Elac IW-S10EQ Bruksanvisning

Elac Subwoofer IW-S10EQ

Läs nedan 📖 manual på svenska för Elac IW-S10EQ (44 sidor) i kategorin Subwoofer. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/44
IW-S10EQ Powered Subwoofer OPERATING INSTRUCTIONS
IW-S10EQ IN-WALL POWERED SUBWOOFER
ELAC IW-S10EQ-W Subwoofer | www.elac.com | Page 1
Safety Instructions
1. General information
Please read and follow these safety instructions.
Keep them safe for future reference.
Observe all warnings on the speaker and in the manual. Please check the speaker for damage before
use. The speaker must be in perfect working condition. Damaged parts may lead to personal injury.
CAUTION! Subwoofers and active speakers are heavy. Be careful when lifting them to prevent
personal injury.
2. Use only as directed
Connect this speaker according to the instructions in the manual.
Many ELAC speakers are equipped with spikes and / or anti-slip feet. They are explicitly provided for
levelling the alignment. They have to be screwed into the thread until thread end. For levelling on an
uneven floor, it is allowed to unscrew the spikes or anti-slip feet by 2-3 turns of thread. The speaker has
always to be in perfect vertical alignment. The stability of the speaker must not be compromised by using
spikes or anti-slip feet as the speaker may tip-over.
3. Location
Install the speakers on a level surface only
When choosing the location of these speakers do not place them in locations that are:
In direct sunlight
Very humid
Prone to vibrations
Exceptionally hot or cold
Near CRT Televisions (The speakers are not magnetically shielded and may cause color issues
with a CRT based TV)
Close to magnetic cards (Since the speakers are not magnetically shielded placing magnetic
cards such as credit cards or commuter cards may cause them to fail).
WARNING! Please ensure the product is perfectly stable to avoid severe injury from tip-over. Please note, that
stability can be increased by using spikes for carpets. However, the mounting of spikes must be carried out
carefully because the spikes have very sharp ends which may cause injuries. The stability on slippery floors
can be increased by using Velcro fastening tape or double-sided adhesive tape. Do not install the speaker near
any heat sources such as radiators, heating valves, stoves, or other apparatus (including amplifiers) that produce
heat, or in areas where there is a risk of explosion.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Don’t install the speaker in a closed rack or in a closed cupboard.
Don’t put burning candles on or near the speaker.
Do not install the speaker near transformers because electromagnetic stray fields can cause the
subwoofer(s) to produce humming noise.
In combination with certain materials / lacquers / material surfaces, anti-slip feet or spike washers may
cause colored imprints on the surfaces.
4. Overload
Extreme overload of the device due to very high volume may cause individual components to blow.
Because of the possible danger, you should never leave loudspeakers under extreme overload
conditions unattended.
ELAC IW-S10EQ-W Subwoofer | www.elac.com | Page 2
5. Service
DANGER! Do not open the cabinet because the components and conductors may carry dangerous levels
of electricity! Servicing to be carried out by qualified service personnel only.
Servicing is required when the loudspeaker has been damaged in any way, such as damage to
the power supply cord or the plug, or when liquid has been spilled or objects have fallen into the
loudspeaker, the speaker has been exposed to rain or moisture, does not operate normally, or has been
dropped. To reduce the risk of electric shock, do not open the loudspeaker. Servicing to be carried out
by qualified service personnel only.
6. Fuse links
Various faults in subwoofers or active speakers may cause the fuse to blow. If the fuse blows, only
replace it with the correct fuse type and rating as shown on the rear of the loudspeaker on the fuse
holder. A second fuse is included with the device (in the fuse holder beneath the mains socket).
7. Cleaning
NOTE: Clean only with soft, smooth cloth or with dust brush. Do not use scouring agents, alcohol,
benzene, furniture polish or other agents for cleaning! Modern furniture is often coated with multiple
varnishes and plastics which can be treated with chemical agents. Some of these agents contain
substances which degrade or soften the rubber feet. Therefore we advise you to place an anti-slip mat
underneath the loudspeaker.
8. Volume
CAUTION! Continuous high volume may cause severe damage to your hearing. Please listen responsibly.
9. Disposal
The packaging is made from recyclable materials. Dispose of this in an environmentally friendly manner.
At end of product life do not dispose of the speaker(s) with standard household waste. The speaker must
be recycled in accordance with local legislation. Ask your local government for further information on
recycling as the device contains valuable raw materials. Disable the speaker before disposal.
10. Power
This subwoofer is only intended to be connected to voltages that are listed on the rear panel of the
cabinet. Connection to any other voltage may cause irreversible damage to the subwoofer and will void
the warranty. Use of plug adapters is not recommended because they may allow connection to voltages
other than those printed on the back of this subwoofer.

Produktspecifikationer

Varumärke: Elac
Kategori: Subwoofer
Modell: IW-S10EQ

Behöver du hjälp?

Om du behöver hjälp med Elac IW-S10EQ ställ en fråga nedan och andra användare kommer att svara dig




Subwoofer Elac Manualer

Subwoofer Manualer

Nyaste Subwoofer Manualer