Elba ETERNO EH-E9122ST(BK) Bruksanvisning

Elba Fläktkåpa ETERNO EH-E9122ST(BK)

Läs nedan 📖 manual på svenska för Elba ETERNO EH-E9122ST(BK) (8 sidor) i kategorin Fläktkåpa. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
1
For The Warranty Terms & Conditions, Please Refer To Warranty Certificate
Owner’s Manual
Please read this manual carefully
before operating your set.
Retain it for future reference.
Record model number and serial
number of the set.
See the label attached on the set and
quote this information to your dealer
when you require service.
DESIGNER HOOD
MODEL: -E9122ST(BK) EH
2
Please read this instruction carefully. It is advisable to keep this instruction
manual in a safe place for future reference.
SAFETY PRECAUTIONS
1. Keep electrical appliances out of reach from children. Do not let them to
operate the appliances without supervision.
2. To protect against the risk of electrical shock, do not immerse the product,
cord or plug into water or any other liquid.
3. This product is for household and indoor use only.
4. This product is not intended for use by person (including children) with
reduced physical, sensory or mental capabilities unless they have been
given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
5. If the power cord or plug is damaged, it must be replaced by the service
centre or a qualified service technician to avoid hazard.
6. Before installation, check if the mains supply voltage is matched with the
voltage stated on the rating plate of the hood.
7. There must be adequate air ventilation of the room when the cooker hood
is used with the cooking appliances with burning gas or other fuels.
8. Ensure that the installation of exhaust complies with the standard of local
building, gas and electrical authorities.
9. Do not ignite flames in the pans.
10. There is a risk of fire if cleaning is not carried out in accordance with this
instruction.
3
ASSEMBLY INSTRUCTIONS
Please check the following before installation:
od must be carried out by an authorized or qualified technician. Installation of ho
Remove all packaging materials from the cooker hood. Check and make sure
that the cooker hood is not damaged.
has switched OFF when installing the hood. Please ensure the power supply
air extraction, avoid having too many windows surrounding the For optimum
cooker hood which will cause air convection.
The optimum height for the installation is between 350 to 450mm which
measure from the bottom of the hood to the top of the hob.
Make sure the hood is in level after installation to avoid oil spill over from the oil
cup collectors.
Before installing, determine the height between the bottom of the cooker hood to
the top of the hob. Mark the wall to suit bracket locations. on the
Drill 4 holes with diameter of Ø8mm and 60mm deep. Insert the screw anchors
into the holes. ighten the screwFix the mounting bracket and t s.
Remove the horizontal oil cup. Hang the hood on the mounting bracket and
make sure the hood is in level.
Fix the exhaust ducting on the hood. Install the oil cups on the cooker hood.
Install the telescopic exhaust cover to the height required.
Before connecting to the mains supply, ensure that the mains voltage
corresponds to the voltage on the rating plate inside the cooker hood.

Produktspecifikationer

Varumärke: Elba
Kategori: Fläktkåpa
Modell: ETERNO EH-E9122ST(BK)

Behöver du hjälp?

Om du behöver hjälp med Elba ETERNO EH-E9122ST(BK) ställ en fråga nedan och andra användare kommer att svara dig




Fläktkåpa Elba Manualer

Fläktkåpa Manualer

Nyaste Fläktkåpa Manualer