Ei Electronics Ei225E Bruksanvisning

Läs nedan 📖 manual på svenska för Ei Electronics Ei225E (32 sidor) i kategorin Rökdetektor. Denna guide var användbar för 13 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/32
BS EN 50291: 2001
MAINS
MAINS
MAINS
MAINS
MAINS
MAINS
POWERED
POWERED
POWERED
POWERED
POWERED
POWERED
Model Ei 225EN
Model Ei 220EN
- HARD WIRED TO MAINS
- WITH POWER CORD
MAINS POWERED
CARBON MONOXIDE ALARM
Read and retain carefully for as long as the product is being used. It contains vital information
on the operation and installation. The leaflet should be regarded as part of the product.
If you are just installing the unit, the leaflet must be given to the householder. The leaflet is to
be given to any subsequent user.
INSTRUCTIONS
B15584-R0-225EN&220EN-U&C 6/9/07 8:13 AM Page 1
3
4
5
11
15
19
20
22
24
26
28
28
30
1
2
3
4
5
6
7
8
9
10
11
12
13
READ THIS FIRST
WHAT TO DO WHEN THE CO ALARM SOUNDS
CARBON MONOXIDE - THE SILENT KILLER!
WHERE TO PLACE CARBON MONOXIDE ALARMS
INSTALLING YOUR CARBON MONOXIDE ALARMS
TESTING YOUR CARBON MONOXIDE ALARMS
MAINTAINING CARBON MONOXIDE ALARMS
LIMITATIONS OF CARBON MONOXIDE ALARMS
HOW TO PROTECT YOUR FAMILY
TECHNICAL SPECIFICATIONS
GETTING YOUR CARBON MONOXIDE ALARMS SERVICED
GUARANTEE
TROUBLESHOOTING
CONTENTS Page
2
B15584-R0-225EN&220EN-U&C 6/9/07 8:13 AM Page 2
1. READ THIS FIRST
WARNING: The Ei225EN Alarm should be permanently wired to the mains by a
qualified electrician in accordance with IEE wiring regulations (BS7671).
The Ei220EN is just plugged in to the mains.
Install the Carbon Monoxide Alarm (CO Alarm) in every room that contains a fuel
burning appliance, particularly rooms where people spend a lot of time e.g.
bedrooms, kitchens and sitting rooms.
In rooms with an appliance install (preferably) on the ceiling, (300mm from
walls), and between 1m to 3m horizontally from appliance. In rooms remote from
the appliance install at breath level, where the light indicators can be seen.
Regularly check that the green power light is on. Important: The CO Alarm will
not work if the mains supply is off.
Test the unit weekly by pressing the test/hush button-the horn will sound.
Open the unit by sliding the cover up as shown in figure 1. Then remove the
terminal block screw. (Ei225EN only).
Immediately the unit is powered the green light will turn on & the red & amber
lights will flash once to show they are operational.
Replace unit after up to 6 years operation (see ‘Replace by’ date on sidewall
label).
3
?
?
B15584-R0-225EN&220EN-U&C 6/9/07 8:13 AM Page 3

Produktspecifikationer

Varumärke: Ei Electronics
Kategori: Rökdetektor
Modell: Ei225E

Behöver du hjälp?

Om du behöver hjälp med Ei Electronics Ei225E ställ en fråga nedan och andra användare kommer att svara dig




Rökdetektor Ei Electronics Manualer

Rökdetektor Manualer

Nyaste Rökdetektor Manualer