Digitus DN-82000 Bruksanvisning

Läs nedan 📖 manual på svenska för Digitus DN-82000 (4 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
14 SLOTS UNMANAGED
MEDIA CONVERTER CHASSIS
PRODUCT OVERVIEW
The 14 slots media converter chassis supports plug-and–play installation of stand-alone
media converters convert modules.
14 slots rack-mounted chassis
This converter chassis can supply several media converters with power, this will simple
the links and structure, it can work stably and adapt broad width of voltage. It can store
strong power and can be operated and managed easily. The maintenance of this chassis
is also very easy. This option is the very one to meet the requirements of good stability,
high capacity, good integration and good quality.
This option supports hot-swap convert modules. It can work with single power supply or
dual power supply as users wish, when the power supply should be maintained or
changed, it is not necessary to pull-out the converters, this makes the maintenance easy.
With all these advantages, this option can supply users with an effective solution of
networks.
INSTALLATION
1. When you unpack this product package, please check the devices with packing list.
2. Install the converter chassis in a standard 483mm (19”) cabinet and fix it.
3. Unscrew two screws from the side next to the RJ45 port of the media converter. Then
use these two screws to fix the carrier given with this option onto the side of media
converter, leaving the bigger side of the screws ahead. Then insert the converter to the
chassis, make sure the power plug of chassis is inserted in the power port of media
converter. When the converter is fully and firmly fit the chassis, fasten the screws on
the carrier. Follow the above steps, install all necessary converters in the chassis, then
block up any slots not for use temporarily.
4. Insert the RJ45 twisted pair to the electrical port of converter, and insert the fiber to the
fiber port of the converter. Then connect the supplied AC to DC power adapter to the
receptacle at the back of the chassis, attach the plug into a standard AC outlet with a
voltage range from 100 to 260 Vac or a DC outlet with a voltage of 48 Vac. Then turn
the power switch on, the POWER LED Lamps in the chassis will on and at green color.
For 14 slots media converter chassis, the POWER LED Lamp is in front side. Then the
fans began to work, that shows the power supply of the chassis is normal and stable.
The LED Indicator Lamps of converters installed in chassis should indicate valid
network connections and working status. Then the chassis began to work stably.
5. If the chassis is with dual power supply, please turn on both two power supply, and they
will work together. This will extends the life cycle of the power supply, and can make
sure the chassis work normally in case one of them broken down.
FAULT AND MAINTENANCE
1. Finding out the problems.
When the electrical current WER LED Lamps of chassis becomes dangerous, the PO
will become red with alarm at the same time. When the problems have been cleared,
the LED Lamps will back to normal.
If the fuse has blown, or the power supply has broken down, the POWER LED Lamps
will be off, and the fans will not work. (The fuse is under the plug, you can pull it out for
checking or changing when necessary.)
When the fans of chassis broken down, the POWER LED Lamps will be normal but the
fans will not work. If this happens, the power supply must be changed for new ones,
and we will do this for users, you should not do it by yourself, or you may break up the
option s.
If the power supply of chassis is normal, but the LED Lamps of converters are off, there
might be any problems with the connection between the plug board of chassis and the
power supply, you should stop the electrical current and pull out the power adapter for
checking and reinserting.
2. Changing the power supply for new ones
When one of the dual power supply broke down, the chassis can work normally. You
should pull out the broken one .Then pull out the plug from it, and change it for another
on. connect the plug agai sis and converters will keep n. When this is done, the chas
working.
SPECIFICATIONS
Number of slots: 14
Media converters adapted: 10/100M or 1000M or 10/100/1000M stand-alone
media converters
Power in: AC 100 V~260 V; OR DC 48V
Power out: DC 5V, 12A
Diameter of DC plug: 2.5/5.5 mm
Ripple: 50 Mv
Noise: 50 Mv
Protection of power supply: circuit-breaker when overvoltage; circuit-breaker when
overflow; circuit-breaker when short circuit
Operating Temperature: 0°C ~50°C
Storage Temperature: -20°C ~85°C
Humidity: 5%~95%
Dimensions: L485, W231, H90 mm; 483mm (19 inches) 2U

Produktspecifikationer

Varumärke: Digitus
Kategori: Inte kategoriserad
Modell: DN-82000

Behöver du hjälp?

Om du behöver hjälp med Digitus DN-82000 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Digitus Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer