DeWalt DXIRFFP210 Bruksanvisning

Läs nedan 📖 manual på svenska för DeWalt DXIRFFP210 (8 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
1
INSTRUCTION MANUAL
DXIRFFP32
DXIRFFP35
DXIRFFP310
DXIRFFP22
DXIRFFP25
DXIRFFP210
2
EN - Humidity of storage conditions
DE - Feuchtigkeitsbedingungen bei der Lagerung
ES - Humedad de las condiciones de almacenamiento
FR - Humidité de stockage
IT - Umidità in condizioni di stoccaggio
EN - Storage temperature
DE - Lagertemperatur
ES - Temperatura de almacenamiento
FR - Température de stockage
IT - Temperatura di conservazione
EN - Expiry Date:
DE - Verfallsdatum:
ES - Fecha de caducidad:
FR - Date d’expiration:
IT - Data di scadenza:
EN - CE2797
DE - CE2797
ES - CE2797
FR - CE2797
IT - CE2797
EN - UKCA0086
DE - UKCA0086
ES - UKCA0086
FR - UKCA0086
IT - UKCA0086
EN - See user information before use.
DE - Vor der Verwendung Benutzerinformationen lesen.
ES - Consulte la información para el usuario antes de usar el producto.
FR - Consultez les informations destinées à l’utilisateur avant toute utilisation.
IT - Leggere le informazioni utente prima dell’uso.
1
2
3
4
5
+50
-10
<75%
yyyy/mm
2797
3
EN - RESPIRATOR FITTING INSTRUCTIONS
STEP 1
Hold the DEWALT respirator in one hand with the nosepiece at your
fingertips, allowing the top headband to hang freely. Hold the bottom
headband above the respirator with your other hand.
STEP 2
Pull the bottom headband over your head and position below your
ears. Press the DEWALT respirator firmly against your face with the
nosepiece over the bridge of your nose.
STEP 3
Stretch and position the top headband high on the back of the head.
Pull on the ends of the straps to tighten and achieve the required fit.
STEP 4
Using both hands, mould the nosepiece to the shape of your nose.
STEP 5
To testt:
a) Cup both hands over the DEWALT respirator being careful not to
disturb the position, and b) inhale vigorously. If air leaks around
the edges, reposition the straps or adjust the strap tension where
applicable for a better fit.
If there are still noticeable leaks, then this mask may not be suitable
for you, and we advise you to seek another style from the DEWALT
range.
Caution: The DEWALT respirator should be fit checked prior to each
time it is worn.
Type-examination (Module B) by: BSI Group The Netherlands B.V. (NB
2797) Say Building, John M. Keynesplein 9, 1066 EP Amsterdam,
Netherlands.
Conformity to type (Module D) by: BSI Group The Netherlands
B.V. (NB 2797) Say Building, John M. Keynesplein 9, 1066 EP
Amsterdam, Netherlands.
UKCA type-examination (Module B) by: BSI Group UK (AB0086) Davy
Avenue Knowlhill, Milton Keynes, MK5 8PP, United Kingdom
UKCA conformity to type (Module D) by: BSI Group UK (AB0086)
Davy Avenue Knowlhill, Milton Keynes, MK5 8PP, United Kingdom
LOT NO. / MFG Date:
NR -For Single Shift Use Only
Maximum of 8 Hours Usage
D - Dolomite tested
For use against solid & liquid aerosols.
See information supplied by the manufacturer.
EU declaration of conformity present on the website www.dewalt.
com PPE Regulation (EU) 2016/425
WARNING
Please read and understand before use.
1. A properly selected respirator is essential to protect your health.
Before using this product consult a safety professional to determine
its suitability for your intended application.
2. As with any respiratory device, the wearer MUST be adequately
trained prior to use. Before use, the wearer should always check
the mask is in good condition no dirt, no damage to headstrap
attachment etc.
3. This product does not protect the wearer against gases,
vapours or mist whose liquids produce harmful vapours or gases.
4. Do not use in sandblasting operations.
5.This product does not supply oxygen. Use this respirator only in
well-ventilated areas containing sufficient oxygen (at least 19.5%)
to support life.
6. Do not use when the contaminant and the concentration are
unknown or immediately dangerous to life and health.
