S.A. (JUN98-CD-1) Form No. 384621-01
DW866 Copyright © 1998
384621-01/DW866 1/8/02 2:27 PM Page 2
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA. LÉASE ESTE INSTRUCTIVO ANTESADVERTENCIA:
DE USAR EL PRODUCTO.
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
DW866
12” (105mm) Cut-off Machine
Machine à tronçonner de 105 mm (12 po)
Máquina cortadora de 105 mm (12”)Máquina cortadora de 105 mm (12”)
384621-01/DW866 1/8/02 2:27 PM Page 3
ELECTRICAL SAFETY
• Grounded tools must be plugged into an outlet properly
installed and grounded in accordance with all codes and
ordinances. Never remove the grounding prong or modify the
plug in any way. Do not use any adapter plugs. Check with a
qualified electrician if you are in doubt as to whether the outlet
is properly grounded. If the tools should electrically malfunction or
break down, grounding provides a low resistance path to carry
electricity away from the user.
•Double insulated tools are equipped with a polarized plug (one
blade is wider than the other.) This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified
electrician to install a polarized outlet. Do not change the plug
in any way. Double insulation eliminates the need for the three
wire grounded power cord and grounded power supply system.
•Avoid body contact with grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of
electric shock if your body is grounded.
•Don’t expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
•Do not abuse the cord. Never use the cord to carry the tools or
pull the plug from an outlet. Keep cord away from heat, oil,
sharp edges or moving parts. Replace damaged cords
immediately. Damaged cords increase the risk of electric shock.
•When operating a power tool outside, use an outdoor
extension cord marked “W-A” or “W.” These cords are rated for
outdoor use and reduce the risk of electric shock. When using an
extension cord, be sure to use one heavy enough to carry the
current your product will draw. An undersized cord will cause a drop
in line voltage resulting in loss of power and overheating. The
following table shows the correct size to use depending on cord
length and nameplate ampere rating. If in doubt, use the next
heavier gage. The smaller the gage number, the heavier the cord.
English
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
OR ANY DEWALT TOOL, CALL US TOLL FREE AT:
1-800-4-DEWALT (1-800-433-9258)
General Safety Rules
WARNING! Read and understand all instructions. Failure to
follow all instructions listed below may result in electric shock, fire
and/or serious personal injury.
SAVE THESE INSTRUCTIONS
WARNING: Improper connection of the equipment grounding
conductor can result in the risk of electric shock. Check with a
qualified electrician or service person if you are in doubt as to
whether the outlet is properly grounded. Do not modify the plug
provided with the appliance. If it will not fit the outlet, a proper outlet
must be installed by a qualified electrician.
We recommend that you never disassemble the tool or try to do any
rewiring in the electrical system. Any repairs should be performed
only by authorized service centers. Should you be determined to
make a repair yourself, remember that the green colored wire is the
grounding wire. Never connect this green wire to a live terminal. If
you replace the plug on the power cord, be sure to connect the green
wire only to the grounding (longest) prong on a three-prong plug.
Never remove the grounding prong.
WORK AREA
•Keep your work area clean and well lit. Cluttered benches and
dark areas invite accidents.
•Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases, or dust. Power
tools create sparks which may ignite the dust or fumes.
•Keep bystanders, children, and visitors away while operating a
power tool. Distractions can cause you to lose control.
384621-01/DW866 1/8/02 2:27 PM Page 4

Produktspecifikationer

Varumärke: DeWalt
Kategori: Sågmaskin
Modell: DW866

Behöver du hjälp?

Om du behöver hjälp med DeWalt DW866 ställ en fråga nedan och andra användare kommer att svara dig


Sågmaskin DeWalt Manualer

DeWalt

DeWalt DCS383 Bruksanvisning

12 Februari 2025
DeWalt

DeWalt DCCS621 Bruksanvisning

3 Januari 2025
DeWalt

DeWalt DCPS671 Bruksanvisning

3 Januari 2025
DeWalt

DeWalt DCS590 Bruksanvisning

3 Januari 2025
DeWalt

DeWalt DWM120 Bruksanvisning

2 Oktober 2024
DeWalt

DeWalt DW309K Bruksanvisning

30 September 2024
DeWalt

DeWalt DW317 Bruksanvisning

30 September 2024
DeWalt

DeWalt DW861 Bruksanvisning

26 September 2024
DeWalt

DeWalt DCS397 Bruksanvisning

24 September 2024
DeWalt

DeWalt DWE249 Bruksanvisning

24 September 2024

Sågmaskin Manualer

Nyaste Sågmaskin Manualer

Alpina

Alpina APR 26 Bruksanvisning

22 Mars 2025
Gamma

Gamma HCZ2-85 Bruksanvisning

11 Mars 2025
Stiga

Stiga PR 100e Bruksanvisning

10 Mars 2025
Baumr-AG

Baumr-AG SW1 Bruksanvisning

10 Mars 2025
Bosch

Bosch EasyChain 18V-15-7 Bruksanvisning

28 Februari 2025
Worx

Worx Nitro WX501 Bruksanvisning

26 Februari 2025
EGO

EGO PSX2510 Bruksanvisning

6 Februari 2025
Hilti

Hilti WSR 1400-PE Bruksanvisning

4 Februari 2025
Craftsman

Craftsman CMCPS630 Bruksanvisning

10 Januari 2025
Husqvarna

Husqvarna 455e Rancher Bruksanvisning

8 Januari 2025