DeWalt DWS716XPS Bruksanvisning

DeWalt Sågmaskin DWS716XPS

Läs nedan 📖 manual på svenska för DeWalt DWS716XPS (44 sidor) i kategorin Sågmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/44
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-D WALTe
Instruction Manual
Guide Dutilisation
Manual de instrucciones
Final Page Size: 8.5 x 11in
DWS716, DWS716XPS
12" (305 mm) Double Bevel Compound Miter Saw
Scie à onglets combinée à biseau double 305 mm (12po)
Sierra de Inglete Compuesta de Doble Bisel de 305 mm (12")
English (original instructions) 1
Français (traduction de la notice d’instructions originale) 14
Español (traducido de las instrucciones originales) 28
1
ENGLISH
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage.
DANGER: will Indicates an imminently hazardous situation which, if not avoided, result in death or seriousinjury.
WARNING: could Indicates a potentially hazardous situation which, if not avoided, result in death or seriousinjury.
CAUTION: may Indicates a potentially hazardous situation which, if not avoided, result in minor or moderateinjury.
(Used without word) Indicates a safety related message.
NOTICE: may propertydamage Indicates a practice which, if not avoided, not related to personal injury result in .
Fig. A
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
seriousinjury.
WARNING: To reduce the risk of injury, read the
instructionmanual.
If you have any questions or comments about this or any
D WALTe
tool, call us toll free at:
1-800-4-
D WALTe
(1-800-433-9258).
1 Trigger switch
2 Operating handle
3 Mounting holes
4 Lower guard
5 Miter lock lever
6 Miter detent trigger
7 Miter scale
8 Miter scale screws
9 Hand indentations
10 Sliding fence
11 Bevel lock knob
12 Dust port
13 Carrying handle
14 Fence lock knob
15 Clamp mounting hole
16 6 mm hex wrench
17 Head lock pin
18 Base fence
19 45° bevel stop adjustment screw
20 45° bevel stop override levers
21 Vertical material clamp
22 Miter detent override
23 CUTLINE LED On/Off switch
(DWS716XPS only)
3
3
3
3
1
2
4
4
2
567
8
8
13
13
21
21
9
9
14
14
15
15
15
18
20
19
10
10
11
16
17
12
22
23
DWS716XPS

Produktspecifikationer

Varumärke: DeWalt
Kategori: Sågmaskin
Modell: DWS716XPS

Behöver du hjälp?

Om du behöver hjälp med DeWalt DWS716XPS ställ en fråga nedan och andra användare kommer att svara dig




Sågmaskin DeWalt Manualer

Sågmaskin Manualer

Nyaste Sågmaskin Manualer