Durkopp Adler 567 Bruksanvisning

Durkopp Adler Symaskin 567

Läs nedan 📖 manual på svenska för Durkopp Adler 567 (80 sidor) i kategorin Symaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/80

567 classic

Service manual

Property of Dürkopp Adler AG and protected by copyright. Any reuse of these contents,

including extracts, is prohibited without the prior written approval of Dürkopp Adler AG.

IMPORTANT

READ CAREFULLY BEFORE USE

KEEP TO CONSULT LATER

Content

Service manual 567 classic - 01.0 - 10/2015 1

1 About these Service Instructions.............................................. 3

1.1 Scope ........................................................................................... 3

1.2 Representation conventions – symbols and characters ............... 3

1.3 Other documents .......................................................................... 4

1.4 Liability.......................................................................................... 4

2 Safety information ...................................................................... 5

2.1 Basic safety instructions ............................................................... 5

2.2 Signal words and symbols used in warnings................................ 6

3 Working basis ............................................................................. 9

3.1 Sequence of the settings .............................................................. 9

3.2 Cable routing ................................................................................ 9

3.3 Removing the covers.................................................................. 10

3.3.1 Access to the machine bottom section ....................................... 10

3.3.2 Removing and fitting the arm cover............................................ 11

3.3.3 Removing and fitting the head cover .......................................... 12

3.3.4 Removing and fitting the valve cover.......................................... 12

3.3.5 Opening and closing the throat plate slide ................................. 13

3.3.6 Removing and installing the throat plate .................................... 14

3.3.7 Removing and installing the feed-dog ........................................ 15

3.4 Flats on shafts ............................................................................ 16

3.5 Locking the sewing machine in place ......................................... 16

3.6 Putting the handwheel into position............................................ 17

4 Setting the handwheel scale ................................................... 19

5 Positioning the arm shaft......................................................... 20

6 Positioning the toothed belt pulleys....................................... 21

6.1 Upper toothed belt pulley............................................................ 21

6.2 Lower toothed belt pulley............................................................ 22

7 Setting the stitch length adjusting wheel............................... 23

8 Setting the stitch length limit .................................................. 25

8.1 Setting the eccentric for the forward and backward stitches ...... 26

9 Setting the feed-dog................................................................. 27

9.1 Setting the feed-dog position...................................................... 27

9.1.1 Moving the feed-dog................................................................... 28

9.1.2 Moving the feed-dog carrier........................................................ 29

9.2 Setting the feed-dog movement ................................................. 30

9.2.1 Setting the feed movement......................................................... 30

9.2.2 Setting the feed-dog height in the top dead center..................... 31

9.2.3 Setting the stroke movement...................................................... 32

10 Aligning the needle bar linkage............................................... 33

10.1 Moving the needle bar linkage sideways.................................... 33

10.2 Aligning the needle bar linkage in the sewing direction.............. 34

11 Position of the hook and needle ............................................. 36

11.1 Setting the hook side clearance ................................................. 36

11.2 Setting the loop stroke position .................................................. 38

Produktspecifikationer

Varumärke:	Durkopp Adler
Kategori:	Symaskin
Modell:	567
Färg på produkten:	Transparant
Snäll:	Klassieke speen
Rekommenderad ålder (max):	6 maand(en)
Rekommenderad ålder (min):	0 maand(en)
Typ av förpackning:	Doos
Antal per paket:	2 stuk(s)
Innehåller inte:	Bisfenol A / BPA
Nippelmaterial:	Silicone
Säkerhetssystem med ring:	Ja