DeWalt DXIG3600E Bruksanvisning
Läs nedan 📖 manual på svenska för DeWalt DXIG3600E (27 sidor) i kategorin Generator. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/27
DEWALT Industrial Tool Co., 701 Joppa Road, Baltimore, MD 21286 Printed in Italy (OCT97-1) Form No. 328494
DW677,DW678 Copyright © 1997
DW678,680/328494-01 1/13/00 11:24 AM Page 2
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
DW677, DW678, DW680
3 1/4” (82mm) Heavy Duty Planers
Raboteuses service intensif 82 mm (3 1/4 po)
Cepillos de 82 mm (3 1/4”) para trabajo pesado
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA. LÉASE ESTE INSTRUCTIVOADVERTENCIA:
ANTES DE USAR EL PRODUCTO.
DW678,680/328494-01 1/13/00 11:24 AM Page 3
• Avoid body contact with grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of
electric shock if your body is grounded.
• Don’t expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord to carry the tools or
pull the plug from an outlet. Keep cord away from heat, oil,
sharp edges or moving parts. Replace damaged cords
immediately. Damaged cords increase the risk of electric shock.
• When operating a power tool outside, use an outdoor
extension cord marked “W-A” or “W.” These cords are rated for
outdoor use and reduce the risk of electric shock.
Recommended Minimum Wire Size for Extension Cords
Total Length of Cord
25 ft. 50 ft. 75 ft. 100 ft. 125 ft. 150 ft. 175 ft.
7.6 m 15.2 m 22.9 m 30.5 m 38.1 m 45.7 m 53.3 m
Wire Size
18 AWG 18 AWG 16 AWG 16 AWG 14 AWG 14 AWG 12 AWG
PERSONAL SAFETY
• Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use tool while tired or
under the influence of drugs, alcohol, or medication. A moment
of inattention while operating power tools may result in serious
personal injury,
• Dress properly. Do not wear loose clothing or jewelry. Contain
long hair. Keep your hair, clothing , and gloves away from
moving parts. Loose clothes, jewelry, or long hair can be caught in
moving parts.
• Avoid accidental starting. Be sure switch is off before plugging
in. Carrying tools with your finger on the switch or plugging in tools
that have the switch on invites accidents.
• Remove adjusting keys or wrenches before turning the tool on.
General Safety Instructions
WARNING! Read and understand all instructions. Failure to
follow all instructions listed below, may result in electric shock, fire
and/or serious personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA
• Keep your work area clean and well lit. Cluttered benches and
dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases, or dust.
Power tools create sparks which may ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operating
a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
• Grounded tools must be plugged into an outlet properly
installed and grounded in accordance with all codes and
ordinances. Never remove the grounding prong or modify the
plug in any way. Do not use any adaptor plugs. Check with a
qualified electrician if you are in doubt as to whether the
outlet is properly grounded. If the tools should electrically
malfunction or break down, grounding provides a low resistance
path to carry electricity away from the user. Applicable only to
Class I (Grounded ) tools.
• Double insulated tools are equipped with a polarized plug
(one blade is wider than the other.) This plug will fit in a
polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install a polarized outlet. Do not
change the plug in any way. Double insulation eliminates the
need for the three wire grounded power cord and grounded power
supply system. Applicable only to Class II (Double Insulated)
tools.
English
DW678,680/328494-01 1/13/00 11:24 AM Page 4
Produktspecifikationer
| Varumärke: | DeWalt |
| Kategori: | Generator |
| Modell: | DXIG3600E |
Behöver du hjälp?
Om du behöver hjälp med DeWalt DXIG3600E ställ en fråga nedan och andra användare kommer att svara dig
Generator DeWalt Manualer
10 Oktober 2024
26 September 2024
26 September 2024
23 September 2024
23 September 2024
31 Juli 2024
27 Juli 2024
25 Juli 2024
Generator Manualer
- Generator Bosch
- Generator Braun
- Generator Philips
- Generator Honeywell
- Generator Vetus
- Generator Eurom
- Generator Generac
- Generator Subaru
- Generator Gude
- Generator Makita
- Generator Domo
- Generator Rowenta
- Generator Stanley
- Generator Hyundai
- Generator Westinghouse
- Generator Moulinex
- Generator Taurus
- Generator Parkside
- Generator Sun Joe
- Generator Einhell
- Generator Voltcraft
- Generator Craftsman
- Generator Powerplus
- Generator Trotec
- Generator Scheppach
- Generator Honda
- Generator Bavaria
- Generator Gys
- Generator Zipper
- Generator Harvia
- Generator Defort
- Generator Superior
- Generator Fuxtec
- Generator Truper
- Generator Cleanmaxx
- Generator Cocraft
- Generator Cecotec
- Generator Herkules
- Generator Toolcraft
- Generator Lumag
- Generator Telair
- Generator Endress
- Generator GW Instek
- Generator EcoFlow
- Generator Powerspot
- Generator Black Decker
- Generator SRS
- Generator Bluetti
- Generator Anova
- Generator Global
- Generator King Craft
- Generator AudioControl
- Generator Duromax
- Generator CrossTools
- Generator Jackery
- Generator Lifan
- Generator Rigol
- Generator Cleveland
- Generator Joy-it
- Generator Full Boar
- Generator Duro Pro
- Generator Alpha Tools
- Generator Powerkick
- Generator Könner & Söhnen
- Generator Load Up
- Generator PowerTech
- Generator Woods
- Generator Stromkraft
- Generator ITC Power
- Generator MSW
- Generator Ribimex
- Generator Powerhouse
- Generator Arvey
- Generator Tektronix
- Generator PRAMAC
- Generator DuroStar
- Generator ThermaSol
Nyaste Generator Manualer
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
26 Oktober 2024
17 Oktober 2024
12 Oktober 2024
3 Oktober 2024
2 Oktober 2024
1 Oktober 2024