Digitus DN-95103 Bruksanvisning

Läs nedan 📖 manual på svenska för Digitus DN-95103 (1 sidor) i kategorin Nätverkskort/adapter. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
PoE+ Injector
PSE - Power Sourcing Equipment
(DN-95103)
User’s Manual
FCC Warning
This device has been tested and found to
comply with limits for a Class A digital device,
pursuant to Part 15 of FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates
and radiates radio frequency energy and, if
not installed and used in accordance with the
user’s manual, it may cause interference in
which case users will be required to correct
interference at their own expenses.
CE Warning
This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
This PoE+ Injector is a PoE power supply
consisting of 1x 10/100M data input port, and
1 x 10/100M data output port with 48V power
equipped, which is fully IEEE 802.3af/at
compatible. Any Cat. 5/5e cable (or above
cable) can directly connect to the input port
and then come out “Data with Power” from
output port. It is smart plug and play and very
easy to install in any existing networking
system, to bring in PoE features without any
new reconfiguration.
Package Contents
Before you start to install this PoE Injector, +
please verify your package that contains the
following items:
One PoE+ Injector
One Power Adapter with One Power Cord
One User’s Manual
Note: If any of these items is found missing or
damaged, please contact your local supplier
for replacement.
Key Features
1x “Data” input port compliant with IEEE
802.3 10BaseT, IEEE 802.3u 100BaseTX
1x PSE/PoE+ output port compatible with
IEEE 802.3af PoE and IEEE 802.3at PoE+
Supporting the power Max. 27 W for
PSE/PoE+ port
Output port has output current limited,
short-circuit protection, complete Power
Device (PD) detection and classification
Smart plug & play
Front Panel (LEDs)
LED Status Description
On PoE Power is on Power
Off PoE Power is off
On PD Link on PD
Off No Link
Connections
Use Cat. 5/5e twisted-pair cable (or above
cable) from the existing switch to the “Data”
input port of this PoE+ Injector, and then
connect the “Data + Power” output port to the
Power Device, such as Wireless AP, another
switches with PD function…etc.
Technical Specifications
Standards
IEEE 802.3af
IEEE 802.3at
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
Features
Number of Ports:
1 x Input (data only) Port
1 x Output (data + power)
Port
LED
Indicators Power and PD Link
Power Input DC 48V
Power
Output
48V/DC at Full 27 W
Output Supported
Power
Consumption 35 Watts (Max)
Dimensions 102 × 75 × 23 mm
(L x W x H)
Weight 0.19 kg
Operating
Temperature 0 to 40 °C
Storage
Temperature -20 to 85 °C
Humidity 10 to 90% RH
(non-condensing)
Certifications FCC Class A, CE

Produktspecifikationer

Varumärke: Digitus
Kategori: Nätverkskort/adapter
Modell: DN-95103

Behöver du hjälp?

Om du behöver hjälp med Digitus DN-95103 ställ en fråga nedan och andra användare kommer att svara dig




Nätverkskort/adapter Digitus Manualer

Nätverkskort/adapter Manualer

Nyaste Nätverkskort/adapter Manualer