EverFocus EBD930 Bruksanvisning

EverFocus övervakningskamera EBD930

Läs nedan 📖 manual på svenska för EverFocus EBD930 (16 sidor) i kategorin övervakningskamera. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/16
EBD930 eZ.HD Series
720p Analog High Denion
True Day/Night Outdoor IR Ball Camera
User’s Manual
Copyright © EverFocus Electronics Corp,
Release Date: Nov., 2014
2
Precauons
1. Do not install the camera near electric or magnec elds. Install the camera away from
TV/radio transmiers, magnets, electric motors, transformers and audio speakers since the
electromagnetic elds generated from these devices may distort the video image or
otherwise interfere with camera operaon.
2. Never disassemble the camera beyond the recommendaons in this manual nor introduce
materials other than those recommended herein. Improper disassembly or introducon of
corrosive materials may result in equipment failure or other damage.
3. Try to avoid facing the camera toward the sun. In some circumstances, direct sunlight may
cause permanent damage to the sensor and/or internal circuits, as well as creang
unbalanced illuminaon beyond the capability of the camera to compensate.
4. Keep the power cable away from water and other liquids and never touch the power cord
with wet hands. Touching a wet power cord with your hands or touching the power cord
with wet hands may result in electric shock.
5. Never install the camera in areas exposed to oil, gas or solvents. Oil, gas or solvents may
result in equipment failure, electric shock or, in extreme cases, re.
6. Cleaning. For cameras with interchangeable lenses, do not touch the surface of the sensor
directly with the hands. Use lens ssue or a coon pped applicator and ethanol to clean
the sensor and the camera lens. Use a damp so cloth to remove any dirt from the camera
body. Please do not use complex solvents, corrosive or abrasive agents for cleaning of any
part of the camera.
7. Do not operate the camera beyond the specied temperature, humidity or power source
rangs. This camera is suitable for indoor operaon only. Use the camera at temperatures
within -10°C~50 (14°F~1 °F) and humidity less than 80%; this device is not rated as °C 22
submersible. The input power source is 12VDC. Be sure to connect the proper + / - polarity
and voltage, as incorrect polarity or too high a voltage will likely cause the camera to fail,
and such damage is not covered by the warranty.
8. Mounng. Use care in selecng a solid mounng surface which will support the weight of
the camera plus any wind, snow, ice or other loading, and securely attach the camera to the
mounng surface using screws and anchors which will properly support the camera. If
necessary (e.g. when mounng to drop ceilings) use a safety wire to provide addional
support for the camera.
3
Safety Noce
Federal Communicaon Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instrucons, may cause harmful interference to radio communicaons. However, there is no
guarantee that interference will not occur in a parcular installaon. If this equipment does
cause harmful interference to radio or television recepon, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separaon between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Cauon: Any changes or modicaons not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two
condions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operaon.

Produktspecifikationer

Varumärke: EverFocus
Kategori: övervakningskamera
Modell: EBD930

Behöver du hjälp?

Om du behöver hjälp med EverFocus EBD930 ställ en fråga nedan och andra användare kommer att svara dig


övervakningskamera EverFocus Manualer

EverFocus

EverFocus EIVP-KBU-IV-V0004 Bruksanvisning

9 September 2024
EverFocus

EverFocus EDN468ME Bruksanvisning

9 September 2024
EverFocus

EverFocus ECZ330 Bruksanvisning

9 September 2024
EverFocus

EverFocus EHD300 Bruksanvisning

9 September 2024
EverFocus

EverFocus EI350 Bruksanvisning

9 September 2024
EverFocus

EverFocus EZN3160 Bruksanvisning

8 September 2024
EverFocus

EverFocus EZ600 Bruksanvisning

8 September 2024
EverFocus

EverFocus EPTZ9200 Bruksanvisning

8 September 2024
EverFocus

EverFocus Polestar II EQ610 Bruksanvisning

8 September 2024
EverFocus

EverFocus EFD300 Bruksanvisning

8 September 2024

övervakningskamera Manualer

Nyaste övervakningskamera Manualer

Speco Technologies

Speco Technologies WDRB11H Bruksanvisning

27 Oktober 2024
Vivotek

Vivotek AI-108 Bruksanvisning

27 Oktober 2024
Acti

Acti E88 Bruksanvisning

27 Oktober 2024
Yale

Yale WIPC-303W Bruksanvisning

27 Oktober 2024
Grandstream

Grandstream GXV3611IR_HD Bruksanvisning

27 Oktober 2024
Airlive

Airlive DM-720 Bruksanvisning

27 Oktober 2024
Speco Technologies

Speco Technologies O8B7M Bruksanvisning

27 Oktober 2024
Grandstream

Grandstream GXV3615W Bruksanvisning

27 Oktober 2024
Vivotek

Vivotek IP8133 Bruksanvisning

27 Oktober 2024
Olympia

Olympia OC 1280P Bruksanvisning

27 Oktober 2024