Durkopp Adler 827-M Bruksanvisning

Läs nedan 📖 manual på svenska för Durkopp Adler 827-M (122 sidor) i kategorin Symaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/122
827/827-M
Service Instructions
All rights reserved.
Property of Dürkopp Adler AG and protected by copyright. Any reuse of these contents,
including extracts, is prohibited without the prior written approval of Dürkopp Adler AG.
Copyright © Dürkopp Adler AG 2019
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Table of Contents
Service Instructions 827/827-M - 01.0 - 05/2019 1
1 About these instructions ........................................................... 5
1.1 For whom are these instructions intended?.................................. 5
1.2 Representation conventions – symbols and characters ............... 5
1.3 Other documents .......................................................................... 7
1.4 Liability.......................................................................................... 7
2 Safety........................................................................................... 9
2.1 Basic safety instructions ............................................................... 9
2.2 Signal words and symbols used in warnings.............................. 10
3 Working basis ........................................................................... 13
3.1 Order of the adjustments ............................................................ 13
3.2 Laying the cables........................................................................ 13
3.3 Removing the covers.................................................................. 14
3.3.1 Access to the underside of the machine..................................... 14
3.3.2 Disassembling and assembling the arm cover ........................... 15
3.3.3 Disassembling and assembling the head cover ......................... 16
3.3.4 Disassembling and assembling the valve cover......................... 17
3.3.5 Opening and closing the throat plate slide ................................. 18
3.3.6 Disassembling and assembling the throat plate ......................... 19
3.3.7 Disassembling and assembling the feed dog ............................. 20
3.4 Flats on shafts ............................................................................ 21
3.5 Locking the machine in place ..................................................... 22
3.6 Adjusting the handwheel into position ........................................ 23
4 Adjusting the handwheel scale ............................................... 25
5 Positioning the arm shaft......................................................... 26
6 Positioning the toothed belt wheels ....................................... 27
6.1 Positioning the upper toothed belt wheel.................................... 27
6.2 Positioning the lower toothed belt wheel .................................... 28
7 Stitch length adjusting wheel.................................................. 30
7.1 Adjusting the stitch length adjusting wheel................................. 30
7.2 Adjusting the stitch length limit ................................................... 32
7.3 Adjusting the eccentric for the forward and backward stitches... 33
8 Needle bar linkage.................................................................... 35
8.1 Aligning the needle bar linkage sideways................................... 35
8.2 Aligning the needle bar linkage in the sewing direction.............. 37
9 Adjusting the feed dog............................................................. 38
9.1 Adjusting the feed dog position .................................................. 38
9.1.1 Moving the feed dog on the feed dog carrier.............................. 38
9.1.2 Moving the feed dog carrier........................................................ 39
9.2 Adjusting the feed dog movement .............................................. 40
9.2.1 Adjusting the feed movement ..................................................... 40
9.2.2 Adjusting the feed dog height at top dead center ....................... 41
9.2.3 Adjusting the stroke movement .................................................. 42
9.2.4 Adjusting the compensating weight ............................................ 43

Produktspecifikationer

Varumärke: Durkopp Adler
Kategori: Symaskin
Modell: 827-M

Behöver du hjälp?

Om du behöver hjälp med Durkopp Adler 827-M ställ en fråga nedan och andra användare kommer att svara dig




Symaskin Durkopp Adler Manualer

Symaskin Manualer

Nyaste Symaskin Manualer