Edifier M20 Bruksanvisning

Läs nedan 📖 manual på svenska för Edifier M20 (7 sidor) i kategorin högtalare. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/7
LEARN MORE
M20™ and M50™
TAKE A GOOD LOOK
Your headset may look
slightly different than the
illustration, but will still
work as described.
MICRO USB CHARGING PORT
Use with the AC wall charger:
1 hour beforerst use
2 hours (100% charge)
Do not use headset while charging
VOLUME BUTTONS
Volume presets (1 tap per level change)
LED
Charging (solid red)
Low battery (3 red flashes at powering on)
Pairing mode (repeating red/blue flashes)
CALL BUTTON
Take a call or end it (1 tap)
Redial (2 taps)
Initiate phone’s voice-dialing
(2-second press until tone is heard)
Reconnect lost Bluetooth connection
(1 tap if the headset doesn’t automatically
reconnect)
Activate pairing mode after initial set up
(press until red/blue LED flashes)
Activate multipoint (2-second press
while switching on power)
POWER SWITCH
On (slide to reveal black)
Off (slide to reveal red)
PLT_M50
CONNECT TO YOUR PHONE
“Pairing is the set-up process of
introducing your headset to your
phone. Before using your headset
for therst time, you must pair it
with your Bluetooth-enabled phone.
“Multipoint lets you pair this
headset with two phones so you
can answer a call from either phone.
You must activate multipoint before
pairing second phone.
1. READY
First Time, Right Out of the Box:
Turn on the headset. The LED
flashes red/blue to indicate
pairing mode.
Activate Multipoint (for 2nd phone):
While pressing Call button, turn
on the headset and continue
pressing Call button until LED
flashes blue twice. Repeat to turn
off multipoint.
Pair New or Second Phone:
Turn on headset. Press Call
button until the LED flashes red/
blue.
2. SET
Activate the Bluetooth feature
on your phone, then get phone
to add / search / discover new
Bluetooth devices.
Phones Have Different Menus to
Select from, for example:
iPhone: Settings > General >
Bluetooth > On (starts the search
for devices)
BlackBerry® smartphone:
Settings/options > Bluetooth: On >
Search for devices
Android™:
Settings > Wireless & Networks >
Bluetooth: On > Scan for devices
3. CONNECT
Select “PLT_M20” or “PLT_M50” from
the list of Bluetooth devices shown
on your phone.
If phone asks for a passcode, enter
four zeros (0000). You may see ****
on screen.
Some phones also ask to confirm
headset connection after pairing.
Headset LED will stop flashing red/
blue once successfully paired/
connected.
You can now make a call using your
phone’s keypad or voice-dialing
feature.

Produktspecifikationer

Varumärke: Edifier
Kategori: högtalare
Modell: M20

Behöver du hjälp?

Om du behöver hjälp med Edifier M20 ställ en fråga nedan och andra användare kommer att svara dig




högtalare Edifier Manualer

högtalare Manualer

Nyaste högtalare Manualer