Durkopp Adler 1120 Bruksanvisning

Durkopp Adler Symaskin 1120

Läs nedan 📖 manual på svenska för Durkopp Adler 1120 (33 sidor) i kategorin Symaskin. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/33

Instructions for service

1120 - 5

Minerva Boskovice, a.s., Sokolská 60, CZ - 680 17 Boskovice

Tel.: +420-516-453434, 453433, 494111 Fax: +420-516-452165 http://www.minerva-boskovice.com

Edition: 10/2002 Printed in Czech Republic S735 000529

CONTENTS:

1. General safety instructions .............................................................................................................................................................. 1

2. Introduction .......................................................................................................................................................................... 1

3. Head of the sewing machine .............................................................................................................................................. 2

3. 1 Hook and hook box ................................................................................................................................................................ 2

3.1.1 Description

3.1.2 Height setting of the hook

3.1.3 Setting the distance of the hook from the needle

3.1.4 Angular setting of the hook (timing)

3.1.5 Protection of the needle and of the hook point

3.1.6 Setting of the bobbin case opener

3.1.7 Setting the regulation of the hook lubrication

3.1.8 Replacement of the hook

3.1.9 Setting the gear

3.1.10 Dismantling of the hook box

3.2 Needle and thread mechanism ................................................................................................................................. 5

3.2.1 Description

3.2.2 To check the handwheel angular adjustment

3.2.3 Height setting of the needle bar

3.2.4 Side setting of the needle bar holder

3.2.5 Setting the needle (the needle bar holder)

3.3 Throat plate .............................................................................................................................................................................. 7

3.3.1 Description

3.3.2 Mounting and removing the throat plate and its insert

3.4 Thread tensioners and limiter ................................................................................................................................. 8

3.4.1 Description

3.4.2 Setting the tension of main and auxiliary tensioners

3.4.3 Setting the tensioning mechanism of the main tensioner

3.4.4 Setting the adapting spring

3.4.5 Setting the thread limiter

3.5 Feeding mechanism of the bootom feed ...........................................................................................................................10

3.5.1 Description

3.5.2 Stitch length mechanism

3.5.2.1 Setting of the horizontal component of the feeder movement

(setting of the upper feeding eccentric)

3.5.2.2 Setting of the vertical component of the feeder movement

3.5.2.3 Setting of the feeder position against the throat plate

3.5.2.4 Setting of the height of the feeder teeth

3.5.2.5 Forward and rearward stitch length distribution (rough)

3.5.2.6 Forward and rearward stitch length distribution (fine)

3.5.2.7 Setting of the control knob (including the stitch length limitation)

3.5.2.8 Feeder replacement

3.6 Feeding mechanism of the top roller ................................................................................................................................14

3.6.1 Description

3.6.2 Feeding clutch

3.6.2.1 Description

3.6.2.2 Setting of the feeding pitch

3.6.2.3 Setting of the lower eccentric

3.6.2.4 Setting the engagement and disengagement of the clutch

3.6.3 Side setting of the indented lower pulley

3.6.4 Side setting of the indented upper pulley

3.6.5 Setting the tensioning roller

3.6.6 Replacement of the indented belt

3.6.7 Setting the feeding difference

3.6.8 Replacement of the friction wheels of the drive conversion unit

3.6.9 Top roller

3.6.9.1 Selection of the top roller diameter

3.6.9.2 Forward, rearward and side setting

3.6.9.3 Setting the gear clearance and in the mounting of the top roller

3.6.9.4 Setting of the height and of the pressing force of the top roller

3.6.9.5 Replacement of the top roller

3.7 Setting the presser foot lift .................................................................................................................................................. 20

3.8 Bobbin winder ....................................................................................................................................................................... 20

3.8.1 Description

3.8.2 Setting the bobbin winder stop

3.8.3 Setting the friction gear

3.9 Safety clutch .......................................................................................................................................................... 21

3.9.1 Description

3.9.2 Setting the disengaging moment

3.10 Indented belt transmission ................................................................................................................................... 21

3.10.1 Setting the tensioning roller of the indented belt

3.10.2 Replacing the indented belt

3.11 V-belt, motor - head .............................................................................................................................................. 22

