Elro SX-1R Bruksanvisning

Elro Dörrklocka SX-1R

Läs nedan 📖 manual på svenska för Elro SX-1R (1 sidor) i kategorin Dörrklocka. Denna guide var användbar för 15 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/1

Volume

Mode Light

Volume

Mode Light

CR2032 3V

Lithium Battery

Remove

Isolation

Strip

Wireless Door Chime Kit with Flashing Light SX-1B/ SX-1R

100m

Push Button

• Open up the push button by pushing in the tab at the

bottom of the push with a small flat screwdriver.

• Remove the isolation strip from the battery

compartment then it is ready to use.

• When replacing the battery, ensure the battery polarity

matches the internal markings (“+” facing upwards),

then press the battery down so that it is sitting firmly

in its compartment.

Door Chime

• Slide open the battery compartment.

• Insert 2 x 1.5volt alkaline batteries (“AA”, UM3 & LR6

- not included) into the battery compartment, ensuring

the battery polarity matches the internal markings.

• Close the battery door then it is ready to use.

3 4

Digital Code Set Up

• Press the Push Button once, a new operation code is

generated randomly and sent to the Door Chime unit.

• The Door Chime will sound to indicate that a new

operation code is registered and memorised.

Push Button Installation

• Using the holes on the back of push button as a

template, mark the fixing position for the unit.

• Drill holes and fit wall plugs and secure the push button

unit to the wall with screws.

• Do not mount it on any metal surface or UPVC door

frame.

Door Chime Installation

Place the Door Chime unit on any table top or flat

surface, then it is ready to use.

Operation

• Press the button on the Push Button unit once, it sends

a wireless signal to the Door Chime and your Door

Chime unit will sound.

• Operate the Door Chime unit within the operation range,

test it before final installation.

Push Button unit

Power: 1 x 3volt Lithium battery (CR2032 - included)

Door Chime unit

Power: 2 x 1.5volt alkaline batteries (“AA”, UM3 & LR6 - not included)

Melody Selection

There are 8-melodies for selection -

1) Tubular 3-notes

2) Big Ben

3) Tubular 2-notes

4) Solo

5) Tubular Scare

6) Clarinet

7) Saxophone

8) Morning Dew

Additional Byron “SX” range products can be purchased for compatibility.

Digital Code Set Up

The Door Chime kit is equipped with an advanced random and self-learning operation coding ability therefore

no setting is needed. Read the following instructions before use.

1. First time operation:

After battery installation on the Push Button and Door Chime units, press the Push Button once and it will

generate a new operation code randomly and send a wireless signal to the Door Chime unit. The door chime

unit will sound to indicate that new operation code is registered and memorised.

2. Interference from a similar unit operating nearby:

a) Simply remove the batteries from the Push Button and Door Chime units and rest for 10 seconds, this

will erase the memory.

b) Insert the batteries into the Push Button and the Door Chime units, the door chime unit will give 2-beeps

to indicate that it is ready for the new code registration. Press the Push Button once, it will generate a

new operation code randomly and send a wireless signal to the Door Chime and it will sound to indicate

that new operation code is registered and memorised.

3. Front and back door Bell Push operation:

a) Remove the batteries from the Push Buttons (Front & Back Door) and Door Chime units and rest for 10

seconds, it will erase the memory.

b) Insert the batteries into the Push Buttons and Door Chime units; the door chime unit will give 2-beeps to

indicate that it is ready for the new code registration.

c) Press the front door Push Button once, it will generate a new operation code randomly and send a

wireless signal to the door chime unit and it will sound to indicate that a new operation code is registered

and memorised.

d) After, (within 2 minutes) press the back door Push Button once, it will generate a new operation code

randomly and send a wireless signal to the door chime unit and it will sound to indicate that new

operation code is registered and memorised. The door chime unit has the ability to memorise both

operation codes.

e) Test to ensure correct operation before final installation.

Door Chime Operation

The function (Mode) selector is located at the back of the unit; press the button to select one of the following

functions to operate the chime unit accordingly:

a) Sound and Light: The Door chime will sound as well as the Super Bright LED Light will flash to maximizing

attention

b) Light Only: The Super Bright LED Light on the Door Chime unit will flash

c) Sound Only: Door Chime unit will sound

The door chime will start operate at “Sound Only” function initially.

