DeWalt DW935K Bruksanvisning

DeWalt Sågmaskin DW935K

Läs nedan 📖 manual på svenska för DeWalt DW935K (46 sidor) i kategorin Sågmaskin. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/46

INSTRUCTION MANUAL

GUIDE D’UTILISATION

MANUAL DE INSTRUCCIONES

DW930/DW935/DW936/DW939

Cordless Circular Saws

Scie circulaire sans fil

Sierras circulares inalámbricas

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA

DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES

DE USAR EL PRODUCTO.

Questions? See us in the World Wide Web at www.dewalt.com

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS

OR ANY DEWALT TOOL, CALL US TOLL FREE AT:

1-800-4-DEWALT (1-800-433-9258)

General Safety Rules – For All Battery

Operated Tools

WARNING! Read and understand all instructions. Failure to follow

all instructions listed below may result in electric shock, fire and/or

serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA

•

Keep your work area clean and well lit. Cluttered benches and

dark areas invite accidents.

•

Do not operate power tools in explosive atmospheres, such

as in the presence of flammable liquids, gases, or dust. Power

tools create sparks which may ignite the dust or fumes.

•

Keep bystanders, children, and visitors away while operating

a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

•

Do not abuse the cord. Never use the cord to carry the tool.

Keep cord away from heat, oil, sharp edges or moving parts.

Replace damaged cords immediately

Damaged cords may

create a fire.

•

A battery operated tool with integral batteries or a separate

battery pack must be recharged only with the specified

charger for the battery. A charger that may be suitable for one

type of battery may create a risk of fire when used with another

battery.

•

Use battery operated tool only with the specifically

designated battery pack. Use of any other batteries may create a

risk of fire.

English

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR

ANY DEWALT TOOL, CALL US TOLL FREE AT:

1-800-4-DEWALT (1-800-433-9258)

SWITCH LOCK OFF

BUTTON

BATTERY

PACK

SHOE

TRIGGER

SWITCH

DEPTH

ADJUSTMENT

KNOB

LOWER

GUARD

RETRACTING

LEVER

LOWER

GUARD

BLADE LOCK

BUTTON

BEVEL

ADJUSTMENT

KNOB

KERF

INDICATOR

BLADE CLAMPING

SCREW

DW930 12.0 Volt Cordless Trim Saw 2500 RPM

DW935 14.4 Volt Cordless Trim Saw 3000 RPM

DW936 18.0 Volt Cordless Trim Saw 3200 RPM

DW939 18.0 Volt Cordless Circular Saw 3700 RPM

DW935 shown

English

PERSONAL SAFETY

•

Stay alert, watch what you are doing and use common sense

when operating a power tool. Do not use tool while tired or

under the influence of drugs, alcohol, or medication. A

moment of inattention while operating power tools may result in

serious personal injury,

•

Dress properly. Do not wear loose clothing or jewelry. Contain

long hair. Keep your hair, clothing, and gloves away from

moving parts. Loose clothing, jewelry, or long hair can be caught

in moving parts. Air vents often cover moving parts and should also

be avoided.

•

Avoid accidental starting. Be sure switch is in the locked or

off position before inserting battery pack. Carrying tools with

your finger on the switch or inserting the battery pack into a tool

with the switch on invites accidents.

•

Remove adjusting keys or wrenches before turning the tool

on. A wrench or a key that is left attached to a rotating part of the

tool may result in personal injury.

•

Do not overreach. Keep proper footing and balance at all

times. Proper footing and balance enables better control of the tool

in unexpected situations.

•

Use safety equipment. Always wear eye protection. Dust mask,

non-skid safety shoes, hard hat, or hearing protection must be

used for appropriate conditions.

TOOL USE AND CARE

•

Use clamps or other practical way to secure and support the

workpiece to a stable platform. Holding the work by hand or

against your body is unstable and may lead to a loss of control.

•

Do not force tool. Use the correct tool for your application.

The correct tool will do the job better and safer at the rate for which

it is designed.