3.11.1 Tensioning

3.11.2 Replacing the V-Belt

3.12 Driving toothed belt ............................................................................................................................................................... 22

3.12.1 To exchange the driving toothed belt

3.13 Lubrication .............................................................................................................................................................................. 23

3.13.1 Description

3.13.2 Refilling oil

3.13.3 Multiple oil use

4. Thread trimming ................................................................................................................................................................................. 24

4.1 Description of the trimming mechanism

4.2 Setting the pickup roller

4.3 Setting the cam

4.4 Setting the fork

4.5 Setting the moving knife

4.6 Setting the fixed knife

4.7 Setting the retaining spring of the hook thread

4.8 Setting switching of the electromagnets

5. Lifting the top roller by electromagnet ....................................................................................................................................... 26

5.1 Description

5.2 Setting the electromagnet pin

5.3 Setting the electromagnet current

5.4 Assembly of the top roller lifting electromagnet

6. Backtacking using electromagnet .................................................................................................................................... 27

6.1 Description

6.2 Electromagnet height setting

6.3 Setting the position of push-buttons

6.4 Change of the function of push-buttons

7. Connecting the electric elements on the machine head ................................................................................................ 28

8. Drive, control panel, position sensor ........................................................................................................................... 28

9. Lighting ........................................................................................................................................................................... 28

9.1 Mounting on the machine head

9.2 Lamp replacement

10. Maintenance (table of operations) ................................................................................................................................. 29

11. Setting the machine according to the sewing category .................................................................................................. 29

11.1 Introduction

11.2 Table of setting the machine according to the sewing category

Produktspecifikationer

Varumärke:	Durkopp Adler
Kategori:	Symaskin
Modell:	1120
Enhetsplacering:	Ingebouwd
Typ av operation:	Draaiknop
Färg på produkten:	Zwart
Inbyggd display:	Nee
Timer:	Nee
Vikt:	20400 g
Bredd:	762 mm
Djup:	546.1 mm
Höjd:	73 mm
Förpackningens vikt:	22670 g
Typ av material (överst):	Roestvrijstaal
Brännare/kokzonseffekt 2:	2800 W
Brännare/kokzonseffekt 3:	1500 W
Brännare/kokzonseffekt 1:	2800 W
Antal brännare/kokzoner:	4 zone(s)
Typ av häll:	Gaskookplaat
Brännare/kokzon typ 1:	Regulier
Brännare/kokzon typ 2:	Regulier
Typ av brännare/kokzon 3:	Sudderen
Lätt att städa:	Ja
Antal gasbrännare:	4 zone(s)
Antal elektroniska kokzoner:	0 zone(s)
Sjud brännare/kokzon:	1465 W
Normal brännare/kokzon:	2784 W
Kontrollposition:	Rechtsboven
Ansluten last (elektrisk):	- W
Installationsfackets bredd:	723.9 mm
Installationsfack höjd:	165.1 mm
Stor brännare/kokzon:	2784 W
Nuvarande:	15 A
Ansluten last (gas):	- W
Pannstödsmaterial:	Gietijzer
Installationsutrymmets djup (min):	482.6 mm
Extra stor höghastighetskokzon:	3516 W
Ramfärg:	Zwart
Typ av brännare/kokzon 4:	Groot
Brännare/kokzonseffekt 4:	3500 W
Strömkälla brännare/kokzon 1:	Gas
Strömkälla brännare/kokzon 2:	Gas
Strömkälla brännare/kokzon 3:	Gas
Strömkälla för brännare/kokzon 4:	Gas
Installationsutrymmets djup (max):	492.1 mm
Placera brännare/kokzon 1:	Links achter
Placera brännare/kokzon 2:	Links voor
Placera brännare/kokzon 3:	Rechts achter
Placera brännare/kokzon 4:	Rechts achter
Kokzon 1 form:	Rond
Kokzon 2 form:	Rond
Kokzon 3 form:	Rond
Kokzon 4 form:	Rond
AC-ingångsspänning:	120 V
AC-ingångsfrekvens:	60 Hz