For repeat sound, press the button again. Holding the button in will NOT repeat the sound.

Byron No.SX1B/SX1R Size: A4 Date: 11 Oct 2007

Mode Light Volume

Melody Selector

Melody Selection

Press the melody selector once to select a melody as

your door chime sound. There is a total of 8 melodies

for selection:

1) Tubular 3-notes

2) Big Ben

3) Tubular 2-notes

4) Solo

Additional Byron “SX” range products can be purchased

for compatibility.

5) Tubular Scare

6) Clarinet

7) Saxophone

8) Morning Dew

Adjust the volume

Use a small flat screwdriver to adjust the sound volume.

Mode Selector

Press the mode selector to select the following functions:

a)Sound and Light b) Light Only c) Sound Only

Flashing Light Pattern

When (a) Sound + Light, OR (b) Light Only mode is selected, press the flashing light pattern button “Light” at

the back of the chime unit to select the operation in the following pattern:

1) Sound + Light mode - When the door chime sound, it will flash in following pattern:

a) Slow flashing for 5 seconds

b) Fast flashing for 5 seconds

c) Flashing intermittent, 2 seconds “On”, 1 second “Off” and 2 seconds “On” again

2) Light Only mode - The door chime will flash in following pattern without the chime sound:

a) Slow flashing for 10 seconds

b) Fast flashing for 10 seconds

c) Flashing intermittent, 2 seconds “On”, 1 second “Off” and 2 seconds “On” again for 2 times.

Important

1. Do not mount either unit close to fireplace or expose to high temperatures.

2. Do not expose the Door Chime unit to direct sunlight or moisture

3. Always use alkaline battery. Please dispose of old, defective batteries in an environmentally friendly manner

in accordance with the relevant legislation.

4. Make sure that no naked flame sources, such as lighted candles, should be placed on the unit.

5. The unit should not be exposed to dripping or splashing and no objects filled with liquids, such as vases,

should be placed on the unit.

6. Replace only with the same or equivalent type of battery that is recommended by the CAUTION:

manufacturer.

7. Make sure batteries are installed correctly as per the internal markings.CAUTON:

8. Danger of explosion if battery is incorrectly installed or replaced.CAUTION:

9. IMPORTANT: There are no serviceable parts in the units, do not attempt to repair it.

Trouble Shooting & User Hints

In case of the door chime unit does not sound, please check the followings:

a) Flat batteries in either Push Button or Door Chime units - change the batteries.

b) Wrong battery polarity in either Push Button or Door Chime units - re-insert the batteries.

c) Push Button and Door Chime units are not on the same operation codes - re-set the code (see digital code

set up).

d) Units are out of range - Operate the Chime unit within the operation range.

Specification

Operating Temperature: -10C - +40C

Operating Distance: 100metre (330ft approx. - in open field & at suitable condition)

Selectable Tone: Total Eight (8) melodies available

Selectable Digital Code: Total two hundred fifty six (256) possible digital codes

“Type R2 Device - device where the sound output is created by the

initial operation of the control and where the period of sound

output continues for the designed duration irrespective of

condition of the control.”

Signal Sent Indicator Light

433MHz

R&TTE

APPROVED

CH Byron Electrical United Kingdom. www.chbyron.com

CH Byron Electrical Ltd

Byron House

34 Sherwood Rd, Astonfield

Bromsgrove, B60 3DR

Tel: 0845 2301231

e: support@chbyron.com

w: www.chbyron.com

Produktspecifikationer

Varumärke:	Elro
Kategori:	Dörrklocka
Modell:	SX-1R
Färg på produkten:	Zwart
Vikt:	5000 g
Bredd:	150.9 mm
Djup:	98.6 mm
Höjd:	64.8 mm
Förpackningens vikt:	5700 g
Förpackningens bredd:	245 mm
Djuppackning:	180 mm
Förpackningshöjd:	230 mm
Batteri/Batterispänning:	24 V
Batterij capaciteit:	9 Ah
Förvaringstemperatur:	-15 - 45 °C
Förvaringsfuktighet:	0 - 95 procent
Antal batterier ingår:	- stuk(s)
Höjd, drift:	0 - 2000 m
Drifttemperatur (TT):	0 - 40 °C
Relativ luftfuktighet i drift (VV):	0 - 90 procent