Digital Watchdog DWC-C232D Bruksanvisning

Digital Watchdog övervakningskamera DWC-C232D

Läs nedan 📖 manual på svenska för Digital Watchdog DWC-C232D (2 sidor) i kategorin övervakningskamera. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

■

■■ Ad

ustment of Back Focus

C232D

About this manaul

■

■■

Adjustment of DC / VIDEO lenses

INSTRUCTION MANUAL

Before installing and using the camera, please read this manual

carefully. Be sure to keep it handy for future reference.

TROUBLESHOOTING

■Do not open or modify

Do not open the cabinet exet during maintenance and

installation, as it may be dangerous and cause damages.

■Do not put objects inside the unit

Make sure that no metal objects or flammable substances

get insdie the camera. It could cause fire, short-circuits or

damages.

■Be careful when handling the unit

To prevent damage, do not drop the camera or subject

it to strong shock or vibration.

■Install away from electric or magnetic fields.

■Protect from humidity and dust.

■Protech from high temperature

Be careful when installing colose to the ceiling , in a kitchen

or boiler room, as the temperature may raise to high levels.

■Cleaning

Dirt can be removed from the cabinet only by wiping it

with a soft cloth moistened with a soft detergent solution.

■Mounting Surface

The mounting surface material must be strong enough to

secure the camera.

PRECAUTIONS CAMERA LENS SETTINGS

Focus adjustment

1. Please check the lenes is C mount or CS mount.

To use C mount lens, please fix the lens into front camera after mounting included C ring to lens.

To use CS mount lens, please fix the lens directly into front camera without C ring.

2. To adjust the focus, slide the focus lever on the side of the front camera.

In case of the vari focal lens, adjust the focus lever where the lens is focused in fosing postion "wide" and "tele"

3. Please tighten the focus lever after the adjustment in order to prevent being out of focus.

5436 W Crenshaw Street

Tampa, FL 33634

www.digital-watchdog.com

Technical Support: 1-866-446-3595 / 813-888-9555

■

■■

Adjustment

VIDEO

lenses

To adjust a lens with automatic iris (DC driven or video driven) to the camera, please proceed as follows:

Slowly turn the Level potentiometer back until the monitor picture appears to be perfect and is not too bright anymore.

Then turn the potentiometer back to the right (in direction ”H”) just a little bit.

Check the lens performance by using the camera under different and/or changing light conditions.

Turn the Level potentiometer to the max. position H (turn right).

The monitor picture then appears to be too bright.

Before installing and using the camera, please read this manual

carefully. Be sure to keep it handy for future reference.

TROUBLESHOOTING

Before sending the camera out for repair, check the items

below. If the problem persists after checking these items,

contact your service center.

■

■■ If no image appears

Is the coaxial cable attached securely?

Are the power and voltage normal?

Has the iris of the lens inside the camera been

adjusted correctly (with the level volume) ?

Is there adequate illumination?

■

■■ If the image is unclear

Is the lens in focus?

Is the lens dirty?

Dirt of fingerprints on the lens can adversely affect the

images. Gently wipe any dirt or fingerprints off the lens

with a soft cloth or lens cleaning paper and cleaning

fluid (commercially available).

Is the monitor adjusted correctly?

■Do not open or modify

Do not open the cabinet exet during maintenance and

installation, as it may be dangerous and cause damages.

■Do not put objects inside the unit

Make sure that no metal objects or flammable substances

get insdie the camera. It could cause fire, short-circuits or

damages.

■Be careful when handling the unit

To prevent damage, do not drop the camera or subject

it to strong shock or vibration.

■Install away from electric or magnetic fields.

■Protect from humidity and dust.

■Protech from high temperature

Be careful when installing colose to the ceiling , in a kitchen

or boiler room, as the temperature may raise to high levels.

■Cleaning

Dirt can be removed from the cabinet only by wiping it

with a soft cloth moistened with a soft detergent solution.

■Mounting Surface

The mounting surface material must be strong enough to

secure the camera.

PRECAUTIONS CAMERA LENS SETTINGS

Focus adjustment

1. Please check the lenes is C mount or CS mount.

To use C mount lens, please fix the lens into front camera after mounting included C ring to lens.

To use CS mount lens, please fix the lens directly into front camera without C ring.

2. To adjust the focus, slide the focus lever on the side of the front camera.

In case of the vari focal lens, adjust the focus lever where the lens is focused in fosing postion "wide" and "tele"

3. Please tighten the focus lever after the adjustment in order to prevent being out of focus.

5436 W Crenshaw Street

Tampa, FL 33634

www.digital-watchdog.com

Technical Support: 1-866-446-3595 / 813-888-9555

■ CAMERA SET

■ CAMERA SET ■ CAMERA SET

■

■■ O.S.D

(

On Screen Displa

CAMERA DIMENSION CAMERA SETTINGS

SET UP FUCNTION SUMMARY

LENS MANUL, DC -DC :

SHUTTER FIXED, MANUAL,FLK -MANUAL : MANUAL shutter adjust.

-BLC AREA

-BLC RATIO

AGC ON, OFF -AGC GAIN : Min ~ Max

-MANUAL : RED, BLUE

-FIXED : MODE 1,2,3,4

-CONTRAST adjust.

CONTRAST, SHARPTNESS, -SHARPNESS adjust.

CB_GAIN, CR_GAIN -CB_GAIN adjust.

-CR_GAIN adjust.

FUNCTION

-CAMERA ID

-POSITION

MIRROR ON, OFF -Mirror image on/off

-AUTO : DELAY

START LEVEL

END LEVEL

-AREA

-MOTION TH

-MOTION TRACE ON/OFF

-AREA SEL

-AREA STATE

GAMMA USER, 0.05 ~ 1.0 -GAMMA set.

E li h K

ON, OFF

AUTO, B/W, COLOR

CAMERA ID

DAY / NIGHT

ADJUST

BLC ON, OFF

WHITE BAL ATW, AWB , FIXED, MANUAL

MOTION ON, OFF

PRIVACY ON.OFF

■

■■ O.S.D

(

On Screen Displa

Control

■

■■ Connection of lens socket ”A-Iris”"

OSD KEY & LED

DC IRIS LEVEL

VIDEO OUTPUT

TERMINAL BLOCK (POWER INPUT)

Connect the coaxial cable (with pre-wired BNC plug) to the BNC connector (Video) of the camera. If you are using an automatic iris lens with the

camera, the lens has to be connected to the A-Iris socket of the camera. If you are using a lens with manual or fixed iris, this socket is not used. The