Elba Forza EH-A9022ST(SS) Bruksanvisning

Elba Fläktkåpa Forza EH-A9022ST(SS)

Läs nedan 📖 manual på svenska för Elba Forza EH-A9022ST(SS) (13 sidor) i kategorin Fläktkåpa. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/13
For The Warranty Terms & Conditions, Please Refer To Warranty Certificate
Owner’s Manual
Please read this manual carefully before
operating your set.
Retain it for future reference.
Record model number and serial number
of the set.
See the label attached on the set and
quote this information to your dealer
when you require service.
DESIGNER HOOD
MODEL: FORZA EH-A9022ST(SS)
Please read this instruction carefully. It is advisable to keep this
instruction manual in a safe place for future reference.
SAFETY PRECAUTIONS
1. Keep electrical appliances out of reach from children. Do not let them
to operate the appliances without supervision.
2. To protect against the risk of electrical shock, do not immerse the
product, cord or plug into water or any other liquid.
3. This product is for household and indoor use only.
4. This product is not intended for use by person (including children)
with reduced physical, sensory or mental capabilities unless they
have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
5. If the power cord or plug in damaged, it must be replaced by the
service centre or a qualified service technician to avoid hazard.
6. Before installation, check if the mains supply voltage is matched with
the voltage stated on the rating plate of the hood.
7. There must be adequate air ventilation of the room when the cooker
hood is used with the cooking appliances with burning gas or other
fuels.
8. Ensure that the installation of exhaust complies with the standard of
local building, gas and electrical authorities.
9. Do not ignite flames in the pans.
10. There is a risk of fire if cleaning is not carried out in accordance with
this instruction.
ASSEMBLY INSTRUCTIONS
Please check the following before installation:
Installation of hood must be carried out by an authorized or qualified
technician.
For optimum air extraction, avoid having too many windows
surrounding the cooker hood which will cause air convection.
Make sure the hood is in level after installation to avoid oil spill over
from the oil cup collectors.
The optimum height for the installation is between 300 to 350mm
which measure from the bottom of the hood to the top of the hob.
1) Before installing, determine the height between the bottom of the
cooker hood to the top of the ho b.
2) Mark the wall to suit all bracket locations.
3) Drill 4 holes with diameter of Ø10mm and 60mm deep. Insert the
screw anchors into the holes. Tighten the screw with the mounting
bracket.
4) Hang the hood on the mounting bracket and make sure the hood is
in level.
5) Fix the exhaust ducting on the hood with the screws provided.
6) Install the telescopic exhaust cover to the height required.
7) Install the oil cups on the cooker hood.
8) Before connecting to the mains supply, ensure that the mains
voltage corresponds to the voltage on the rating plate inside the
cooker hood.

Produktspecifikationer

Varumärke: Elba
Kategori: Fläktkåpa
Modell: Forza EH-A9022ST(SS)

Behöver du hjälp?

Om du behöver hjälp med Elba Forza EH-A9022ST(SS) ställ en fråga nedan och andra användare kommer att svara dig




Fläktkåpa Elba Manualer

Fläktkåpa Manualer

Nyaste Fläktkåpa Manualer