7. Leave the work area immediately if: a) breathing becomes
difcult, b) dizziness or other distress, c) the respirator becomes
damaged or d) an emergency occurs.
8. If the user experiences any illness or discomfort, consult a
licensed medical doctor to determine suitability of use.
9. Facial hair and certain facial characteristics will prohibit the
effective use of this product.
10. Replace the respirator when the breathing resistance becomes
excessive due to dust loading or after a maximum of 8 hours
continuous usage, “single shift use”.
11. Failure to observe all warnings and instructions on the use of
this respirator may result in serious illness or permanent injury.
12. The equipment should not act as an ignition source, and it
should not be used in explosive atmospheres as the concentration
of contaminants within the normal flammability range would exceed
the limits in the selection guide.
13. Store the respirator in a sealed container away from
contaminated areas when not in use.
14. Store the respirator in the original packaging during
transportation.
15. Please make sure the mask fits property before entering the
working environment.
WARRANTY
Gentex warrants that this Product will be free from defects in material
or workmanship under normal use and service for a period of one
(1) year from the date of delivery when installed properly and used
normally and in accordance with written operating instructions, if
any (“Limited Warranty”). All repair covered by this Limited Warranty
shall be performed at Gentex’s factory, or other such warranty
repair facilities of Gentex as designated by Gentex unless Gentex
specifically directs that repair services be performed at another
location. All Products returned under this Limited Warranty must be
returned within sixty (60) days of generation of a Return Material
Authorization (RMA) by Gentex. Any defect corrected and found to be
within this scope of the Limited Warranty will be repaired by Gentex
and all charges for labor and material will be borne by Gentex. If it
is determined that either no fault exists in Gentex, or the damage
to be repaired was caused by your negligence or the negligence of
your agents, employees or customers you agree to pay all charges
associated with each such repair and shipping costs. No statement,
recommendation or assistance made or offered by Gentex through
its representatives to you, your agents, employees, or customers in
connection with the purpose or intended use of any Gentex product
shall be or constitute a waiver by Gentex of any of the provisions of
this Limited Warranty or change Gentex’s liability under this Limited
Warranty.
EXCEPT AS SET FORTH IN THE LIMITED WARRANTY CONTAINED
HEREIN, YOU TAKE THE PRODUCT “AS IS”. THERE ARE NO EXPRESS
OR IMPLIED WARRANTIES OR CONDITIONS BEYOND THOSE
STATED IN THIS LIMITED WARRANTY. GENTEX DISCLAIMS ALL
OTHER WARRANTIES AND CONDITIONS, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TO
THE FULLEST EXTENT PERMISSIBLE BY LAW, GENTEX SHALL NOT BE
LIABLE FOR ANY INJURY OR DAMAGE TO PERSONS OR PROPERTY
OF ANY KIND, OR FROM ANY LOSS OF TIME, INCONVENIENCE,
OR LOSS OF USE, INCLUDING ANY CONSEQUENTIAL, INCIDENTAL
OR SPECIAL DAMAGES ARISING DIRECTLY OR INDIRECTLY OUT
OF OR IN CONNECTION WITH THE USE, INSTALLATION AND/OR
PERFORMANCE OF THE PRODUCTS, EVEN IF GENTEX HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
DECLARATION OF CONFORMITY
EU declaration of conformity present on the website:
www.dewalt.com PPE Regulation (EU) 2016/425
UKCA declaration of conformity present on the website:
www.dewalt.com Regulation 2016/425 on personal protective
equipment as brought into UK law and amended (for UKCA)

Produktspecifikationer

Varumärke: DeWalt
Kategori: Inte kategoriserad
Modell: DXIRFFP210

Behöver du hjälp?

Om du behöver hjälp med DeWalt DXIRFFP210 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad DeWalt Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer