Electrolux RM 123E Bruksanvisning

Electrolux Kylning frysning RM 123E

Läs nedan 📖 manual på svenska för Electrolux RM 123E (16 sidor) i kategorin Kylning frysning. Denna guide var användbar för 25 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/16

OPERATING AND INSTALLATION INSTRUCTIONS

FOR ELECTROLUX REFRIGERATORS

TYPE A310 K

MODEL RM 123E

(Bottled Gas and 12 / 230 Volt Operation)

MODEL RM 122F

(Bottled Gas and 12 Volt Operation)

IMPORTANT USER INFORMATION

It most important that this instruction book should be retained with the appliance for future

reference. Should the appliance be sold or transferred to another owner, always ensure that the

book is supplied with the appliance in order that the new owner can be acquainted with the

functioning of the appliance and the relevant warnings.

These warnings are provided in the interest of safety. You must read them carefully

before installing or using the appliance.

• This product is designed to be operated by adults. Children should not be allowed to tamper with the controls or

play with the product.

• Any electrical work required to install this appliance should be carried out by a qualified electrician.

• This product should be serviced by an authorised Electrolux Service Engineer, and only genuine Electrolux spare

parts should be used.

• It is dangerous to alter the specifications or modify this product in any way.

• Care must be taken to ensure that the appliance does not stand on the electrical supply cable.

• Electrolux refrigerators are designed to be used specifically for the storage of edible foodstuffs only.

• There are working parts in this product which heat up. Always ensure that there is adequate ventilation as a failure

to do this will result in component failure and possible food loss. See installation instruction.

• Parts which heat up should not be exposed, Wherever possible the back of the product should be close to a wall

but leaving the required distance for ventilation as stated in the installation instructions.

• Before defrosting, cleaning or maintenance work is carried out, be sure to switch off the appliance and unplug it.

• The ice box in this appliance contains tubes through which the refrigerant passes. If these are punctured this would

cause substantial damage and result in food toss. DO NOT USE SHARP INSTRUMENTS to scrape off frost or ice.

Under no circumstances should solid ice be forced off the ice box. Solid Ice should be allowed to thaw when

defrosting the appliance. See defrost instructions.

• The appliance should be left fort hours after installation before it is turned on in order to allow refrigerant to settle,

unless it is of the absorption type in which case it can be turned on immediately.

• This appliance is heavy. Care should be taken when moving it.

• Ice lollies can cause frost burns if consumed straight from the freezer.

• Frozen food must not be refrozen once it has thawed out.

• Manufacturers' food storage recommendations should. be strictly adhered to. Refer to relevant instructions.

• Do not place carbonated or fizzy drinks in the freezer as it creates pressure on the container which may cause it to

explode resulting in damage to the appliance.

• Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced

persons may cause injury or more serious malfunctioning. Refer to your local Electrolux Service Centre and always

insist on genuine Electrolux spare parts.

GENERAL GUIDE TO FITTING ANY PLUG

• Ensure the lengths of wire inside the plug are prepared correctly.

• Connections should be firmly made after all conductor strands are entered into the terminal posts.

• When preparing the cable ends take care not to damage the outer sheath, or the insulation surrounding the inner

conductors.

• Tighten all screws.

• Replace the top cover of the plug and secure.

INSTRUCTIONS FOR INSTALLATION

1. INTRODUCTION

Before starting to install the refrigerator, please read these instructions carefully in order to obtain a thorough

understanding of what is required.

When operating, heat is emitted from parts of the cooling unit at the rear and this has to be carried away by air

circulating freely over the back of the refrigerator. To ensure sufficient air circulation for satisfactory operation, it Is

essential that the clearances called for in these instructions are not reduced in any way otherwise cooling performace

will be impaired. Providing the refrigerator is Installed in accordance with these instructions, it should operate

satisfactorily in ambient temperatures up to $2°C (90°F), with some measure of cooling up to about 35°C (95'F).

It is recommended that the refrigerator is installed by the caravan manufacturer, the supplier or another qualified

person. Owners who are competent to carry out the work themselves can do so, but, for the sake of safety, they must

take particular care in making the gas connections, checking for leaks, and installing the electrical wiring and fittings. All

relevant regulations concerning such installations must be complied with.

Many caravans are already provided with a recess, usually in the form of a cupboard which has been specially designed

so that it can be adapted, by removal of its door and shelves, to house a refrigerator. Some caravan manufacturers

have also devised kits of parts to aid installation of refrigerators in their particular caravans.