•

Do not use tool if switch does not turn it on or off. A tool that

cannot be controlled with the switch is dangerous and must be

repaired.

•

Disconnect battery pack from tool or place the switch in the

locked or off position before making any adjustments,

changing accessories, or storing the tool. Such preventative

safety measures reduce the risk of starting the tool accidentally.

•

Store idle tools out of reach of children and other untrained

persons. Tools are dangerous in the hands of untrained users.

•

When battery pack is not in use, keep it away from other metal

objects like: paper clips, coins, keys, nails, screws, or other

small metal objects that can make a connection from one

terminal to another. Shorting the battery terminals together may

cause sparks, burns, or a fire.

•

Maintain tools with care. Keep cutting tools sharp and clean.

Properly maintained tools with sharp cutting edges are less likely

to bind and are easier to control.

•

Check for misalignment or binding of moving parts, breakage

of parts, and any other condition that may affect the tools

operation. If damaged, have the tool serviced before using.

Many accidents are caused by poorly maintained tools.

•

Use only accessories that are recommended by the

manufacturer for your model. Accessories that may be suitable

for one tool, may create a risk of injury when used on another tool.

SERVICE

•

Tool service must be performed only by qualified repair

personnel. Service or maintenance performed by unqualified

personnel may result in a risk of injury.

•

When servicing a tool, use only identical replacement parts.

Follow instructions in the Maintenance section of this manual.

Use of unauthorized parts or failure to follow Maintenance

Instructions may create a risk of shock or injury.

Additional Safety Rules for Circular

Saws

DANGER: Keep hands away from cutting area and blade. Keep

your second hand on auxiliary handle or motor housing. If both

hands are holding the saw, they cannot be cut by the blade.

Produktspecifikationer

Varumärke:	DeWalt
Kategori:	Sågmaskin
Modell:	DW935K
Blåtand:	Oui
Couleur du produit:	Noir
Typ av produkt:	Casque
Profondeur du colis:	35 mm
Hauteur du colis:	175 mm
Poids du paquet:	60 g
Teknik batteri:	Lithium Polymère (LiPo)
Largeur:	16 mm
Profondeur:	22 mm
Hauteur:	36 mm
Bärbara headset stil:	Crochets auriculaires
Typ hjälm:	Binaural
Technologie de connectivité:	Sans fil
Connectivité USB:	Non
Bluetooth-modell:	4.2
Profiler Bluetooth:	A2DP, HFP, HSP
Räckvidd för trådlös router:	10 m
Öronkoppling:	Intra-aural
Brusreducerande-mikrofon:	Non
Laddar källa:	USB
Autonomie en veille:	168 h
Poids:	29 g
Guide de démarrage rapide:	Oui
Câbles inclus:	USB
Quantité:	1
Antal produkter som ingår:	1 pièce(s)
Largeur du colis:	50 mm
3,5-mm-kontakt:	Non
Bruttovikt av huvudskåpet (externt):	3000 g
Temps de communication:	5 h
Laddningsbart-batteri:	Oui
Type d'emballage:	Carton
Bruttovikt (innerkartong):	0.426 kg
Bruttovikt (kartong/extern):	3 kg
Nettovikt (innerkartong):	0.192 kg
Nettovikt (kartong/extern):	1.152 kg
Kvantitet (innerkartong):	6 pièce(s)
Kvantitet (låda/extern):	36 pièce(s)
Tomvikt (innerkartong):	0.234 kg
Tomvikt (extern kartong):	1.848 kg
Höjd (cm) (innerkartong):	11.5 cm
Höjd (cm) (kartong/extern):	25 cm
Längd (cm) (innerkartong):	21 cm
Längd (cm) (kartong/extern):	37 cm
Bredd (cm) (innerkartong):	11.7 cm
Bredd (cm) (kartong/extern):	22.5 cm
Typ av hyllplats:	Les deux
Förpackningens-taravikt:	28 g
2,5-mm-kontakt:	Non