DeWalt DWMT70786 Bruksanvisning
Läs nedan 📖 manual på svenska för DeWalt DWMT70786 (47 sidor) i kategorin Hamer. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/47
DWMT70786L
3/8" Reversible Drill
Perceuse réversible 9,5 mm (3/8 po)
Taladro reversible de 9,5 mm (3/8")
INSTRUCTION MANUAL
GUIDE D’UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES
DE USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-DeWALT • www.dewalt.com
2
English
A. Chuck (keyless)
B. Trigger
C. Forward/Reverse Switch
D. Handle
E. ¼" Air Inlet
DWMT70786L 3/8" REVERSIBLE
DRILL
F. Shock Resistant Housing
Bumpers
G. Exhaust
FIG.1
B
A
C
D
E
F
G
E
SPECIFICATIONS
MODEL DWMT70786L
FREE SPEED (@90PSI)
2100 RPM
EXHAUST TYPE
Handle
CHUCK TYPE
Keyless
CHUCK CAPACITY
3/8" (10MM)
AVERAGE AIR CONSUMPTION AT
LOAD
30 SCFM (14.2 L/s)
4.3 CFM (2.0 L/s)
NET WEIGHT
2.6 LBS (1.2Kg.)
AIR INTLET SIZE
1/4” NPT(F)
RECOMMENDED HOSE SIZE
3/8” (10MM)
MAX. AIR PRESSURE
90 PSI
3
English
Denitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, result in will death
or serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, result in could death
or serious injury.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, result in may minor
or moderate injury.
CAUTION: Used without the safety alert symbol
indicates a potentially hazardous situation which,
if not avoided, result in may property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT
THIS OR ANY D
e
WALT TOOL, CALL US TOLL FREE AT:
1-800-4-D
e
WALT (1-800-433-9258)
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Some dust created by power sanding, sawing,
grinding, drilling, and other construction activities contains chemicals
known to the State of California to cause cancer, birth defects or
other reproductive harm. Some example of these chemicals are:
• Leadfromlead-basedpaints
• Crystallinesilicafrombricksandcement
and other masonry products
• Arsenicandchromiumfromchemically-treatedlumber
Your risk from these exposures varies, depending on how often you
do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety
equipment, al ways wear approved, OSHA/MSHA/NIOSH
properly fit ting face mask or res pi ra tor when us ing such tools.
When using air tools, basic safety precautions should always be
followed to reduce the risk of personal injury.
WARNING: This product contains chemicals, known to the
State of California to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
SAVE THESE INSTRUCTIONS
WARNING:
Improper operation or maintenance of this product
could result in serious injury and property damage.
Read and understand all warnings and operating
instructions before using this equipment. When using
air tools, basic safety precautions should always be
followed to reduce the risk of personal injury.
WARNING:
Read and understand this instruction manual and tool labels
before installing, operating or servicing this tool. Keep these
instructions in a safe accessible place.
Operators and others in work area must wear ANSI Z87.1 CAN/
CSA Z94.3 approved safety glasses with side shields.
Operators and others in work area must wear ear protection.
Oil daily for optimal performance.
Produktspecifikationer
| Varumärke: | DeWalt |
| Kategori: | Hamer |
| Modell: | DWMT70786 |
Behöver du hjälp?
Om du behöver hjälp med DeWalt DWMT70786 ställ en fråga nedan och andra användare kommer att svara dig
Hamer DeWalt Manualer
15 Februari 2025
3 Oktober 2024
29 September 2024
26 September 2024
24 September 2024
24 September 2024
23 September 2024
23 September 2024
19 September 2024
18 September 2024
Hamer Manualer
- Hamer Bosch
- Hamer AEG
- Hamer Ferm
- Hamer Ozito
- Hamer Gude
- Hamer Makita
- Hamer Hitachi
- Hamer Black And Decker
- Hamer Stanley
- Hamer Skil
- Hamer Ronix
- Hamer Hilti
- Hamer Taurus
- Hamer Metabo
- Hamer Milwaukee
- Hamer Hikoki
- Hamer Einhell
- Hamer Craftsman
- Hamer Power Craft
- Hamer Powerplus
- Hamer Porter-Cable
- Hamer Trotec
- Hamer Topcraft
- Hamer Powerfix
- Hamer Bavaria
- Hamer Fieldmann
- Hamer Cocraft
- Hamer Goon
- Hamer Anova
- Hamer Global
- Hamer King Craft
- Hamer Full Boar
- Hamer Wiha
- Hamer Alpha Tools
- Hamer Toolson
- Hamer Robust
- Hamer Einhell Bavaria
- Hamer Ergotools Pattfield
- Hamer MyTool
- Hamer McKenzie
- Hamer Proviel
- Hamer Bavaria By Einhell
- Hamer Prowork
- Hamer XU1
- Hamer Workzone Titanium
- Hamer CMI
- Hamer Kraftronic
Nyaste Hamer Manualer
2 April 2025
2 April 2025
2 April 2025
2 April 2025
30 Mars 2025
29 Mars 2025
29 Mars 2025
29 Mars 2025
29 Mars 2025
27 Mars 2025