A ventilator for fitting above the door as shown in fig. 4 is supplied with the refrigerator. The connection pipe, gas cock,

and connectors are not supplied by Electrolux as the sizes of these may vary to suit particular installations. The

appropriate parts should, however, be readily available from the refrigerator supplier or an Agent dealing in gas fittings

{see note in item 11).

The refrigerator weighs approximately 14.5 kg (321b) and the surface on which it is installed must be capable of

carrying this weight, plus that of the food, satisfactorily.

All surfaces above and adjacent to the flue outlet, and beside and below the burner housing should be of, or covered

with, metal or other non-flammable material -

IMPORTANT: On motorised vehicles, the refrigerator must be installed well away from fuel tanks, fuel filling inlets, pipes

leading from inlets to fuel tanks, and fuel tank breathers.

WARNING:

Because of the hazards associated with the use of continuous operating bottled-gas appliances with openflame burners

in difficult-to-ventilate confined spaces, and other considerations, Electrolux do not recommend the installation of their

bottled-gas caravan refrigerators on boats, and refrigerators so installed will not be covered by the Company's guarantee.

if however, a boat installation is planned for the refrigerator, reference should be made to British Standard 5482

Part 3, 1979 and to the Thames Water Authority 'Launch Digest’ and 'Launch- Specification’

Also, current Guide Lines published by local Water Authorities, or the $hip and Boat Builders' National

Federation.

It should be noted that special Marine Refrigerators are available from Electrolux for use on boats.

2. VENTILATION

The refrigerator will always be built into a recess but to enable the unit to operate efficiently, it is essential that air is

allowed to circulate freely over the cooling unit at the back to carry away the heat generated during the cooling process

(see fig. 1). The minimum free spaces called for under, behind and over. the cabinet must not, therefore, be reduced in

any way. The more space provided, particularly behind and over the cabinet, the better the performance you can expect

from the cooling unit.

3. IMPORTANCE OF LEVELLING

The downward circulation of refrigerant within the cooling unit is by gravity and the refrigerator has lobe reasonably

level, when it is stationary, for the cooling' unit to operate properly. If the refrigerator is left operating with a sustained list

in excess of about 3' in any direction, pockets of liquid refrigerant can collect at various points within the unit impairing

or preventing normal circulation of the refrigerant vapour until level conditions return. It is essential, therefore, that the

refrigerator is installed so that the ice-tray shelf inside the refrigerator is level in relation to the caravan, in both

directions, so that when the caravan is level, the ice-tray shelf is level.

Produktspecifikationer

Varumärke:	Electrolux
Kategori:	Kylning frysning
Modell:	RM 123E

Behöver du hjälp?

Om du behöver hjälp med Electrolux RM 123E ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Kylning frysning Electrolux Manualer

Electrolux ERN29790 Bruksanvisning

22 Oktober 2024

Electrolux eres 3500 Bruksanvisning

21 Oktober 2024

Electrolux rm 7505 Bruksanvisning

24 Juli 2024

Electrolux erd28304w8 Bruksanvisning

24 Juli 2024

Electrolux er 6524 t Bruksanvisning

23 Juli 2024

Electrolux ENN2754AOW Bruksanvisning

23 Juli 2024

Electrolux EN3453MOX Bruksanvisning

22 Juli 2024

Electrolux erl 6296 w Bruksanvisning

22 Juli 2024

Electrolux Er 3000 Bruksanvisning

22 Juli 2024

Electrolux er 2522 Bruksanvisning

22 Juli 2024

Kylning frysning Manualer

Nyaste Kylning frysning Manualer

Zanker ZKK 8411 Bruksanvisning

15 Januari 2025

Indesit rg 1142 w Bruksanvisning

12 Januari 2025

BEKO CXFP3582 Bruksanvisning

11 Januari 2025

BEKO GNE 26214 E Bruksanvisning

10 Januari 2025

Miele K 37682 iDF Bruksanvisning

10 Januari 2025

Frigor TM 200 Bruksanvisning

7 Januari 2025

Primo FR1-WS Bruksanvisning

7 Januari 2025

Ignis ARL 6602 Bruksanvisning

7 Januari 2025

Liebherr cn 5113 comfort Bruksanvisning

24 Oktober 2024

Liebherr ctn 4663 Bruksanvisning

24 Oktober 2024